Ding Zhao

Ding Zhao

Auto-generated profile, based on publicly available information

Ding Zhao

Key Laboratory of High Power Microwave Sources and Technologies, Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing, China

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 July 2020 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
DZDing Zhao
Ding Zhao
WGWei Gu
Wei Gu
XHXiaowan Hou
Xiaowan Hou
GLGaofeng Liu
Gaofeng Liu
QXQianzhong Xue
Qianzhong Xue
ZZZhiqiang Zhang
Zhiqiang Zhang
The Ka-band extended interaction klystrons (EIK) have been developed at the Institute of Electronics, Chinese Academy of Sciences (IECAS), to satisfy the requirement for the high-power millimeter-wave sources in scientific researches. In this work, two kinds of high compression electron gun with the solid or hollow beams, the derivative electron optics systems using the compact permanent magnet uniform focusing and the shared efficient interaction circuit based on the multigap ladder cavity, have been studied in detail and well designed through a mass of calculations. After the mechanical design, finely manufacturing, and a series of technical processes, the Ka-band EIK prototype tubes have been successfully built and tested. For the solid beam scheme, the maximum output power achieves 20 kW in the bandwidth of 60 MHz, and, correspondingly, the gain of 53 dB and the efficiency of 24% are observed. The measured -1 and -3 dB bandwidths are about 220 and 350 MHz, respectively. Meanwhile, the beam transmission is excellent, that is over 97% in dc state and over 90% in RF operation. For the hollow beam case, an over 91% dc transmission test has finished.

1 October 2021 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
NGNaining Guo
Naining Guo
QXQianzhong Xue
Qianzhong Xue
ZQZhaowei Qu
Zhaowei Qu
KLKegang Liu
Kegang Liu
WSWenke Song
Wenke Song
HDHaibing Ding
Haibing Ding
A narrow coupling ladder-type extended interaction klystron (EIK) operating at 0.34 THz is proposed and analyzed. Compared with the traditional THz EIKs, the narrow coupling EIK can offer higher power capability and increased efficiency because such arrangement has higher characteristic impedance and a more uniform electric field in the beam tunnel. This article studies the electric field distribution of the narrow coupling circuits and traditional circuits. Moreover, the coefficient of variation is introduced to quantify the uniformity of the axial electric field in the beam tunnel. The operating stability is also ensured by adjusting the period length and number of cells. The 3-D particle-in-cell (PIC) simulation predicts the ideal EIK, driven by a 0.15-A, 17.5-kV electron beam confined in a 0.22-mm diameter beam tunnel, and generates an output power of 41 W. The corresponding gain, electronic efficiency, and 3-dB bandwidth are 28.03 dB, 1.56%, and 600 MHz, respectively. Finally, in order to verify the feasibility of the designed structure, we perform a sensitivity study on the EIK design for an eight-micron fabrication tolerance assuming normal distributions for all critical dimensions per each cell with PIC simulations.

14 February 2022 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
NGNaining Guo
Naining Guo
ZQZhaowei Qu
Zhaowei Qu
QXQianzhong Xue
Qianzhong Xue
KLKegang Liu
Kegang Liu
WSWenke Song
Wenke Song
Jinjun FengJinjun Feng
Jinjun Feng
The design approaches of the overlapping-mode extended interaction klystrons (EIKs) are presented to satisfy the requirement for broadband terahertz power amplifiers. Since all the cavities are designed and tuned to operate in multiple-cavity modes, the overlapping-mode EIKs can provide high output power over a wider frequency band. The circuit characteristics of the overlapping-mode EIKs are studied, including the dispersion curve, the coupling coefficient, and the frequency interval between cavity modes. Moreover, a six-cavity EIK operating at 0.34 THz is designed to demonstrate the broadband output capability of the overlapping-mode EIKs. The $2\pi $ -mode and its adjacent axial mode, the $\pi $ /13-mode, are chosen as the operating modes of the designed EIK. The 3-D particle-in-cell (PIC) simulation predicts a 3-dB bandwidth of 2.9 GHz for the designed power amplifier at a small-signal level or in saturation. Driven by an input power of 10 mW, the amplifier can provide the output power of 3.9 W, and the corresponding gain is 25.9 dB. When the input power is 150 mW, the amplifier is partially saturated and can provide the output power of 33 W with a corresponding electronic efficiency of 1.23%.

13 May 2021 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
KLKegang Liu
Kegang Liu
QXQianzhong Xue
Qianzhong Xue
DZDing Zhao
Ding Zhao
Jinjun FengJinjun Feng
Jinjun Feng
In this work, exploitation of artificial intelligence algorithms for the design of forward-wave amplifier is proposed and discussed. The multilayer perceptron (MLP), a quintessential example of deep learning, is employed to get the cost function, i.e., the relationship between the geometrical parameter set and dispersion characterization from only a small proportion of the parameter sets. Due to the structural complexity, there did not exist a closed-form solution and the neural network shows its superiority compared to the time-consuming numerical calculation. Subsequently, the genetic algorithm (GA) is used to find the parameter sets best matching the goals that broadband beam-wave interaction at specific voltages and even specific phases or frequencies, from the huge 4-D parameter-set space. The intuitive goals can be easily accessible, as long as the goals are within the ability of the parameter-set space and converting the goals into the goal functions for GA with some attempts and adjustments. As a practical example, the recently proposed defect photonic crystal waveguide is utilized to demonstrate the design pattern. Through almost full-automatic design with little judgment and analysis, a response of 14-GHz 3-dB bandwidth and 25-dB gain at the 168.5-GHz central frequency has been realized, indicating the effectiveness of the design pattern. This design pattern will ease researchers from numerous simulation work and help to get deeper insight of the structure.

21 August 2023 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
ZQZhaowei Qu
Zhaowei Qu
ZZZhiqiang Zhang
Zhiqiang Zhang
NGNaining Guo
Naining Guo
CJChanghong Jiang
Changhong Jiang
SWShuzhong Wang
Shuzhong Wang
YDYaogen Ding
Yaogen Ding
In order to meet the high-power source requirement of compact submillimeter-wave systems, a high-power G-band extended interaction klystron (EIK) has been developed at the Aerospace Information Research Institute, Chinese Academy of Sciences (AIRCAS), and reported for the first time. The extended interaction circuit design based on over-synchronous voltage and high quality factor is proposed to enhance the output power and gain. In this manner, the designed EIK has achieved excellent test results compared with the same type of compact devices. Driven by a 20.3 kV, 198 mA pencil electron beam, the EIK can deliver a pulsed output power greater than 120 watts at around 0.22 THz, corresponding to a gain of 32 dB with a 5% duty cycle, and the average power and -1 dB bandwidth are 6 watts and 180 MHz respectively. Constrained by an axial magnetic field of about 1.03 T, the beam transmission is around 92% in RF operation.

31 August 2022 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
NGNaining Guo
Naining Guo
ZQZhaowei Qu
Zhaowei Qu
XSXinwen Shang
Xinwen Shang
HDHaibing Ding
Haibing Ding
KLKegang Liu
Kegang Liu
QXQianzhong Xue
Qianzhong Xue
This article describes and evaluates the effect of random geometrical perturbations on resonance characteristics and output performance of extended interaction klystrons (EIKs). The perturbations, assuming a normal distribution, will result in random variation in resonance characteristics, including resonant frequency shift, quality factor shift, and field distortion. The results are demonstrated in a 220-GHz extended interaction cavity by combining theory, simulations, and experimental measurements. In addition, 3-D particle-in-cell (PIC) simulation and small-signal theory are employed to gain insights into the output performance instabilities caused by variation in the resonance characteristics. The comprehension of the factors that contribute to performance instability is fundamental to avoid excess costs in the fabrication process. Aided by the small-signal theory code with a calculation speed that is several orders faster than PIC simulation, we address the instability by applying cathode voltage adjustment technology, frequency tuning technology, and multiparameter optimization based on a genetic algorithm. Such analysis and improvement patterns are general for the EIKs operating in the terahertz regime.