29 September 2015 in Comptes Rendus. Physique
26 October 2017 in IEEE Antennas and Wireless Propagation Letters
This paper focuses on the HF (High Frequency) wireless power transfer (WPT) by electromagnetic induction and its dependence on the lateral misalignment and tilt of the small receiving coil relative to the transmitting coil. We combine two structures, the TLA (Twisted Loop Antenna) and sub-coils of a DDC (Distributed Diameter Coil) for transmitting designs. Our system is then referred as TLA-DDC. The radius of the sub-coils is parametrically varied for different distances between the coils and performed in two positions for each distance (coaxial position when the receiving coil is parallel to the plane of the transmitting coil, and center position for the perpendicular orientation of both coils). Then, using different radii for the transmitting DDC TLA when the receiving coil is moved onto its surface allows obtaining a greater value of efficiency at different positions: up to 2.4 times for the peak value and 1.5 for the average value for receiving coil in parallel plane. The efficiency of the magnetic coupling is determined by means of power efficiency with a comparison between the DDC TLA antennae and a standard coil antenna corresponding to the same inductance value.
19 March 2018 in IET Microwaves, Antennas & Propagation
In this study, a reader antenna including resonators is proposed to improve detection of a small moving tag in the case of tracking a radiofrequency identification (RFID) system. The near‐field RFID technology is based on load modulation, the input impedance on the reader coil and the mutual inductance between the reader and tag coils are the main parameters for performing detection. They are calculated from the impedance matrix parameters. The added resonators change all the parameters of the impedance matrix consequently the input impedance and mutual inductance are also changed. In this study, analytical formulation defining the equivalent impedance matrix parameters is developed. These formulae are used to evaluate the performance of the proposed design according to the tag misalignment (lateral and angular). From the calculation and simulation results, a frequency shift in the equivalent input impedance is found. To avoid this problem, optimising the positioning of the resonators on the reader coil is performed. This study is confirmed by measures of RFID detection for a reader prototype (with and without resonators) and a small commercial tag. Both the surface and volume of detection of the small moving tag (lateral and angular misalignment) are improved by the principle of added resonators.
1 January 2018 in Progress in Electromagnetics Research C