Photoelectrochemical cell-typed self-powered UV detectors have attracted intensive research interest due to their low cost, simple fabrication process, and fast response. In this paper, SnO2-TiO2 nanomace arrays composed of SnO2 nanotube trunk and TiO2 nanobranches were prepared using soft chemical methods, and an environment-friendly self-powered UV photodetector using this nanostructure as the photoanode was assembled. Due to the synergistic effect of greatly accelerated electron-hole separation, enhanced surface area, and reduced charge recombination provided by SnO2-TiO2 nanomace array, the nanostructured detector displays an excellent performance over that based on bare SnO2 arrays. The impact of the growing time of TiO2 branches on the performance of UV photodetector was systematically studied. The device based on optimized SnO2-TiO2 nanomace arrays exhibits a high responsivity of 0.145 A/W at 365 nm, a fast rising time of 0.037 s, and a decay time of 0.015 s, as well as excellent spectral selectivity. This self-powered photodetector is a promising candidate for high-sensitivity, high-speed UV-detecting application.
Cellulose paper has been functionalized by nanoparticles such as Ag nanoparticles, TiO2, and BaTiO3 for versatile applications including supercapacitor, sensors, photoactivity, and packaging. Herein, zinc oxide (ZnO) nanosheet-modified paper (ZnO@paper) with excellent antibacterial properties was fabricated via a mild ZnCl2-urea eutectic solvent. In this proposed method, cellulose fibers as the raw material for ZnO@paper were treated by an aqueous solvent of ZnCl2-urea; the crystalline region was destroyed and [ZnCl]+-based cations were adsorbed on the surface of cellulose fibers, facilitating more ZnO growth on ZnO@paper. A flexible paper-based triboelectric nanogenerator (P-TENG) was made of ZnO@paper paired with a PTFE film. The P-TENG presents high triboelectric output performance and antibacterial activity. For instance, the output voltage and current of the P-TENG were 77 V and 0.17 μA, respectively. ZnO@paper showed excellent antibacterial activity against E. coli and S. aureus, suggesting that a P-TENG can restrain and kill the bacteria during the working process. The results also indicated that ZnO could improve the surface roughness of cellulose paper, enhancing the output performance of a flexible P-TENG. In addition, the potential application of a P-TENG-based pressure sensor for determining human motion information was also reported. This study not only produced a high-performance P-TENG for fabricating green and sustainable electronics, but also provides an effective and novel method for ZnO@paper preparation.
LncRNAs have been proved to be involved in the promotion of glioma cell malignant development. However, the exact roles and molecular mechanisms of linc01023 in glioma remain blurred. In this study, we confirm linc01023 is up-regulated in glioma tissues and cell lines. In addition, elevated linc01023 expression indicates shorter survival times in patients with glioma. Moreover, loss-of-function studies reveal that restoration of linc01023 restrains glioma cell proliferation, migration and invasion by regulating IGF1R/AKT pathway in vitro and in vivo. Collectively, the study indicates that linc01023 plays an oncogenic role in glioma through activation of IGF1R/AKT signal pathway, and it could be a candidate therapeutic target.
Hybrid organic-inorganic perovskite shows a great potential in the field of photoelectrics. Embedding methyl ammonium lead bromide (MAPbBr3) in a mesoporous silica (mSiO2) layer is an effective method for maintaining optical performance of MAPbBr3 at room temperature. In this work, we synthesized MAPbBr3 quantum dots, embedding them in the mSiO2 layer. The nonlinear optical responses of this composite thin film have been investigated by using the Z-scan technique at a wavelength of 800 nm. The results show plural nonlinear responses in different intensities, corresponding to one- and two-photon processing. Our results support that composites possess saturation intensity of ~27.29 GW/cm2 and varying nonlinear coefficients. The composite thin films show high stability under ultrafast laser irradiating. By employing the composite as a saturable absorber, a passively Q-switching laser has been achieved on a Nd:YVO4 all-solid-state laser platform to generate a laser at ~1 μm.
In this work we present a high-sensitivity fiber optic temperature sensor based on the enhanced Vernier effect. The sensor consists of a cascade of three Fabry-Perot interferometers (FPIs), where FPI 1 contains a polydimethylsiloxane (PDMS) cavity, FPI 2 an air micro-cavity, and FPI 3 a PDMS-air hybrid cavity. Since the effective lengths of the PDMS cavity and the PDMS-air hybrid cavity are close to each other, the superposition of the reflection spectra of FPI 1 and FPI 3 produces the traditional vernier effect. Due to the thermo-optic effect and thermal expansion effect of PDMS and air, the reflection spectra of FPI 1 and FPI 3 will vary in the opposite direction with the temperature change, to achieve the enhanced Vernier effect. A temperature sensitivity of -35.45 nm/°C, much higher than that of the fiber FPI sensor based on conventional vernier effect is achieved, in good agreement with the theoretical analysis. The proposed sensor has the advantages high stability, mechanical strength, small size, low cost, which has a great potential for marine environment detection and bioscience.