Anatoly P. Mukhachev

Anatoly P. Mukhachev

Auto-generated profile, based on publicly available information

Anatoly P. Mukhachev

Inst Geotech Mech, Dnipro, Ukraine

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 August 2023 in Alloys
Verified
Journal Article
Open access
PDF file
AMAnatoly Mukhachev
Anatoly Mukhachev
DYDmytro Yelatontsev
Dmytro Yelatontsev
OKOlena Kharytonova
Olena Kharytonova
This article presents the results of studies of the self-propagating high-temperature synthesis (SHS) for obtaining zirconium alloys with niobium by the method of calcium-thermal reduction of nuclear-grade zirconium tetrafluoride in the presence of niobium powder. The optimal heating temperature of the initial charge and the methods of charge mixture with different calcium content were determined. The safety of the SHS process is ensured by the formation of an optimal combustion front of the mixture to remove the released high-pressure gases. A setup for the furnace reduction of zirconium alloys with charge preheating, discharge of molten products into molds of various designs, and control of the time and rate of slag and alloy crystallization has been tested. The required performance of the installation, the degree of transition of zirconium from salt into the alloy, and the purity, structure, and uniformity of the alloy were achieved.

10 June 2022 in Problems of Atomic Science and Technology
Verified
Journal Article
Closed access
AMA.P. Mukhachev
A.P. Mukhachev
DYD.O. Yelatontsev
D.O. Yelatontsev
OKO.A. Kharitonova
O.A. Kharitonova

12 October 2023 in Problems of Atomic Science and Technology
Verified
Journal Article
Closed access
AMA.P. Mukhachev
A.P. Mukhachev
DYD.O. Yelatontsev
D.O. Yelatontsev
OKO.A. Kharytonova
O.A. Kharytonova
VSV.G. Shevchenko
V.G. Shevchenko

1 January 2020 in ChemChemTech
Verified
Journal Article
Closed access
PDF file
DYDmytro Yelatontsev
Dmytro Yelatontsev
AMAnatoly P. Mukhachev
Anatoly P. Mukhachev
A rational scheme for the processing of large-scale agro-industrial waste - walnut shells Juglans Regia L. and apricot kernels Prunus Armeniaca L. was proposed. At first stage, the raw material was delignificated using liquid ammonia to remove hemicelluloses and lignin. Isolated non-wood pulp is chemically modifying to increase sorption and ion exchange properties. For the synthesis of anion exchangers, cellulose was aminated using pyridine or trimethylamine after preliminary treatment consequentially with formalin and C2H5OH in HCl medium. As a result, we obtained high and weakly-basic ion exchangers with nitrogen content of 10.3-11.5% and high exchange capacity towards various classes of inorganic anions. For synthesis of cation exchangers, cellulose was treated with solution consisting of 20% H3PO4, 40% CO(NH2)(2), and 40% H2O. Consequently, we obtained phosphorus-containing high-acidic cation exchangers with exchange capacity towards heavy metal of 5.5-8.6 mmol.cm(-3). Both types of ion exchangers have a high capacity towards uranium: anion exchanger - 4.25 mmol.cm(-3) and cation exchanger - 4.94 mmol.cm(-3), respectively. Average total yield of ion exchangers related to weight of air-dry feedstock was 90%. Synthesized ion exchangers characterized by IR spectroscopy. Presence of amine functional groups -NH 2 in aminated cellulose and phosphate ester groups -OPO(OH)(2) in phosphorylated cellulose was established. Specific surface area and total static exchange capacity of synthesized ion exchangers were established. An environmentally friendly method for the disposal of spent solutions from the synthesis of cation exchangers was proposed. It allows getting a liquid complex fertilizer containing 17% N and 13.9% P2O5. Usage of this fertilizer for grain crops feeding increases plants length by 40-75%, as well as overall biomass increase by 20-30%.

11 April 2023 in Problems of Atomic Science and Technology
Verified
Journal Article
Closed access
AMA.P. Mukhachev
A.P. Mukhachev
DYD.O. Yelatontsev
D.O. Yelatontsev
OKO.A. Kharytonova
O.A. Kharytonova

4 November 2026 in Alloys
Verified
Journal Article
Open access
PDF file
VSVadim Shalomeev
Vadim Shalomeev
AMAnatolii Mukhachev
Anatolii Mukhachev
DYDmytro Yelatontsev
Dmytro Yelatontsev
OKOlena Kharytonova
Olena Kharytonova
This study investigates the effect of Ti, Zr, and Hf microalloying on the microstructure, microhardness, tensile properties, and high-temperature performance of cast ML5 magnesium alloy. The alloy was modified with 0.05, 0.10, and 1.0 wt.% Ti, Zr, or Hf, and the resulting alloys were characterized in the as-cast and heat-treated conditions. The effects of microalloying on grain size, secondary dendrite arm spacing, intermetallic phase morphology and volume fraction, matrix microhardness, tensile strength, elongation, and time to failure under prolonged loading at 150 °C and 80 MPa were evaluated. Ti, Zr, and Hf refined the cast structure and reduced the size of the intermetallic constituents. At 0.05–0.10 wt.%, the additions increased the absolute volume fraction of fine spherical intragranular intermetallic particles; however, the relative balance between spherical and plate-like constituents depended on the alloying element and concentration. At 1.0 wt.%, the plate-like fraction increased more strongly. All three elements increased matrix microhardness and tensile strength, but their relative effects were property-dependent: the increase in matrix microhardness ranked Ti < Zr < Hf, whereas the tensile-strength response after heat treatment ranked Ti < Hf < Zr at the investigated concentrations. For all three elements, elongation increased up to 0.10 wt.% and decreased at 1.0 wt.%. After heat treatment, ML5 containing 0.10 wt.% Hf exhibited a tensile strength of 260.0 MPa, an elongation of 4.9%, and a time to failure of 288.3 h at 150 °C and 80 MPa, compared with 231.8 MPa, 2.9%, and 141.4 h, respectively, for the reference alloy. The results provide a controlled comparison of the concentration-dependent effects of Ti, Zr, and Hf on the grain structure, room-temperature properties, and prolonged-loading performance of cast ML5, while the provenance of overlapping and newly obtained values is specified separately.