26 July 2024 in Acta Materialia
3 August 2025 in Steel Research International
Direct reduction of iron involves complex, multiscale phenomena, encompassing solid‐state phase transformations and gas transport through pores that must be accurately represented for predictive industrial implementation. Here, we present a thermodynamically sound pellet‐scale model that describes these mechanisms and can serve as a foundation for improving the understanding of pellet reduction kinetics in H2/CO‐containing atmospheres. The model assumes that the gas phase remains in thermodynamic equilibrium instantly adjusting to any changes in composition. This reduces the number of fitting parameters drastically compared to other existing models, while maintaining a strict thermodynamic upper bound estimate. A driving force term is included in the reaction rate equation ensuring that the three iron oxide reduction steps and the formation of graphite and cementite in carbon‐containing gases occur only if they are thermodynamically possible. It is demonstrated that fitting kinetic parameters based on conversion degree data alone leads to overfitting. This is true both for existing models and the model introduced here, despite the fact that the latter contains fewer parameters. To overcome this overfitting problem, spatially resolved microstructural data at key reduction stages can be considered, as shown here for recently reported data for a pellet reduced in H2 atmosphere.
14 October 2026 in Advanced Materials
Rare‐earth permanent magnets (REPMs) are crucial for electric vehicles, wind turbines, and other high‐efficiency electric motor systems. However, their production is energy‐intensive, and global recycling rates are below 0.2%. Machining swarf is the main industrial waste from REPMs production. Despite its high rare‐earth elements (REEs) content (∼20 wt.%), it has received limited attention for sustainable recycling. We introduce hydrogen plasma reduction (HPR) as a new environmentally friendly method to recover REEs from REPM swarf. By tuning the hydrogen content and treatment time, we achieve phase separation into metallic Fe and a Nd 2 O 3 ‐rich rare‐earth fraction, providing a concentrated intermediate for subsequent REPM production. The process also enables direct rare‐earth hydride formation, confirming the plasma‐assisted partial rare‐earth metallization in the molten state. This procedure turns REPM swarf into separated, high‐value, high‐purity feedstock in a single, acid‐free step. Against the ∼70 kg CO 2 ‐eq kg −1 footprint of conventional REPM production, this recycling route offers a pathway toward substantially lower‐emission magnet production while reducing reliance on primary REE supply.