Shandong Provincial Key Laboratory for Science of Material Creation and Energy Conversion Science Center for Material Creation and Energy Conversion Institute of Frontier Chemistry School of Chemistry and Chemical Engineering Shandong University Qingdao P. R. China
Auto-generated profile, based on publicly available information
Guoxing Li
Shandong Provincial Key Laboratory for Science of Material Creation and Energy Conversion Science Center for Material Creation and Energy Conversion Institute of Frontier Chemistry School of Chemistry and Chemical Engineering Shandong University Qingdao P. R. China
We have demonstrated a methodology to generate large area graphdiyne films with 3.61 cm2 on the surface of copper via a cross-coupling reaction using hexaethynylbenzene. The device based on graphdiyne films for measurement of electrical property is fabricated and shows conductivity of 2.516 × 10−4 S m−1 indicating a semiconductor property.
Sulfur is a promising cathode material for lithium–sulfur batteries because of its high theoretical capacity (1,675 mA h g−1); however, its low electrical conductivity and the instability of sulfur-based electrodes limit its practical application. Here we report a facile in situ method for preparing three-dimensional porous graphitic carbon composites containing sulfur nanoparticles (3D S@PGC). With this strategy, the sulfur content of the composites can be tuned to a high level (up to 90 wt%). Because of the high sulfur content, the nanoscale distribution of the sulfur particles, and the covalent bonding between the sulfur and the PGC, the developed 3D S@PGC cathodes exhibit excellent performance, with a high sulfur utilization, high specific capacity (1,382, 1,242 and 1,115 mA h g−1 at 0.5, 1 and 2 C, respectively), long cycling life (small capacity decay of 0.039% per cycle over 1,000 cycles at 2 C) and excellent rate capability at a high charge/discharge current.
Lithium metal is a promising anode candidate for the next-generation rechargeable battery due to its highest specific capacity (3860 mA h g−1) and lowest potential, but low Coulombic efficiency and formation of lithium dendrites hinder its practical application. Here, we report a self-formed flexible hybrid solid-electrolyte interphase layer through co-deposition of organosulfides/organopolysulfides and inorganic lithium salts using sulfur-containing polymers as an additive in the electrolyte. The organosulfides/organopolysulfides serve as “plasticizer” in the solid-electrolyte interphase layer to improve its mechanical flexibility and toughness. The as-formed robust solid-electrolyte interphase layers enable dendrite-free lithium deposition and significantly improve Coulombic efficiency (99% over 400 cycles at a current density of 2 mA cm−2). A lithium-sulfur battery based on this strategy exhibits long cycling life (1000 cycles) and good capacity retention. This study reveals an avenue to effectively fabricate stable solid-electrolyte interphase layer for solving the issues associated with lithium metal anodes.