3 September 2018 in Advanced Optical Materials
23 April 2013 in Discover Nano
Large-area vertical rutile TiO2 nanorod arrays (TNAs) were grown on F/SnO2 conductive glass using a hydrothermal method at low temperature. A self-powered ultraviolet (UV) photodetector based on TiO2 nanorod/water solid–liquid heterojunction is designed and fabricated. These nanorods offer an enlarged TiO2/water contact area and a direct pathway for electron transport simultaneously. By connecting this UV photodetector to an ammeter, the intensity of UV light can be quantified using the output short-circuit photocurrent without a power source. A photosensitivity of 0.025 A/W and a quick response time were observed. At the same time, a high photosensitivity in a wide range of wavelength was also demonstrated. This TNA/water UV detector can be a particularly suitable candidate for practical applications for its high photosensitivity, fast response, excellent spectral selectivity, uncomplicated low-cost fabrication process, and environment-friendly feature.
22 September 2016 in Discover Nano
In recent years, there is an urgent demand for high-performance ultraviolet photodetectors with high photosensitivity, fast responsivity, and excellent spectral selectivity. In this letter, we report a self-powered photoelectrochemical cell-type UV detector using the ZnO/ZnS core-shell nanorod array as the active photoanode and deionized water as the electrolyte. This photodetector demonstrates an excellent spectral selectivity and a rapid photoresponse time of about 0.04 s. And the maximum responsivity is more than 0.056 (A/W) at 340 nm, which shows an improvement of 180 % compared to detectors based on the bare ZnO nanorods. This improved photoresponsivity can be understood from the step-like band energy alignment of the ZnO/ZnS interface, which will accelerate the separation of photoexcited electron-hole pairs and improve the efficiency of the photodetector. Considering its uncomplicated low-cost fabrication process, and environment-friendly feature, this self-powered device is a promising candidate for UV detector application.
8 October 2013 in Discover Nano
ZnO nanoneedle arrays were grown vertically on a fluorine-doped tin oxide-coated glass by hydrothermal method at a relatively low temperature. A self-powered photoelectrochemical cell-type UV detector was fabricated using the ZnO nanoneedles as the active photoanode and H2O as the electrolyte. This solid-liquid heterojunction offers an enlarged ZnO/water contact area and a direct pathway for electron transport simultaneously. By connecting this UV photodetector to an ammeter, the intensity of UV light can be quantified using the output short-circuit photocurrent without a power source. High photosensitivity, excellent spectral selectivity, and fast photoresponse at zero bias are observed in this UV detector. The self-powered behavior can be well explained by the formation of a space charge layer near the interface of the solid-liquid heterojunction, which results in a built-in potential and makes the solid-liquid heterojunction work in photovoltaic mode.
30 June 2014 in Nanoscale
Self-powered UV photodetectors based on TiO2 and ZnO nanorod arrays have attracted lots of attention in recent years due to their various advantages. Impressive performances were observed in photochemical cell based UV detectors. However, liquid electrolytes are not ideal for long-term operation and are inconvenient for practical applications. Hence there is an urgent demand for replacing liquid electrolytes with solid-state hole transfer materials. Herein we report a nanostructured quasi-solid-state UV photodetector fabricated using a liquid crystal (LC)-embedded electrolyte with a light-trapping scheme. Vertical rutile TiO2 nanorod arrays grown on fluorine-doped tin oxide conductive glass were used as the active photoanode. A high incident photon-to-current conversion efficiency of 29% at 383 nm and a quick response time of less than 0.03 s were observed. In addition, it was revealed that the quasi-solid-state UV photodetector showed visible-blind, high responsivity, fast time response and good photosensitivity linearity in a wide light intensity range. The LC-embedded electrolyte with a light-trapping scheme enhanced the light absorption and thus improved the photodetecting performance. This self-powered device is a promising candidate for application in high-sensitivity and high-speed UV light photodetectors.
3 April 2018 in Discover Nano
Photoelectrochemical cell-typed self-powered UV detectors have attracted intensive research interest due to their low cost, simple fabrication process, and fast response. In this paper, SnO2-TiO2 nanomace arrays composed of SnO2 nanotube trunk and TiO2 nanobranches were prepared using soft chemical methods, and an environment-friendly self-powered UV photodetector using this nanostructure as the photoanode was assembled. Due to the synergistic effect of greatly accelerated electron-hole separation, enhanced surface area, and reduced charge recombination provided by SnO2-TiO2 nanomace array, the nanostructured detector displays an excellent performance over that based on bare SnO2 arrays. The impact of the growing time of TiO2 branches on the performance of UV photodetector was systematically studied. The device based on optimized SnO2-TiO2 nanomace arrays exhibits a high responsivity of 0.145 A/W at 365 nm, a fast rising time of 0.037 s, and a decay time of 0.015 s, as well as excellent spectral selectivity. This self-powered photodetector is a promising candidate for high-sensitivity, high-speed UV-detecting application.