27 April 2018 in IEEE Transactions on Nuclear Science
The present article is an overview of developments and results regarding neutron noise measurements in current mode at the CROCUS zero power facility. Neutron noise measurements offer a non-invasive method to determine kinetic reactor parameters such as the prompt decay constant at criticality α = βeff/Λ, the effective delayed neutron fraction βeff, and the mean generation time Λ for nuclear databases and code validation efforts. A newly developed current mode detection system using two fission chambers in the core reflector was used to accurately measure the kinetic parameters of CROCUS. Characteristics of the system and the performed noise measurements are presented. We implemented noise postprocessing of the current signals acquired at 900 mW using the APSD/CPSD method. The final CPSD estimated values were found to be α = (153.3 ± 8.6) s-1, βeff = (778 ± 14) pcm, and Λ = (50.7 ± 2.9) μs. In order to comply with experimental uncertainty targets (<3%), the measurement time was 6 hours. In comparison to code predictions using MCNP5-v1.6 employing the JEFF 3.1 and ENDF/B-7.1 cross section libraries, we found differences up to 3%, confirming the need for accurate kinetic parameter measurements. In the future the new measurement system will also be used for studies of spatial and external reactor noise.
2 March 2020 in IEEE Transactions on Nuclear Science
8 December 2016 in IEEE Transactions on Nuclear Science
In the framework of an international collaboration, teams of the PSI and CEA research institutes measure the critical decay constant (α0 = β/A), delayed neutron fraction (β) and generation time (A) of the Minerve reactor using the Feynman-α, Power Spectral Density and Rossi-α neutron noise measurement techniques. These measurements contribute to the experimental database of kinetic parameters used to improve nuclear data files and validate modern methods in Monte Carlo codes. Minerve is a zero-power pool reactor composed of a central experimental test lattice surrounded by a large aluminum buffer and four high-enriched driver regions. Measurements are performed in three slightly subcritical configurations (-2 cents to -30 cents) using two high-efficiency 235U fission chambers in the driver regions. Measurement of α0 and β obtained by the two institutes and with the different techniques are consistent for the configurations envisaged. Slight increases of the β values are observed with the subcriticality level. Best estimate values are obtained with the Cross-Power Spectral Density technique at -2 cents, and are worth: β = 716.9±9.0 pcm, α0 = 79.0±0.6 s-1 and A = 90.7±1.4 μs. The kinetic parameters are predicted with MCNP5-v1.6 and TRIPOLI4.9 and the JEFF-3.1/3.1.1 and ENDF/B-VII.1 nuclear data libraries. The predictions for β and α0 overestimate the experimental results by 3-5% and 10-12%, respectively; that for A underestimate the experimental result by 6-7%. The discrepancies are suspected to come from the driven system nature of Minerve and the location of the detectors in the driver regions, which prevent accounting for the full reactor.
26 August 2021 in Nuclear Technology
Best estimate plus uncertainty for the safety assessment of nuclear power plant transient requires, among others, estimating the probability density function (PDF) of physical model parameters in thermal-hydraulic system codes. In that context, Bayesian calibration based on experimental data from separate-effect test facilities are increasingly popular to inform the PDF of a single thermal-hydraulic phenomenon. These calibrations are, however, time intensive, especially when considering multiple time-dependent outputs. Calibrating on many tests with different boundary conditions and potentially different phenomena to derive PDFs applicable to complex transients appears intractable, even using hierarchical modeling. In this paper, we start investigating this problem by considering a set of Flooding Experiments with Blocked Arrays reflood tests with different boundary conditions. We use TRACE v5.0p3 to model time- and space-dependent temperature profiles, pressure drops, and liquid carry-over. Global sensitivity analysis helps screen out noninfluential parameters and gain a detailed understanding of the modeled physics of reflood. The analysis shows that, for all tests, the outputs were sensitive to a similar set of influential model parameters. In turn, Bayesian calibration yields similar posterior PDFs for the influential parameters, and forward propagation of these posterior PDFs yields similar confidence intervals. As such, the information of the investigated tests can well be represented by a unique posterior PDF. Such simplifications, although not general, are welcome to help manage the intensive calibration effort necessary for dealing with complex thermal-hydraulic transients encountered in nuclear power plants.
10 January 2018 in EPJ Web of Conferences
The present article is an overview of developments and results regarding neutron noise measurements in current mode at the CROCUS zero power facility. Neutron noise measurements offer a non-invasive method to determine kinetic reactor parameters such as the prompt decay constant at criticality α = βeff / λ, the effective delayed neutron fraction βeff, and the mean generation time λ for code validation efforts. At higher detection rates, i.e. above 2×104 cps in the used configuration at 0.1 W, the previously employed pulse charge amplification electronics with BF3 detectors yielded erroneous results due to dead time effects. Future experimental needs call for higher sensitivity in detectors, higher detection rates or higher reactor powers, and thus a generally more versatile measurement system. We, therefore, explored detectors operated with current mode acquisition electronics to accommodate the need. We approached the matter in two ways: 1) By using the two compensated 10B-coated ionization chambers available in CROCUS as operational monitors. The compensated current signal of these chambers was extracted from coremonitoring output channels. 2) By developing a new current mode amplification station to be used with other available detectors in core. Characteristics and first noise measurements of the new current system are presented. We implemented post-processing of the current signals from 1)and 2) with the APSD/CPSD method to determine α. At two critical states (0.5 and 1.5 W), using the 10B ionization chambers and their CPSD estimate, the prompt decay constant was measured after 1.5 hours to be α=(156.9 ± 4.3) s-1 (1σ). This result is within 1σ of statistical uncertainties of previous experiments and MCNPv5-1.6 predictions using the ENDF/B-7.1 library. The newsystem connected to a CFUL01 fission chamber using the APSDestimate at 100 mW after 33 min yielded α = (160.8 ± 6.3) s-1, also within 1σ agreement. The improvements to previous neutron noise measurementsinclude shorter measurement durations that can achievecomparable statistical uncertainties and measurements at higherdetection rates.
1 November 2016 in Annals of Nuclear Energy