2 June 2015 in Nonlinear Dynamics
Many modern applications of the flexible multibody systems require formulations that can effectively solve problems that include large displacements and deformations having the ability to model nonlinear materials. One method that allows dealing with such systems is continuum-based absolute nodal coordinate formulation (ANCF). The objective of this study is to formulate an efficient method of modeling nonlinear nearly incompressible materials with polynomial Mooney–Rivlin models and volumetric energy penalty function in the framework of the ANCF. The main part of this paper is dedicated to the examination of several ANCF fully parameterized beam elements under incompressible regime. Moreover, two volumetric suppression methods, originating in the finite element analysis, are proposed: a well-known selective reduced integration and F-bar projection. It is also presented that the use of these methods is crucial for performing reliable analysis of models with bending-dominated loads when lower-order elements are employed. The results of the simulations carried on with considered elements and proposed methods are compared with the results obtained from commercial finite element package and existing ANCF implementation. The results show important improvement as compared with previous applications and good agreement with reference results.
24 November 2020 in IEEE Access
Fully autonomous earth-moving heavy equipment able to operate without human intervention can be seen as the primary goal of automated earth construction. To achieve this objective requires that the machines have the ability to adapt autonomously to complex and changing environments. Recent developments in automation have focused on the application of different machine learning approaches, of which the use of reinforcement learning algorithms is considered the most promising. The key advantage of reinforcement learning is the ability of the system to learn, adapt and work independently in a dynamic environment. This paper investigates an application of reinforcement learning algorithm for heavy mining machinery automation. To this end, the training associated with reinforcement learning is done using the multibody approach. The procedure used combines a multibody approach and proximal policy optimization with a covariance matrix adaptation learning algorithm to simulate an autonomous excavator. The multibody model includes a representation of the hydraulic system, multiple sensors observing the state of the excavator and deformable ground. The task of loading a hopper with soil taken from a chosen point on the ground is simulated. The excavator is trained to load the hopper effectively within a given time while avoiding collisions with the ground and the hopper. The proposed system demonstrates the desired behavior after short training times.
14 December 2020 in Multibody System Dynamics
1 October 2012 in Archive of Mechanical Engineering
The beam elements, which are widely used in the absolute nodal coordinate formulation (ANCF) can be treated as isoparametric elements, and by analogy to the classical finite element analysis (FEA) are integrated with standard, spatial Gauss- Legendre quadratures. For this reason, the shape of the ANCF beam cross section is restricted only to the shape of rectangle. In this paper, a distinct method of integration of ANCF elements based on continuum mechanics approach is presented. This method allows for efficient analysis of the ANCF beam elements with circular cross section. The integration of element vectors and matrices is performed by separation of the quadrature into the part that integrate along beam axis and the part that integrate in the beam cross section. Then, an alternative quadrature is used to integrate in the circular shape of the cross section. Since the number of integration points in the alternative quadrature corresponds to the number of points in the standard Gaussian quadrature the change in the shape of the cross section does not affects negatively the element efficiency. The presented method was verified using selected numerical tests. They show good relatively agreement with the reference results. Apart from the analysis of the beams with the circular cross section, a possibility of further modifications in the methods of the element integration is also discussed. Due to the fact that locking influence on the convergence of the element is also observed, the methods of locking elimination in the proposed elements are also considered in the paper.
30 January 2017 in Nonlinear Dynamics
Modeling and analysis of complex dynamical systems can be effectively performed using multibody system (MBS) simulation software. Many modern MBS packages are able to efficiently and reliably handle rigid and flexible bodies, often offering a wide choice of different formulations. Despite many advances in modeling of flexible systems, the most widely used formulation remains the well-established floating frame of reference formulation (FFRF). Although FFRF usually allows inclusion of only small elastic deformations, this assumption is adequate for many industrial applications. In addition, FFRF is computationally efficient if implemented with appropriate model order reduction techniques and effective handling of system inertia terms by utilization of so-called inertia shape integrals. However, derivation of the system of equations of motion for FFRF bodies is a complex and often error-prone task. The main goal of this paper is to provide a reliable, detailed, universal and clear set of inertia terms within the FFRF. The paper concentrates on detailed derivation of the inertia forces with focus on accurate determination and exploitation of the inertia shape integrals. Two standard methods are employed, namely the Lagrangian and Virtual Work approaches. Additionally, the introduced derivations are executed without selection of specific rotational parameters. Direct application of Euler parameters and Euler angles is presented. It is found that the derived expressions are well suited for direct implementation and simplify derivation of force components.
24 November 2023 in Mechanism and Machine Theory