26 June 2019 in IEEE Transactions on Circuits and Systems I: Regular Papers
This paper proposes an implementation-friendly maximum-minimum-eigenvalue (MME)-based spectrum sensing algorithm for cognitive radio network. An iterative power method has been applied for the first time to compute maximum and minimum eigenvalues that reduces the computational complexity of this MME algorithm. We suggest new digital architecture of MME-based spectrum sensor with shorter critical-path delay that lowers its sensing time. This spectrum-sensor architecture has been resource shared to further enhance the hardware efficiency. Performance analysis of the suggested MME algorithm with 1024 input-signal samples delivers adequate performance at -10 dB of SNR with the detection probability of 0.8. Suggested MME algorithm performs better than the energy detection-based spectrum sensing under noise uncertainty. It has detection gain of 5.3 dB compared to the cyclostationary feature detection-based spectrum sensing algorithm at 0.7 detection probability. Hardware prototyping of our MME spectrum sensor has been carried out in FPGA platform and its real-time testing is performed using the communication environment of DVB-T standard. We synthesized and post-layout simulated proposed digital sensor in 90 nm-CMOS process that resulted in 0.42 mm² of area, operating at a maximum clock frequency of 404 MHz which results in the sensing time of 53.5 μs. Comparison of our work with literature shows that the suggested MME spectrum-sensor has 2.5x shorter sensing time and lowest area-time-product of 0.023, indicating better hardware-efficiency, than the state-of-the-art implementations.
28 October 2019 in IEEE Transactions on Circuits and Systems I: Regular Papers
This paper presents implementation friendly VLSI-algorithms for maximum-eigenvalue-detection (MED), energy with minimum-eigenvalue (EME), and mean-to-square extreme-eigenvalue (MSEE) based blind spectrum sensing algorithms. We propose to use efficient iterative power-method for computing maximum and minimum eigenvalues for these algorithms that complemented our hardware design. New VLSI architectures based on suggested spectrum sensing algorithms have been presented in this work. We present two types of sensor architectures: (1) memory-less & low-latency (2) memory-based & resource-shared spectrum-sensor architectures. Former type targets to achieve lower sensing time with adequate hardware efficiency and the later ones are highly resource shared to consume lesser hardware with moderate sensing time. Performance analyses of suggested MED, MSEE and EME spectrum sensing algorithms in AWGN environment showed that the detection probability of 0.75 could be achieved at the SNRs of -12 dB, -10 dB and -7 dB respectively. On synthesizing and post-layout simulating our sensor architectures in 90 nm-CMOS process with the supply of 1.2 V, they could operate at the maximum clock frequency up to 408 MHz delivering sensing time in the range of 23-44 μs. The proposed spectrum sensors have achieved 5.5x and 19x better sensing time and hardware efficiency, respectively, compared to the state-of-the-art implementations. Eventually, the memory-based spectrum sensors are FPGA prototyped and tested, at 100 MHz clock frequency, in DVB-T signal environment with OFDM modulated transmitted signals in 2K size IFFT-mode.
18 February 2021 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
This article presents a hardware-friendly algorithm and architecture for cooperative spectrum sensing (CSS) in the data-fusion-based cognitive-radio (CR) network. The proposed VLSI-algorithm is based on the iterative power method and deflation technique that alleviate the computational complexity of conventional CSS algorithm with minimal performance degradation. In this work, a new hardware-efficient VLSI architecture of cooperative spectrum sensor (CSR) for the data-fusion center is presented, which supports up to six secondary users in the cooperative CR network. Its performance analysis under fading channel environment has been carried out where it delivers 0.8 detection probability (Pd) at -8 dB of channel SNR with a false alarm rate of 0.1. It shows the minimum performance degradation of 0.057 dB at Pd = 0.88 compared to the conventional algorithm. The suggested CSR architecture has been application-specific integrated circuit (ASIC)-synthesized and postlayout simulated in UMC 90 nm-CMOS process. Thus, it occupies 2.4 mm² of the core area, consumes 36 mW of total power, and delivers a low sensing time of 60.41 μs while operating at a maximum clock frequency of 87.7 MHz. Comparison with the reported works indicates that the proposed design requires 40.3% lesser area, and it is 41% hardware efficient than the conventional implementation. Eventually, this design has been field-programmable gate array (FPGA) prototyped, and its functionality is verified in the real-world test environment.
14 April 2022 in IEEE Transactions on Consumer Electronics
This paper presents hardware-friendly algorithm for Gini-index (GI) cooperative-spectrum-sensing (CSS) algorithm for the data-fusion based cooperative cognitive-radio network. It simplifies the complex computations of sample-covariance-matrix (SCM) elements and test-statistics value of the conventional GI-based CSS algorithm. It delivers excellent detection performance under the realistic scenario of non-uniform dynamical noise and signal-power. Based on GI-based CSS algorithm, three different VLSI architectures are proposed for the cooperative spectrum sensor (CSR): CSR-VLAR1, CSR-VLAR2, and CSR-VLAR3. Here, CSR-VLAR1 is the first-time reported CSR-architecture for the conventional GI-based CSS algorithm. Subsequently, CSR-VLAR2 represents hardware-architecture of the proposed hardware-friendly GI-based CSS algorithm. Eventually, additional architectural optimization has been applied to CSR-VLAR2 that is transformed into the most hardware-efficient VLSI-architecture of CSR, referred as CSR-VLAR3, which is ASIC chip-fabricated in UMC 130 nm-CMOS technology node. Furthermore, both CSR-VLAR1 and CSR-VLAR2 are synthesized and post-layout simulated in the same technology node. Our ASIC-chip of CSR-VLAR3 occupies 0.35 mm 2 of core-area and consumes 8.31 mW of total power at 88.8 MHz of maximum clock frequency, when the supply voltage is 1.2 V. Our CSR ASIC-chip has been functionally verified with the aid of real-world signals, using USRPs and FPGAs based test-setup of cooperative cognitive-radio network. Measured results of our design are compared with reported implementations where the proposed CSR is $4.52\times $ hardware-efficient and $2.8\times $ power-efficient than the state-of-the-art CSR-implementations. Thus, our work addresses the key challenge of designing hardware-efficient CSR that delivers excellent detection performance in the real-world scenario.
5 October 2021 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
This article proposes implementation-friendly Gerschgorin radii and center ratio (GRCR)-based cooperative spectrum sensing (CSS) algorithm with reduced computational complexity that delivers adequate performance in uniform- and nonuniform-dynamical noise-and-received signal power scenarios. Subsequently, a new VLSI architecture of cooperative spectrum sensor (CSR) based on the proposed GRCR algorithm and additional architectural optimization has been suggested that consumes lower area and delivers shorter sensing time. Performance analysis of our implementation-friendly GRCR-based CSS algorithm has been carried out under the Rayleigh fading channel, and it delivers adequate area under the receiver-operating-characteristic (ROC) curve (AUC) = 0.9 at an average signal-to-noise ratio (SNR avg ) of −5 dB. Consecutively, an application-specific integrated circuit (ASIC) chip of the proposed CSR has been fabricated in the UMC 130-nm CMOS process. It occupies 0.27 mm 2 of the core area, and its maximum operating frequency is 88.8 MHz at 1.2 V of the supply voltage. At this clock frequency, our CSR delivers a sensing time of $5~\mu \text{s}$ while processing the received signal samples from four secondary users in a cognitive-radio network. These ASIC-implementation results are compared with the reported works in the literature where our design has shown $45\times $ and $12\times $ better hardware efficiency and sensing time, respectively, compared to the state-of-the-art implementations.
18 March 2025 in IEEE Transactions on Green Communications and Networking
Recognising the limitations of existing channel-estimation schemes for energy beamforming, this paper proposes an energy-preserving, indirect-feedback based approach to determine the optimal energy beamforming vector, specially designed for battery-free RF energy harvesting devices. Upon elaborating on the key ideas behind the proposed approach—dynamics of the harvest-then-transmit protocol, non-linearity of harvesting efficiency and the latency associated with the charging process—we present an algorithm and its hardware architecture to concretise the proposed approach. The developed algorithm is supplemented by mathematical analysis and numerical simulations. Furthermore, the designed hardware architecture has been post-route implemented on an FPGA platform, and ASIC post-layout simulated in 90 nm-CMOS technology node. For the configuration in the numerical results section, a low-power sensor node operating at the milliwatt level can save approximately 1 mJ of energy by adopting the proposed scheme, enabling the transmission of 5 additional packets1.Moreover, the saved energy—and consequently, the number of additional packets—scales linearly with the number of transmit antennas.