18 November 2020 in IEEE Transactions on Antennas and Propagation
This paper proposes a hybrid absorptive-diffusive frequency selective radome (AD-FSR), which has a broadband transmission window with wide absorption and diffusion bands located at two sidebands, respectively. The proposed hybrid AD-FSR consists of a resistive sheet and a bandpass frequency selective surface (FSS) integrated with a coding metasurface separated by a certain distance. The wide absorption band is realized by the combined effect of the resistive sheet and the FSS integrated with a metasurface as a reflector in its lower stopband, while a broad passband is obtained when the electromagnetic (EM) wave penetrates through the resistive sheet in the passband of the FSS. In the upper side of the passband, the EM wave is diffused to reduce the radar cross-section (RCS) of the surface by arranging the unit cell of the AD-FSR and its mirror based on the phase cancellation theory. Equivalent circuit and relevant theoretical formulas are utilized to better comprehend the physical mechanism of the proposed hybrid AD-FSR. A design example is then fabricated and measured, and the experimental results show that a broad transmission band is achieved from 6.92 to 13.12 GHz with a minimum insertion loss of 0.43 dB in a wide low reflectivity (|S11|< -10 dB) band from 2.24 to 18 GHz.
1 March 2021 in IEEE Transactions on Antennas and Propagation
A novel theory is proposed in this article to design a bandpass frequency-selective surface (FSS) with a stable angular response. Based on this theory, the performance of the structure is closely related to its tangential and normal components of permittivity and permeability. Theoretical formulas are derived to realize a high-efficiency transmission response with angular independence. To validate our design concept, an ultrawide-angle bandpass FSS with metallic strips and square patch printed on the dielectric substrate is designed, and it exhibits a characteristic impedance matching for nearly all incident angles from 0° to 80 °. Moreover, varactor diodes are mounted at the center of the square patch, and the transmission window can be tuned by changing the capacitance of the varactors from 6.07 to 6.61 GHz without affecting its ultrawide-angle characteristic. Finally, a prototype of the tunable ultrawide-angle bandpass FSS is fabricated and measured, and the experimental results are in satisfying agreement with the predicted ones.
19 July 2021 in IEEE Transactions on Antennas and Propagation
A cognitive antenna array, which is designed by using deep reinforcement learning (DRL) is proposed in this article to adapt to the complex electromagnetic environment. Specifically, the phased array antenna is utilized as the manipulatable component to achieve the characteristic of beam steering with the help of the DRL algorithm. We begin by establishing a DRL-based framework, which is comprised of a microprogrammed control unit, power divider, digital phase shifter, and the patch antenna array. In the DRL algorithm, the desired beam steering is obtained through trial-and-error interactions with the environment, which is required to observe predefined rewards based on the current state and action. Next, the system is trained to perform beam steering, and a set of hyperparameters of the deep neural network are obtained and stored for practical usage. A good agreement is achieved between the simulated and measured radiation patterns of the planar phased array antenna, which validates the DRL-based phase distribution regulation algorithm. Finally, the algorithm is implemented in the design process of a conformal phased array antenna, and it is shown that the measured radiation performance of the array is satisfactory for different beam scan angles.
9 January 2023 in IEEE Transactions on Antennas and Propagation
In this paper, a novel method for developing a dual-polarized broadband microwave absorber (MA) for use at an extremely oblique incidence angle is presented. A detailed theoretical analysis is performed and formulas are derived to obtain the required relative permittivity and permeability tensors to achieve dual-polarized absorption at an arbitrary oblique incidence angle. As a proof of concept, a broadband dual-polarized MA operating at an oblique angle of 75° is designed whose unit cell consists of a pair of rectangular patches and a rectangular loop embedded with four resistors. A prototype is fabricated and measured for verification. Both the measured and simulated results demonstrate that the proposed MA achieves more than 90% absorption within a broad frequency with a relative bandwidth of 61.2% for both transverse electric and transverse magnetic polarizations at an extremely oblique incidence angle of 75°.
11 January 2022 in IEEE Transactions on Antennas and Propagation
This article introduces an amplitude and phase independently adjustable transmitarray aperture with a thin profile and low cost to fabrication characteristics, and a transmitarray antenna (TA) featuring the high gain and low sidelobe level (SLL) is realized based on it. The TA is made up of a standard feed horn and a transmitarray aperture, each of which comprises a three-layer metasurface that is well-designed to tune the transmitted phase and amplitude on its own. As a result, the transmitarray aperture can cover the 360° phase range required for phase compensation while also realizing the amplitude distribution calculated by the Taylor design, contributing to the low SLLs. The advantage of independently controlling the amplitude and phase not only enables the proposed TA to be easy to realize and less cost on optimization but also improves the performance of high gain and low SLLs with a low profile and easy fabrication. Theoretical analyses and simulations are carried out, and a prototype is fabricated and measured. At 10 GHz, the measured peak gain is 21.16 dBi, with SLLs of −31.21 and −29.93 dB in the H- and E-planes, respectively. As a result, the tight agreements between measurement and simulation validate the design concept.
23 June 2021 in IEEE Transactions on Antennas and Propagation
In this article, an integrated low-profile low radar cross section (RCS) circularly polarized (CP) antenna array based on multifunctional modes generation method is proposed, which can realize good in-band radiation performance and wide out-of-band RCS reduction characteristics on the same layer without additional subassembly except for resistors. By embedding a resistor in the center of a metallic strip, the half and one and a half-wavelength resonant modes are changed into the absorption modes, while the one wavelength resonant mode is excited as the radiation mode when offset feeding at an appropriate location. Furthermore, the CP radiation performance is achieved with four bent and center-rotating-symmetric metallic strip and the sequentially rotated feeding network. The simulation results show that the designed integrated antenna array generates the same left-hand CP radiation performance as the array without embedding resistors, and the monostatic RCS of the array is significantly reduced in the lower and upper bands, with an average reduction value of 10 dB. Prototypes of the designed antenna array with $4 \times 4$ elements are fabricated and measured to validate the simulation results.