Resonant modulators encode electrical data onto wavelength-multiplexed optical carriers. Today, silicon microring modulators are perceived as promising to implement such links; however, they provide limited bandwidth and need thermal stabilization systems. Here we present plasmonic micro-racetrack modulators as a potential successor of silicon microrings: they are equally compact and compatible with complementary-metal–oxide–semiconductor-level driving voltages, but offer electro-optical bandwidths of 176 GHz, a 28 times improved stability against operating temperature changes and no self-heating effects. The temperature-resistant organic electro-optic material enables operation at 85 °C device temperature. We show intensity-modulated transmission of up to 408 Gbps at 12.3 femtojoules per bit with a single resonant modulator. Plasmonic micro-racetrack modulators offer a solution to encode high data rates (for example, the 1.6 Tbps envisioned by next-generation communications links) at a small footprint, with low power consumption and marginal, if no, temperature control.
A deep learning (DL) based digital backpropagation (DBP) method with a 1 dB SNR gain over a conventional 1 step per span DBP is demonstrated in a 32 GBd 16QAM transmission across 1200 km. The new DL-DPB is shown to require 6 times less computational power over the conventional DBP scheme. The achievement is possible due to a novel training method in which the DL-DBP is blind to timing error, state of polarization rotation, frequency offset and phase offset. An analysis of the underlying mechanism is given. The applied method first undoes the dispersion, compensates for nonlinear effects in a distributed fashion and reduces the out of band nonlinear modulation due to compensation of the nonlinearities by having a low pass characteristic. We also show that it is sufficient to update the elements of the DL network using a signal with high nonlinearity when dispersion or nonlinearity conditions changes. Lastly, simulation results indicate that the proposed scheme is suitable to deal with impairments from transmission over longer distances.
4 February 2022 in Journal of Lightwave Technology
A transparentOptical-subTHz-Optical link providing record-high single line rates of 240 Gbit/s and 192 Gbit/s on a single optical carrier over distances from 5 to 115 m is demonstrated. Besides a direct mapping of the optical to a 230 GHz subTHz-carrier frequency by means of a uni-traveling carrier (UTC) photodiode, we demonstrate direct conversion of data from the subTHz domain back to the optical domain by a plasmonic modulator. It is shown that the subTHz-to-optical upconversion can even be performed at good quality without any electrical amplifiers. Finally, at the receiver, the local oscillator is employed to directly map the optical signal back to the electrical baseband within a coherent receiver.
We present a plasmonic platform featuring efficient, broadband metallic fiber-to-chip couplers that directly interface plasmonic slot waveguides, such as compact and high-speed electro-optic modulators. The metallic gratings exhibit an experimental fiber-to-slot coupling efficiency of −2.7 dB with −1.4 dB in simulations with the same coupling principle. Further, they offer a huge spectral window with a 3 dB passband of 350 nm. The technology relies on a vertically arranged layer stack, metal–insulator–metal waveguides, and fiber-to-slot couplers and is formed in only one lithography step with a minimum feature size of 250 nm. As an application example, we fabricate new modulator devices with an electro-optic organic material in the slot waveguide and reach 50 and 100 Gbit/s data modulation in the O- and C-bands within the same device. The devices’ broad spectral bandwidth and their relaxed fabrication may render them suitable for experiments and applications in the scope of sensing, nonlinear optics, or telecommunications.
24 October 2018 in Journal of Lightwave Technology
We propose and demonstrate a new low-complexity hardware architecture and digital signal processing (DSP) implementation for coherent reception of Nyquist frequency division multiplexed (Nyquist-FDM, digital subcarrier multiplexing) signals in real-time. Key to achieve lowest complexity is the combination of an optimized frequency domain and time domain processing block. In the frequency domain processing we combine subcarrier equalization and timing recovery with a non-integer oversampling ratio of 16/15. In the time domain, we take advantage of polar coordinate processing for the carrier recovery to avoid complex multiplications. The receiver is optimized for flexible operation and allows the adaption of filter coefficients and modulation format between 4QAM, hybrid 4/16QAM, and 16QAM within one clock cycle. The efficiency of the DSP is demonstrated by a real-time coherent receiver implementation on a single FPGA and is experimentally evaluated. Despite of the limited hardware resources, the receiver can detect a 30 GBd Nyquist-FDM signal with four subcarriers and a net data rate of 60 Gbit/s (4QAM), 90 Gbit/s (4/16QAM), or 120 Gbit/s (16QAM) sampled with 32 GSa/s and demodulate one of the subcarriers at a time. Transmission of 300 km through SSMF is demonstrated with a BER below the soft-decision forward error correction (SD-FEC) limit.
This study presents a comparison between resonant and non-resonant electro-optical modulator configurations. The focus lies on finding the configuration with the highest modulation amplitude at the lowest drive voltage while achieving a large electro-optical bandwidth. It is found that the ring-assisted Mach-Zehnder modulator (RaMZM) offers chirp-free and resonantly enhanced modulation without bandwidth limitations imposed by the ring. In contrast, a racetrack modulator (RTM) offers resonant enhancement at the cost of a chirped modulated signal and with a bandwidth limitation. The traditional non-resonant Mach-Zehnder modulator (MZM) configuration requires higher modulation voltages while offering chirp-free operation with a flat frequency response. The RaMZM, therefore, looks like an ideal candidate for encoding information in backbone networks where small modulation voltages and perfect control over the phase of a signal are needed. The results are supported by experiments that show driverless plasmonic modulation at 220 GBaud 2PAM, 160 GBaud 4PAM and 100 GBaud 8PAM with record low peak voltages of 0.5 V.