Rihachiro Nakashima

Rihachiro Nakashima

Auto-generated profile, based on publicly available information

Rihachiro Nakashima

School of Integrated Design Engineering, Graduate School of Science and Technology, Keio University, 3-14-1 Hiyoshi, Kouhoku-ku, Yokohama, Kanagawa 223-8522, Japan

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 May 2024 in Journal of Microelectromechanical Systems
Verified
Journal Article
Open access
YOYuki Okamoto
Yuki Okamoto
RNRihachiro Nakashima
Rihachiro Nakashima
RORyo Oda
Ryo Oda
TNThanh Vinh Nguyen
Thanh Vinh Nguyen
YTYusuke Takei
Yusuke Takei
HOHironao Okada
Hironao Okada
Conventional electromagnetic microelectromechanical system scanners require a biaxial (two-axis) external magnetic field to obtain a biaxial torque, which increases the number of bulky external permanent magnets and the packaging size caused by 45 $^{\circ}$ -orientated placement of permanent magnets. Thus, this study developed a two-axis resonant electromagnetic scanner with an asymmetric gimbal frame that generates two-axis torque via a one-axis lateral external magnetic field. As external permanent magnets can be placed parallel to the device die, the proposed method reduced the packaging size. Two driving forces were generated by two independent electromagnetic actuators placed on both sides of the asymmetric gimbal frame, which converted the unidirectional forces into two-axis torque. As the two driving actuators were independent of the connecting beams, gimbal frame, and mirror and were connected to the thick outer Si handle frame, the temperature increase of torsion beams and the asymmetric gimbal frame, which affects the resonant performance, were reduced. Additionally, as the current paths were not multiturn coil shapes, the paths can be formed with a via-less single metal layer. Also, the drive circuit can be simplified since drive signals for two-axis rotation can be applied to individual actuators. We demonstrated biaxial scanning using the proposed structure with a 4-mm mirror. The optical scanning angle was 4.84 $^{\circ}$ for the 1.308 kHz X-axis scan and 16.1 $^{\circ}$ for the 2.568 kHz Y-axis scan when a current of 300 mA was applied independently to the X-and Y-axes driving actuators. We obtained the large displacement at the resonant frequency using the asymmetric gimbal frame under a lateral magnetic field. 2024-0050

28 January 2025 in IEEE Sensors Journal
Verified
Journal Article
Closed access
RORyo Oda
Ryo Oda
RNRihachiro Nakashima
Rihachiro Nakashima
HTHidetoshi Takahashi
Hidetoshi Takahashi
Until now, various types of pressure sensors, including piezoresistive and capacitive types, have been developed using the technology of microelectromechanical systems. However, many of these sensors require complex fabrication processes, making it challenging to form 3D shapes. In contrast, laser-induced graphene (LIG) shows promise for use in various physical sensors due to its high sensitivity as a piezoresistive material and its simple fabrication process. Polyimide substrates, commonly used for LIG formation, can be easily grooved and cut by UV lasers, allowing for the fabrication of 3D shapes. In this study, we propose a two-gauge corrugated-type pressure sensor with LIG strain gauges on both the top and back sides of a polyimide substrate featuring a corrugated structure. The fabrication process involves using a UV laser to fabricate the corrugated structure and a CO2 laser to form the LIG strain gauges. This simple process produced a sensor with dimensions of 10 mm in length, 15 mm in width, and a total thickness of 6 mm. The corrugated sensor deformed 1.8 times more under pressure and demonstrated three times greater sensitivity than the membrane-type polyimide sensor. This approach is effective for low volume production of a large variety of sensors in laboratories because it enables simple design and fabrication using only two types of lasers.

1 December 2025 in Applied Physics Express
Verified
Journal Article
Open access
PDF file
YOYuki Okamoto
Yuki Okamoto
RNRihachiro Nakashima
Rihachiro Nakashima
RORyo Oda
Ryo Oda
KOKei Ohara
Kei Ohara
SSSoya Sato
Soya Sato
YTYusuke Takei
Yusuke Takei
Piezoelectric actuators are integral to microelectromechanical systems (MEMS) scanners, but phase errors can impair laser scanning accuracy. This study addresses these errors through direct compensation methods, eliminating the need for embedded phase-detection sensors, which complicate fabrication and design. Specifically, we explored the influence of driving-signal modulation on the phase shift between the applied voltage and resulting scanning angle. Our experiments reveal that adjusting the phase difference yields the best compensation, effectively reducing phase error while maintaining scanning performance. These results validate a sensorless approach to improve laser scanning precision in piezoelectric MEMS scanners without added fabrication complexity.

5 September 2024 in Journal of Micromechanics and Microengineering
Verified
Journal Article
Open access
YOYuki Okamoto
Yuki Okamoto
RNRihachiro Nakashima
Rihachiro Nakashima
RORyo Oda
Ryo Oda
SGSucheta Gorwadkar
Sucheta Gorwadkar
YTYusuke Takei
Yusuke Takei
HOHironao Okada
Hironao Okada
This study presents a compact 3.8 × 3.8 mm2 resonant piezoelectric micro-electro-mechanical systems scanner featuring a 1.0 mm mirror and double-coupling frames. It employs a novel mechanical coupling of two Pb(Zr,Ti)O3 piezoelectric actuators–fork-shaped and ring-shaped. This dual-actuator configuration enhances the efficiency of actuator area usage per die and significantly improves the resonant frequency through their mechanical coupling. Additionally, the design strategy effectively reduces mechanical stress by operating the scanning frequency above those of other modes. The resonant frequency achieved by the proposed scanner is 27.09 kHz, with an optical scan angle of 40∘, utilizing a unipolar driving voltage of 25.2 V.

1 February 2026 in Journal of Micromechanics and Microengineering
Verified
Journal Article
Closed access
MFMasahiro Fukuta
Masahiro Fukuta
RNRihachiro Nakashima
Rihachiro Nakashima
TKTetsuo Kan
Tetsuo Kan
HTHidetoshi Takahashi
Hidetoshi Takahashi
In this study, we propose a method to enhance the actuation performance of an acoustically driven microelectromechanical systems (MEMSs) mirror that incorporates a parallel Helmholtz resonator (HR) array. Acoustic actuation enables a simple and noncontact device structure without on-chip actuating elements, which is particularly advantageous for mirror-based optical sensing devices that integrate surface-functional structures. However, the inherently limited energy of acoustic waves restricts the achievable vibration amplitude. Here, we propose inserting an HR array between the MEMS mirror and the acoustic source. The HR array selectively amplifies acoustic waves near its resonant frequency, and the acoustic actuation of the mirror is enhanced when this frequency matches its mechanical resonant frequency. A Si piezoresistive cantilever-type mirror was fabricated, and HR arrays were 3D-printed. Among configurations containing from one to six HRs, the six-HR array provided the highest amplification, nearly doubling the amplitude compared that obtained without using an HR. This approach offers a compact solution for large-amplitude MEMS actuation with potential applications in optical sensing and imaging.

14 January 2026 in Journal of Micromechanics and Microengineering
Verified
Journal Article
Closed access
RNRihachiro Nakashima
Rihachiro Nakashima
YOYuki Okamoto
Yuki Okamoto
YTYusuke Takei
Yusuke Takei
TKTetsuo Kan
Tetsuo Kan
HTHidetoshi Takahashi
Hidetoshi Takahashi
Piezoresistive MEMS multi-axis force sensors are widely utilized owing to their high sensitivity and compact form factor. In multi-axis sensing applications, it is essential to measure forces along each axis simultaneously while minimizing crosstalk. To achieve this, forming piezoresistive layers not only on the device surface for out-of-plane force detection but also on the sidewalls for in-plane force detection is highly effective. However, patterning piezoresistive layers on sidewalls remains technically challenging using conventional lithography-based MEMS fabrication processes, thereby increasing fabrication complexity and limiting design flexibility. In contrast, laser doping enables localized and selective formation of piezoresistive layers, offering a promising approach to overcome these limitations. In this study, we propose a piezoresistive cantilever for in-plane force measurement fabricated using liquid-immersion laser sidewall doping. The proposed process consists of two main steps: device structure formation through laser processing and sidewall piezoresistive layer formation via liquid-immersion laser doping. This approach enables direct and selective patterning of piezoresistive layers on device sidewalls. To verify the effectiveness of the proposed method, the electrical and mechanical characteristics of the fabricated sensor were evaluated. The piezoresistive layer exhibited a gauge factor exceeding 13, demonstrating sufficient performance for practical sensing applications.