Distance-dependent signal intensity in immunoassay by attenuated total reflection-surface enhanced infrared absorption spectroscopy is demonstrated by controlling the distance of target proteins away from the enhancement substrate. Based on this optical near-field effect, sensitive detection of protein molecules with a detection limit of 0.6 nM and investigation of the kinetics and thermodynamics of protein–aptamer/antibody interactions can be achieved.
A 3-D frequency-selective rasorbers (FSR) with wide absorption bands at both sides of the transmission window based on stepped impedance resonator (SIR) is presented and investigated in this article. The proposed FSR features thin thickness, wide absorption bands and lumped-element-free characteristics. The transmission channel is constructed from a parallel waveguide based on SIR to provide the transmission path and reduce the thickness of the whole structure. The absorption channel is filled with magnetic absorber to provide a wide absorption band, while meander-line in shunt connection with the absorber is used to avoid lumped components and to obtain a low insertion loss at the passband. The detailed design concept and analysis are illustrated and the fundamental operating principle of the FSR is demonstrated with the help of an equivalent circuit model (ECM). A design example is provided and it exhibits a passband at 7.1 GHz with a transmission bandwidth of 22.6% for less than 3 dB insertion loss and fractional bandwidth of 128.0% with reflectivity less than -10 dB. Moreover, one dual-polarized FSR is also designed and analyzed to generalize the design strategy. Both single- and dual-polarized prototypes are designed, fabricated, and measured to verify the design concept. Good agreement can be observed between the simulated and measured results.
10 November 2021 in IEEE Transactions on Antennas and Propagation
In this communication, we propose a novel feeding scheme to design a wideband filtering patch antenna. The antenna is composed of two substrates: the feeding and the radiating ones. Two circular patches are etched on the top surface of the radiating substrate as the radiators and a hybrid substrate integrated waveguide (SIW) and spoof localized surface plasmon (SLSP) structure is used as the feeding scheme. Due to abundant resonant modes and filtering feature of the hybrid SIW-SLSP structure, the antenna can radiate under the triple-mode resonance with high filtering performance. Moreover, the proposed filtering antenna has an independently adjustable capability of both low-band and high-band radiation nulls. The presented antenna is designed, fabricated, and measured. The measured results reveal that the operating bandwidth reaches up to 11.3%, ranging from 7.44 to 8.33 GHz. The peak gain of 10 dBi is obtained in passband with 10 dB gain suppression out of the band. This approach provides a simple way to design wideband filtering patch antenna, which can be easily integrated with planar circuit.
A design of high-gain Fabry-Perot cavity (FPC) antenna is presented with non-uniform frequency selective surface (FSS) superstrate and electromagnetic band gap (EBG) reflecting ground. The non-uniform FSS superstrate and EBG ground are utilized to flexibly control the attenuation constant $\alpha $ over a large antenna aperture while ensuring the resonance condition of the FPC. The uniformity of the amplitude of the aperture field is improved significantly while obtaining appropriate radiation efficiency. Therefore, the high gain and high aperture efficiency can be achieved within a desirable bandwidth. The theoretical gain estimation is conducted to prove the superiority of the proposed antenna over a referenced uniform one. A straight-forward design methodology is proposed based on the radial leaky-wave theory and the modified transverse equivalent network (TEN) model. The non-uniform high-gain FPC antenna with a diameter of $6.6\lambda _{0}$ is designed at the frequency of 15 GHz. Simulated results show that a gain of 24.6 dBi with an aperture efficiency of 67.9% has been achieved. The measured gain is 24.0 dBi with an aperture efficiency of 58.4%. The 10dB return loss bandwidth and 3 dB gain bandwidth are 5.3% and 3.2%, respectively. The proposed antenna overcomes the limit on aperture efficiency and gain of conventional uniform FPC antennas, and the presented methodology can guide the design of two-dimensional non-uniform high-gain FPC antennas.
A compact low-profile differential filtering microstrip patch antenna with high selectivity and deep rejection using single-layer substrate is proposed. The presented antenna mainly consists of the quasi-H-shaped patch (QHSP) and the meandering quasi-T-shaped resonator (QTSR) which is composed of two open-end meandering arms in opposite direction and an inset coupling structure. To the best of our knowledge, a novel differential feeding structure is adopted for the first time that a pair of differential inset coupling feeding structures are placed in opposite direction to drive the QHSP with insetting-capacitive-coupling, simultaneously. Its equivalent lumped circuit is further analyzed to study the characteristics. In the point of views of filter and antenna design, the meandering QTSR not only acts as the first stage of resonator, but also a feed structure, and the QHSP can be treated as the last order of resonator as well as the radiator. A prototype of the proposed antenna is designed, analyzed, simulated and measured. Two controllable radiation nulls (RNs) locate at the both sides of the passband, a sharp skirt selectivity with the sideband roll-off rates of 667/182 dB/GHz and out-of-band suppressions of −40.1/−39 dB in lower and upper stopbands are achieved, respectively. The measured flat realized gain can be obtained in the passband with the average gain more than 6 dBi and the low cross-polarization level can be achieved. The dimension of the proposed antenna is only $0.361\lambda _{0} \times 0.426\lambda _{0} \times 0.013\lambda _{0}$ . Good agreement between the simulated and measured results is obtained, which verifies the proposed antenna with the differential feeding structure has excellent performance only using single layer low profile substrate. The proposed antenna is a good candidate for WLAN and power harvest application.
14 April 2023 in IEEE Transactions on Antennas and Propagation
A new design method of filtering circular patch antenna with good harmonic suppression is proposed in this paper. According to the analysis of field distributions of the resonant modes on circular patch, we initially reveal the mechanism of high-order modes suppression by introducing a pair of common mode (CM) exciting signals with equal amplitude and same phase at specific locations on the circular patch antenna. Afterwards, to implement this design concept, the exciting signals realized by a T-shaped microstrip feed line with two pairs of extra parallel arms are arranged on both sides of the circular patch antenna. Owing to this excitation scheme, the influence of harmonics of the antenna has been reduced and two zeros on both sides of the passband are achieved by the cross-coupling form. Besides, an enhanced bandwidth is also realized attributing to an additional resonant mode introduced by the extra parallel arms. Finally, in order to verify the feasibility of the developed scheme, a prototype filtering antenna is fabricated and tested. Measured results show that the demonstrator exhibits an impedance bandwidth of 10.2% (2.42 GHz-2.68 GHz). Inside the passband, the radiation patterns keep basically consistent and the realized gain (at Φ = 0° and θ = 0°) is stable at 7.5 dBi. Compared with the traditional filtering antenna, the harmonic suppression bandwidth in this work ranges to 3.2 f 0 ( f 0 is the center frequency of the antenna) while maintaining a low profile.