Distance-dependent signal intensity in immunoassay by attenuated total reflection-surface enhanced infrared absorption spectroscopy is demonstrated by controlling the distance of target proteins away from the enhancement substrate. Based on this optical near-field effect, sensitive detection of protein molecules with a detection limit of 0.6 nM and investigation of the kinetics and thermodynamics of protein–aptamer/antibody interactions can be achieved.
Oil saturation is an important parameter in shale-oil reservoir evaluation. However, due to complex wettability and pore construction, we find that conventional resistivity and nuclear magnetic resonance (NMR) methods do not perform well in calculating oil saturation in shale-oil reservoirs. Hence, we have developed a practical NMR-based method to calculate the oil saturation of the Lucaogou shale-oil Formation, Permian, in Jimusar Sag, Junggar Basin, China. First, we analyze the relationships among the wettability, oil saturation, and T2 distribution based on the theoretical formula and core analysis data. Results indicate that the ratio of the surface area wetted by water and oil is approximately equal to the ratio of water saturation and oil saturation. So we conclude that oil is mainly stored in relatively bigger pores and the surface relaxivity of the oil-wet surface is lower than that of the water-wet surface, resulting in long relaxation signals, that is, the long relaxation signals of NMR T2 spectra of shale-oil reservoirs are primarily attributed to oil signals. We have made a series of NMR measurements of as-received samples and confirm this point. Thus, we propose a T2 cutoff for water and oil to calculate the oil saturation, and we determine 6 ms as the T2 cutoff based on the oil saturation analysis of cores and NMR logs. Finally, we verify and make application of our method and acquire good results.
The Lucaogou Formation in Jimuaser Sag of Junggar Basin, China is a typical tight oil reservoir with upper and lower sweet spots. However, the pore structure of this formation has not been studied thoroughly due to limited core analysis data. In this paper, the pore structures of the Lucaogou Formation were characterized, and a new method applicable to oil-wet rocks was verified and used to consecutively predict pore structures by nuclear magnetic resonance (NMR) logs. To do so, a set of experiments including X-ray diffraction (XRD), mercury intrusion capillary pressure (MICP), scanning electron microscopy (SEM) and NMR measurements were conducted. First, SEM images showed that pore types are mainly intragranular dissolution, intergranular dissolution, micro fractures and clay pores. Then, capillary pressure curves were divided into three types (I, II and III). The pores associated with type I and III are mainly dissolution and clay pores, respectively. Next, the new method was verified by “as received” and water-saturated condition T2 distributions of two samples. Finally, consecutive prediction in fourteen wells demonstrated that the pores of this formation are dominated by nano-scale pores and the pore structure of the lower sweet spot reservoir is more complicated than that in upper sweet spot reservoir.
This study investigated the influence of movable oil on the pore structure of various shale types, analyzing 19 shale samples from Well X in the Mahu Sag of the Junggar Basin. Initially, X-ray diffraction (XRD) analysis classified the shale samples. Subsequently, the geochemical properties and pore structures of the samples, both pre and post oil Soxhlet extraction, were comparatively analyzed through Total Organic Carbon (TOC) content measurement, Rock-Eval pyrolysis, and nitrogen adsorption experiments. Additionally, fractal theory quantitatively described the impact of movable oil on the pore structure of different shale types. Results indicated higher movable oil content in siliceous shale compared to calcareous shale. Oil extraction led to a significant increase in specific surface area and pore volume in all samples, particularly in siliceous shale. Calcareous shale predominantly displays H2–H3 type hysteresis loops, indicating a uniform pore structure with ink-bottle-shaped pores. Conversely, siliceous shale exhibited diverse hysteresis loops, reflecting its complex pore structure. The fractal dimension in calcareous shale correlated primarily with pore structure, exhibiting no significant correlation with TOC content before or after oil extraction. Conversely, the fractal dimension changes in siliceous shale samples do not have a clear correlation with either TOC content or pore structure, suggesting variations may result from both TOC and pore structure.
Naturally fractured formations usually have strong heterogeneities. Drilling and production operations in such formations can involve unwanted formation failure risks such as wellbore collapse and wellbore fracturing. This study presents a coupled thermal-hydraulic-mechanical numerical model for near-well stress evolutions during drilling in naturally fractured formations. The evolution of pressure, temperature, and geo-mechanical responses on the wellbore wall and in the near-well region is simulated. The effects of wellbore pressure, internal friction angle, and natural fracture length on formation rock risks are discussed. A failure index is used to quantify the formation rock failure risks. The existence of natural fractures magnifies the heterogeneous system response induced by drilling. Increasing the wellbore pressure from a relatively low value can improve the support for the wellbore wall, which reduces the failure risks caused by shearing. In mechanically weak formations, the effect of natural fractures on formation rock failure becomes more significant. When the natural fracture length is large, the near-well region tends to have greater failure risks as the formations become more mechanically weak. This study provides a quantitative understanding of the effects of drilling and formation parameters on failure risks.