In this paper, we present novel semi-permeable graphene-based membranes. Composite filters were designed and fabricated on polysulfone porous scaffolding using combinations of polycrystalline large-area High Strength Metallurgical Graphene (HSMG®), graphene oxide, hydrazine and an in-situ interfacial polymerized polyamide. The naturally occurring defects in HSMG® (which were tenths of a nanometer) were the clue in fabricating a filtering membrane. The performance of graphene membranes was evaluated in forward osmosis test. The prepared composites were proved to be semi-permeable membranes with great ions blocking efficiency (over 95%) and water flux only one order of magnitude lower than the commercial reverse osmosis membranes. The experiments’ results demonstrated that the solutions proposed in this work indicate that graphene-based membranes can be used in water treatment technology.
Graphene has been considered as a material that may overcome the limitations of polymer semi-permeable membranes in water treatment technology. However, monolayer graphene still suffers from defects that cause leakage. Here, we report a method of sealing defects in graphene transferred onto porous polymer substrate via reduced graphene oxide (rGO). The influence of various reducing agents (e.g., vitamin C, hydrazine) on the properties of rGO was investigated by SEM, Raman, FTIR, and XRD. Subsequently, membranes based on graphene/reduced graphene oxide were tested in a forward osmosis system using sodium chloride (NaCl). The effect of the effectiveness of the reduction of graphene oxide, the type and number of attached groups, the change in the distance between the rGO flakes, and the structure of this material were examined in terms of filtration efficiency. As a result, semi-permeable centimetre-scale membranes with ion blocking efficiency of up to 90% and water flux of 20 mL h−1 m−2 bar−1 were proposed.