2 January 2024 in ACS Applied Optical Materials
9 July 2021 in IEEE Journal of Selected Topics in Quantum Electronics
Optical performances of 950 nm p-side up photonic crystal surface emitting lasers (PCSELs) with different types of air holes are numerically and experimentally investigated. Simulation results show an obvious distinction between effective index method and three dimensional finite-element method (FEM). Measured experiments including wavelength, threshold, and slope efficiency can well meet the FEM numerical predictions. It further reveals that the B mode dominates the laser action and the PCSELs accompanying with equilateral triangle and right isosceles triangle holes possess a lower threshold current and higher radiation than symmetric circle holes. The output power can be further enhanced by increasing the filling factor of air holes before the regrowth process.
7 May 2021 in Crystal Growth & Design
16 August 2022 in Journal of Lightwave Technology
Photonic-crystal surface-emitting laser (PCSEL) holds promise for laser beam with high efficacy while retain the small divergence angle, being now all the rage as laser source in modern opto-electronic technologies to replace edge emitting lasers and vertical-cavity surface-emitting lasers (VCSELs). Arbitrary beam shaping and deflection of VCSELs with ultra-thin flat optics, aka metasurfaces, has recently demonstrated, making possibility to realize a compact system in many technologies. However, the large divergence angle and limited output power at single fundamental mode of the VCSEL limits its application. Here, we report the static steering of laser beam with high efficiency and near 1o divergence angle by shining the laser beam of the PCSEL through the metasurface array placed on top. The small divergence angle is contributed from PCSEL. On the other hand, the metasurface array offers the higher efficiency beam deflection, without considering additional collimating or focusing. This provides highly flexible platform and is capable to manipulate the laser emission through the design of the metasurfaces and the PCSELs. Moreover, the beam proprieties can be further modified for specific application through the metasurfaces. The integration of metasurface with PCSEL provides the compact and collimated laser source, promising more accurate generation of versatile laser sources on demand for automotive ultra-compact light detection and ranging (LiDAR), depth sensing, optical communication, etc.
18 April 2024 in Journal of Lightwave Technology
In this study, we present high-performance photonic-crystal surface-emitting lasers (PCSELs) operating at short wavelength infrared (SWIR) band of approximately 1580 nm. These PCSELs demonstrate impressive output power exceeding 200 mW and exhibit a remarkably low divergence angle of approximately 1 degree. Through numerical simulations, we optimize the PCSEL design by analyzing threshold gain and loss components for various PC patterns. The experimental results confirm the PCSELs' high brightness and circular output beams. Our SWIR PCSELs offer promising solutions for critical applications, serving as a compelling alternative to traditional laser diodes. The elimination of distributed Bragg reflectors simplifies fabrication processes and holds potential for driving future advancements in laser technology.
28 November 2023 in ACS Photonics