The discussion based on surfactant cleaning action is commonly used in chemistry classrooms for the comprehension of theoretical concepts related to surface tension and micelle formation. The experimental quantification of surface tension of aqueous solutions of surfactants provides the practical instruments for this discussion. The present paper describes a simplification on the common apparatus employed for the drop-weight method, making the determination of surface tension accessible to any chemistry lab. The surface tension of various liquids and the critical micelle concentration, CMC, of three commercial surfactants were measured with this modified method, and proved to be consistent with literature values
The high calorific value of rice husks has elevated its reuse as an energy source; however, the burning of these shells generates a waste ash from rice husk ash (RHA), which makes its disposal a concern. Despite advances, biodegradable polymers are not yet able to compete with those of traditional thermoplastics, which have lower production cost and higher performance. Based on this background, this paper studies the feasibility of reuse of RHA as filler in polymer matrices replacing the conventional filler. This study consists of applying different percentages of RHA in the formulation of polyhydroxybutyrate composite (PHB) and the use of talc (TA) for comparison purposes as conventional filler. The composites used in this assay were obtained by twin-screw extrusion and injection molding of the polymer plus the fillers under study. Physicochemical and biodegradability properties of the composites were evaluated. The composite PHB/RHA was superior in the biodegradability tests and the properties remain practically unchanged in the presence of the filler. Thus, composites with RHA are promising because they take an abundant residue combined with degradation capacity of the polymer, therefore reducing cost and the environmental impact
A inovação dos processos de beneficiamento de materiais têxteis é cada vez mais importante para possibilitar a redução no consumo de água e nos tempos de processo na indústria têxtil. O consumo de fibras têxteis no Brasil em 2014 foi de 13,3 kg por habitante, e para beneficiar estes tecidos são utilizados em média 80 litros de água para cada quilograma de substrato tratado. Este estudo visou aprimorar o processo de pré-alvejamento para tecidos têxteis utilizando o ozônio com o objetivo de reduzir o consumo de água, de aditivos químicos, de tempo e bem como de energia. O potencial de redução do ozônio (2,07 V) é maior que o potencial de redução do peróxido de hidrogênio (1,77 V), o que faz com que o ozônio seja um excelente agente oxidante. A avaliação dos resultados de resistência física (estouro e tração), propriedades tintoriais (K/S, FC % e DE) e do grau de branco do tecido, indicam que o processo de pré-alvejamento com ozônio a frio é promissor na indústria têxtil, pois além de eliminar a utilização de peróxido de hidrogênio e hidróxido de sódio, reduz o tempo de processo em 60% e diminui o consumo de água em 50%.
Natural dyes are compounds that occur naturally in several organisms and are classified based on chemical structure and application method. The literature cites several natural dyes used in industrial transformation processes. Annatto dye is used in the food industry, and its biological pigment is extracted from the annatto seed. However, this dye has shown a high number of potential applications in the textile industry. Annatto dye shows excellent stability and more attractive coloration in the textile process than other natural dyes described in the literature. In addition, the versatility of annatto dye makes its application possible in natural, artificial and synthetic fibres in both dyeing and printing processes. In this review, we provide an overview of the current situation with regard to the potential of annatto dye for the textile industry and its sustainable aspects. The classification, stability and applications in natural and synthetic fibres, as well as the effect of using mordants and process conditions in natural and synthetic fabrics dyeing, and the printing process using annatto dye, are reported, to explore a topic with potential for expansion and application in the textile industry. In addition, strategies to improve washing and light fastness are identified, along with a proposal for the molecular interactions occurring between textile fibres and annatto dye.