5 November 2018 in IEEE Sensors Journal
In this paper, a novel self-mixing interferometer is proposed with spectral analysis by multiple reflection technique. The relationship between the vibration amplitude, the dominant frequency and the reflection time is deduced, which indicates that the theoretical minimum measurable vibration amplitude is 0.21λ/G(N,θ) and the precision is about 0.08λ/G(N,θ). The displacement sensitivity gain G(N,θ) increases with the reflection time. Theoretical analysis results show that the proposed method for vibration measurement has the advantages of high precision and broad measurement range, especially for the measurement of amplitude much smaller than λ/2. The validity of the method is tested by several experiments with different amplitudes and reflection times. An amplitude of 75 nm has been proved to be measurable and the absolute error is 5.43 nm, which is within the theoretical error range. The proposed method plays an important role in high precision and nanoscale measurement.
17 July 2018 in IEEE Photonics Technology Letters
A dual-concentric-core photonic crystal fiber (DCPCF) with low Germanium doping is numerically investigated for dispersion compensation. The inner cladding is formed by a Fluorine-doped concentric ring which is used to increase the index slope difference between two supermodes and eliminate the sensitivity of dispersion characteristic to air holes in the inner cladding of traditional structures. The proposed DCPCF can compensate for the dispersion and dispersion slope of a standard single mode fiber (SMF) at 1550nm wavelength. The K value matches with that of SMF very well. Moreover, it can realize an effective compensated dispersion range of ±0.8 ps/nm/km from 1.458μm to 1.626μm wavelength which covers the S+C+L bands. The geometric parameters on dispersion characteristic are investigated. The sensitivity of the fiber dispersion and the effective compensated dispersion to ±2% and ±5% variation in the optimum parameters is studied for practical fabrication.
1 January 2011 in Chinese Optics Letters
A simple design procedure is used to generate photonic crystal fibers (PCFs) with ultra-flattened chromatic dispersion. Only four parameters are required, which not only considerably saves the computing time, but also distinctly reduces the air-hole quantity. The influence of the air-hole diameters of each ring of hexagonal PCFs (H-PCF, including 1-hole-missing and 7-hole-missing H-PCFs), circular PCFs (C-PCF), square PCFs (S-PCF), and octagonal PCFs (O-PCF) is investigated through simulations. Results show that regardless of the cross section structures of the PCFs, the 1st ring air-hole diameter has the greatest influence on the dispersion curve followed by that of the 2nd ring. The 3rd ring diameter only affects the dispersion curve within longer wavelengths, whereas the 4th and 5th rings have almost no influence on the dispersion curve. The hole-to-hole pitch between rings changes the dispersion curve as a whole. Based on the simulation results, a procedure is proposed to design PCFs with ultra-flattened dispersion. Through the adjustment of air-hole diameters of the inner three rings and hole-to-hole pitch, a flattened dispersion of 0+-0.5 ps/(nm.km) within a wavelength range of 1.239–2.083 \mum for 5-ring 1-hole-missing H-PCF, 1.248–1.992 \mum for 5-ring C-PCF, 1.237–2.21 \mum for 5-ring S-PCF, 1.149–1.926 \mum for 5-ring O-PCF, and 1.294–1.663 \mum for 7-hole-missing H-PCF is achieved.
25 June 2023 in Journal of Modern Optics
15 July 2025 in Journal of Microscopy
5 November 2026 in Journal of Biophotonics