1 April 2014 in Advanced Materials
2 August 2012 in ACS Nano
We demonstrate the possibility in quantifying the Raman intensities for both specimen and substrate layers in a common stacked experimental configuration and, consequently, propose a general and rapid thickness identification technique for atomic-scale layers on dielectric substrates. Unprecedentedly wide-range Raman data for atomically flat MoS2 flakes are collected to compare with theoretical models. We reveal that all intensity features can be accurately captured when including optical interference effect. Surprisingly, we find that even freely suspended chalcogenide few-layer flakes have a stronger Raman response than that from the bulk phase. Importantly, despite the oscillating intensity of specimen spectrum versus thickness, the substrate weighted spectral intensity becomes monotonic. Combined with its sensitivity to specimen thickness, we suggest this quantity can be used to rapidly determine the accurate thickness for atomic layers.
17 July 2013 in Nano Letters
Two-dimensional semiconductors are structurally ideal channel materials for the ultimate atomic electronics after silicon era. A long-standing puzzle is the low carrier mobility (μ) in them as compared with corresponding bulk structures, which constitutes the main hurdle for realizing high-performance devices. To address this issue, we perform a combined experimental and theoretical study on atomically thin MoS2 field effect transistors with varying the number of MoS2 layers (NLs). Experimentally, an intimate μ–NL relation is observed with a 10-fold degradation in μ for extremely thinned monolayer channels. To accurately describe the carrier scattering process and shed light on the origin of the thinning-induced mobility degradation, a generalized Coulomb scattering model is developed with strictly considering device configurative conditions, that is, asymmetric dielectric environments and lopsided carrier distribution. We reveal that the carrier scattering from interfacial Coulomb impurities (e.g., chemical residues, gaseous adsorbates, and surface dangling bonds) is greatly intensified in extremely thinned channels, resulting from shortened interaction distance between impurities and carriers. Such a pronounced factor may surpass lattice phonons and serve as dominant scatterers. This understanding offers new insight into the thickness induced scattering intensity, highlights the critical role of surface quality in electrical transport, and would lead to rational performance improvement strategies for future atomic electronics.
1 January 2008 in IEEE Transactions on Electron Devices
An effective way to reduce supply voltage and resulting power consumption without losing the circuit performance of CMOS is to use CMOS structures using high carrier mobility/velocity. In this paper, our recent approaches in realizing these carrier-transport-enhanced CMOS will be reviewed. First, the basic concept on the choice of channels for increasing on current of MOSFETs, the effective-mass engineering, is introduced from the viewpoint of both carrier velocity and surface carrier concentration under a given gate voltage. Based on this understanding, critical issues, fabrication techniques, and the device performance of MOSFETs using three types of channel materials, Si (SiGe) with uniaxial strain, Ge-on-insulator (GOI), and III-V semiconductors, are presented. As for the strained devices, the importance of uniaxial strain, as well as the combination with multigate structures, is addressed. A novel subband engineering for electrons on (110) surfaces is also introduced. As for GOI MOSFETs, the versatility of the Ge condensation technique for fabricating a variety of Ge-based devices is emphasized. In addition, as for III-V semiconductor MOSFETs, advantages and disadvantages on low effective mass are examined through simple theoretical calculations.
3 February 2015 in Nano Letters
27 October 2003 in Applied Physics Letters
A strained Ge-on-insulator (GOI) structure with a 7-nm-thick Ge layer was fabricated for applications to high-speed transistors. The GOI layer was formed by thermal oxidation of a strained SiGe layer grown epitaxially on a silicon-on-insulator (SOI) wafer. In transmission electron microscopy measurements, the obtained GOI layer exhibited a single-crystal structure with the identical orientation to an original SOI substrate and a smooth interface. The rms of the surface roughness of the GOI layer was evaluated to be 0.4 nm by atomic force microscopy. The residual Si fraction in the GOI layer was estimated to be lower than the detection limit of Raman spectroscopy of 0.5% and also than the electron energy loss spectroscope measurements of 3%. It was found that the obtained GOI layer was compressively strained with a strain of 1.1%, which was estimated by the Raman spectroscopy. Judging from the observed crystal quality and the strain value, this technique is promising for fabrication of high-mobility strained Ge channel of high-performance GOI metal–insulator–semiconductor (MIS) transistors.