21 June 2024 in Archives of Metallurgy and Materials
In this study, the effect of heat treatment on the microstructure and mechanical properties of 2209 duplex stainless steel fabricated by wire arc additive was analyzed. It was found that solution treatment at 1100°C for 2 hours and tempering at 300°C for 2 hours can effectively improve the grain inhomogeneity of 2209 duplex stainless steel, eliminate γ2 and harmful brittle phases, and take into account the mechanical properties and corrosion resistance. Compared with the original deposition state, the hardness and yield strength increased by 10% and 31.8% to 245.6 HV and 499.7 MPa, which meet the requirements of engineering propellers. Electron back-scattered diffraction studies showed that the grains became refined and austenite maintained //Z orientation after solution heat treatment. Many small-angle grain boundaries were present in both the original sample and the solid solution, but further tempering transformed the small-angle grain boundaries into large-angle grain boundaries.
4 December 2023 in Archives of Thermodynamics
For the sake of exploring the thermodynamic characteristics of hybrid ceramic bearings with metal inner rings in the application process, we established the mathematical model of bearings with metal inner rings based on the thermodynamics of bearings. The heat of the bearings, inner and outer raceway, and the deformation of bearings were calculated by the thermodynamic model. We used the bearing life testing machine to test the bearing load and speed. The consequences indicate that the temperature stability time of a hybrid ceramic bearing with the metal inner ring is about 6 hours after loading, and its temperature is about 1–2°C higher than that of a metal bearing. Under the condition of a certain speed, the stable temperature of bearing operation improves with the enlargement of the load. Under the condition of a certain load, the bearing temperature also improves with the enlargement of bearing speed. The overall temperature trend of the bearing outer ring is unanimous with the overall temperature value calculated by the model. The maximum error is between 2.2 and 2.4°C. The thermodynamic analysis of hybrid bearings with metal inner rings is conducive to a better study of the effect of bearing material characteristics on bearing performance.