Cong Xu

Dr. Cong Xu

orcid

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 April 2020 in Metals
Verified
Journal Article
Open access
PDF file
QLQianqian Li
Qianqian Li
MLMengjia Li
Mengjia Li
GLGuangxi Lu
Guangxi Lu
SGShaokang Guan
Shaokang Guan
EZEngui Zhang
Engui Zhang
Cong XuCong Xu
Cong Xu
The influence of alloying elements Er, Zr, Cu, Si and Zn on the crystallization temperature interval, microstructure, mechanical properties and corrosion behavior of Al-Mg-Mn alloy were studied by differential scanning calorimetry (DSC), electron backscatter diffraction (EBSD), X-ray diffraction (XRD), tensile testing, electrochemical measurements and nitric acid mass loss test (NAMLT). The results show that the crystallization temperature range of Al-Mg-Mn alloy with addition of Zn decreased 4.7 °C. Cold rolled alloys mainly contain S texture, Copper texture, Brass texture, and Goss texture; the content of the S texture is the highest. With the addition of trace elements, the second phase Al3Er, Al3Zr, Al2CuMg, Mg2Si and MgZn2 can be formed, which can improve the tensile strength and yield strength of Al-Mg-Mn alloy. The addition of the alloying element Zn can also improve the intergranular corrosion resistance of the Al-Mg-Mn alloy.

1 July 2021 in Materials Letters
Verified
Journal Article
Closed access
XYXufeng Yang
Xufeng Yang
Cong XuCong Xu
Cong Xu
RZRuixiao Zheng
Ruixiao Zheng
SGShaokang Guan
Shaokang Guan
CMChaoli Ma
Chaoli Ma

1 May 2016 in Materials Characterization
Verified
Journal Article
Closed access
LTLixi Tian
Lixi Tian
JCJing Chen
Jing Chen
Cong XuCong Xu
Cong Xu
CMChaoli Ma
Chaoli Ma

23 May 2025 in Metals
Verified
Journal Article
Open access
PDF file
LLLongfei Li
Longfei Li
XLXiao Long Li
Xiao Long Li
LSLei Shi
Lei Shi
SHShouzhi Huang
Shouzhi Huang
Cong XuCong Xu
Cong Xu
SGShaokang Guan
Shaokang Guan
As an eco-efficient short-process manufacturing technique for aluminum alloys, twin-belt continuous casting and direct rolling (TBCCR) demonstrates significant production advantages. In this study, an Al-Fe-Si alloy system with different Fe-rich intermetallics (α-AlFe(Mn)Si and β-AlFe(Mn)Si) via TBCCR was developed for new energy vehicle batteries, utilizing the Computer Coupling of Phase Diagrams and Thermochemistry (CALPHAD) technique. Comprehensive microstructure and surface segregation analyses of continuous casted ingots and direct-rolled sheets revealed that the Al-Fe-Si alloy with a combined Fe + Si content of 0.7% and an optimal Fe/Si atomic ratio of 3:1 (FS31) presents optimized mechanical properties: ultimate tensile strength of 145.8 MPa, elongation to failure of 5.7%, accompanied by a cupping value of 6.64 mm. Notably, Mn addition further refined the grain structure of casting ingots and enhanced the strength of both ingots and rolled sheets. Among the experimental alloys, FS14 (optimal Fe/Si atomic ratio of 1:4) sheets displayed the least surface segregation upon Mn incorporation. Through systematic optimization, an Al-Fe-Si-Mn alloy composition (Fe + Si = 0.7%, Fe/Si = 1:4 atomic ratio, 0.8 wt.% Mn) was engineered for TBCCR processing, achieving enhanced comprehensive performance: ultimate tensile strength of 189.4 MPa, elongation to failure of 7.32%, and cupping value of 7.71 mm. This composition achieves an optimal balance between grain refinement, mechanical properties (strength–plasticity synergy), formability (cupping value), and corrosion resistance (corrosion current density). The performance optimization strategy integrates synergistic improvements in strength, ductility, and corrosion resistance, providing valuable guidance for developing high-performance aluminum alloys suitable for the TBCCR process.

1 January 2011 in Chinese Optics Letters
Verified
Journal Article
Open access
HXHuizhen Xu
Huizhen Xu
Jian WuJian Wu
Jian Wu
YDYitang Dai
Yitang Dai
Cong XuCong Xu
Cong Xu
JLJintong Lin
Jintong Lin
A simple design procedure is used to generate photonic crystal fibers (PCFs) with ultra-flattened chromatic dispersion. Only four parameters are required, which not only considerably saves the computing time, but also distinctly reduces the air-hole quantity. The influence of the air-hole diameters of each ring of hexagonal PCFs (H-PCF, including 1-hole-missing and 7-hole-missing H-PCFs), circular PCFs (C-PCF), square PCFs (S-PCF), and octagonal PCFs (O-PCF) is investigated through simulations. Results show that regardless of the cross section structures of the PCFs, the 1st ring air-hole diameter has the greatest influence on the dispersion curve followed by that of the 2nd ring. The 3rd ring diameter only affects the dispersion curve within longer wavelengths, whereas the 4th and 5th rings have almost no influence on the dispersion curve. The hole-to-hole pitch between rings changes the dispersion curve as a whole. Based on the simulation results, a procedure is proposed to design PCFs with ultra-flattened dispersion. Through the adjustment of air-hole diameters of the inner three rings and hole-to-hole pitch, a flattened dispersion of 0+-0.5 ps/(nm.km) within a wavelength range of 1.239–2.083 \mum for 5-ring 1-hole-missing H-PCF, 1.248–1.992 \mum for 5-ring C-PCF, 1.237–2.21 \mum for 5-ring S-PCF, 1.149–1.926 \mum for 5-ring O-PCF, and 1.294–1.663 \mum for 7-hole-missing H-PCF is achieved.

18 December 2023 in Journal of Materials Engineering and Performance
Verified
Journal Article
Closed access
PDF file
GLGuangxi Lu
Guangxi Lu
Cong XuCong Xu
Cong Xu
XWXiucheng Wang
Xiucheng Wang
SGShaokang Guan
Shaokang Guan