Arailym Rymkulova

Arailym Rymkulova

Auto-generated profile, based on publicly available information

Arailym Rymkulova

Карагандинский технический университет им. Абылкаса Сагинова, ТОО «Научно-технический центр промышленной безопасности

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 June 2023 in Mining of Mineral Deposits
Verified
Journal Article
Closed access
ASArnat Salkynov
Arnat Salkynov
ARArailym Rymkulova
Arailym Rymkulova
ASAigerim Suimbayeva
Aigerim Suimbayeva
SZSholpan Zeitinova
Sholpan Zeitinova
Purpose. Determining the patterns for geomechanical state changes in the rock mass, depending on the stoping face technological parameters for sloping ore deposits. Methods. The state-of-the-art CAE Fidesys strength analysis system has been adopted to conduct the research on geomechanical processes around the stoping face, which is effective in a flat formulation. The system used provides a complete engineering process cycle from the preparation of the calculation model to the visualization of the calculation results. The real physical-mechanical properties of ores and host rocks of the Zhezkazgan field (Kazakhstan) are the initial data. Findings. As a research result, the patterns of change in the stress-strain state around the stoping face have been obtained, namely, the maximum tensile and compressive deformations in the room fenders and rocks of a parting, depending on its thickness (from 0 to 10 m). Based on the data obtained, it has been revealed that in the studied mining-geological conditions, elastic deformations predominate around the stoping face. Originality. As a result of conducted numerical experimental studies, a new solution is proposed for an important scientific problem related to predicting the natural and technogenic geomechanical state of the rock mass. Practical implications. The results obtained make it possible to develop technical solutions for the modernization of the room-and-pillar (panel-and-pillar) mining system under conditions of sloping fall of ore bodies in the conditions of the Zhezkazgan field.

30 September 2025 in Mining of Mineral Deposits
Verified
Journal Article
Closed access
Merey BalpanovaMerey Balpanova
Merey Balpanova
GSGylym Sapinov
Gylym Sapinov
ARArailym Rymkulova
Arailym Rymkulova
AOAdilkozha Ospanov
Adilkozha Ospanov
SISveta Imanbayeva
Sveta Imanbayeva
STStanislav Tyan
Stanislav Tyan
Purpose. This research aims to predict the stability of mine workings and assess the risk of rockbursts in conditions of insufficient knowledge of the mechanical rock properties at the Zhaysan deposit (Kazakhstan), while taking into account the depth of the rock mass occurrence and quality, as well as the orientation of the mine workings relative to the tectonic stress field. Methods. The research employs a set of methods: laboratory testing of granitoid and diabase samples, assessment of rock mass disturbance using the Rock Quality Designation (RQD) index, analysis of metasomatically altered rocks, as well as the construction of a simplified 3D geomechanical model using the kriging method. The rock mass strength was predicted using the Hoek-Brown criterion, while the risk of rockbursts was assessed using the Fragility Index (UCS/UTS) and the Canadian method for assessing rockburst potential. The stability of mine workings in different directions was determined by the indicator of weighted frequency of rockfalls and analysis of their ratio with respect to orientation relative to σ1. Findings. It has been found that with increasing depth, the average RQD values increase from 60 to 90%, reflecting a decrease in fracturing and an improvement in rock mass quality. However, in fresh granitoids, there remains a high risk of elastic energy accumulation and its release during destruction. The critical depth at which rockburst risk begins has been determined to be approximately 400 m. The rocks altered metasomatically are characterized by reduced strength and fragility, which reduces their susceptibility to bursts, but increases the probability of caving. It has been revealed that the stability of the mine workings depends on their orientation: minimal damage is fixed when coinciding with the direction σ1 (azimuth ~300°), and the critical is the angle of intersection 45°, after which the volumes of rockfalls increase sharply. Originality. For the first time for the Zhaysan deposit, laboratory tests, geomechanical parameters (RQD, GSI), analytical strength criteria and analysis of the orientation of mine workings relative to the tectonic stress field were integrated to determine the depth boundary of rockburst hazard occurrence. The necessity of distinguishing between fresh and metasomatically altered granitoids is demonstrated when assessing risks and taking into account the direction of mine workings in project solutions. Practical implications. The results make it possible to identify high danger zones and depths, starting from which an enhanced monitoring of the stress state of the rock mass and the application of special safety measures are required. The proposed approach can be tailored for similar solid mineral deposits with limited source data, as well as can be used when selecting a safe direction for mine workings in the tectonic stress field.

20 April 2019 in Geodesy and Cartography
Verified
Journal Article
Closed access
ASAssel Satbergenova
Assel Satbergenova
AKA.B. Kongyrbayeva
A.B. Kongyrbayeva
KRK.K. Rymkulov
K.K. Rymkulov
15 undergraduates’ study tour to DAAD – German Academic Exchange Service in search of new knowledge under the guidance of A. Satbergenova is considered. This article is devoted to the study of experience in the field of geodesy, geoinformatics, land management technologies, geotechnics, recycling household waste, development and implementation in everyday life. The authors tell about visiting cities, universities and mining facilities that the undergraduates saw in Germany. Arranging foreign trips has a positive impact on the results of undergraduates and doctors, promotes the development of collective cooperation, causes a desire to make research and development in local universities, stimulates increasing the level of mastering foreign languages and strengthens patriotic feelings for the Motherland. All participants of the trip express their gratitude to the German Academic Exchange Service – DAAD, as well as to all the leaders who provided the assistance and support in organizing valuable scientific, educational and cultural visit to Germany.

5 February 2024 in Горный журнал Казахстана
Verified
Journal Article
Closed access
АРА.б. Рымқұлова
А.б. Рымқұлова
ШЗШ.б. Зейтинова
Ш.б. Зейтинова
ДЖД.к. Жумадилова
Д.к. Жумадилова
АКА.е. Касымжанова
А.е. Касымжанова
Жәйрем кен орны массивінің физика-механикалық қасиеттерін есептеу нәтижелері келтірілген, олар қабаттасатын қалыңдық, әлсіз жыныстар және қатты тау жыныстары топтарына бөлінеді. Slide бағдарламасында сол және оң жақтағы ашық кеніш жағдауының тұрақтылық есептеулері келтірілген. Модельдеу процесінде бұзылмаған массивтің қасиеттері кезең-кезеңімен табиғи және техногендік шығу тегінің сыртқы әсерлеріне ұшырайды. Нәтижесінде тау жыныстарының беріктік қасиеттері төмендейді. Бишоп пен Янбу әдістері бойынша құрғақ және суланған массивтегі ашық кеніш жағдауының тұрақтылық коэффициенттері анықталды The results of calculating the physical and mechanical properties of the Zhairem deposit massif, which are divided into groups of overlapping strata, weathered rocks and Rock formations, are given. Calculations of the stability of the left and right sides in the Slide program are presented. During the modeling process, the properties of an undisturbed massif are gradually exposed to external influences of natural and man-made origin. As a result, the strength properties of rocks decrease. The coefficients of stability of the sides of the quarry in dry and watered massif were determined using the Bishop and Yanbu methods Даны результаты расчета физико-механических свойств массива Жайремского месторождения, которые распределены на группы перекрывающая толща, выветрелые породы и скальные породы. Представлены расчеты устойчивости левого и правого борта в программе Slide. В процессе моделирования свойства ненарушенного массива поэтапно подвергаются внешним воздействиям природного и техногенного происхождения. В результате снижаются прочностные свойства горных пород. Определены коэффициенты устойчивости бортов карьера в сухом и обводненном массиве по методам Бишопа и Янбу

31 July 2025 in Горный журнал Казахстана
Verified
Journal Article
Open access
ДТД.к. Таханов
Д.к. Таханов
АРА.б. Рымкулова
А.б. Рымкулова
БРБ.р. Рахметов
Б.р. Рахметов
Merey BalpanovaMerey Balpanova
Merey Balpanova
В работе представлен анализ устойчивости откосов карьеров Жайремского месторождения с использованием методов предельного равновесия (LEM) и конечных элементов (FEM). Моделирование выполнено в Slide3 и RS3 с учетом выветрелых пород и воздействия подземных вод. Построены трехмерные модели бортов, рассчитаны коэффициенты устойчивости, определены зоны риска. FEM позволил точнее оценить напряженно-деформированное состояние массива. Интеграция LEM и FEM обеспечила более полную картину устойчивости склонов и применима при проектировании мер безопасности в горных работах. Материалы исследования могут быть полезны специалистам в области геомеханики, проектирования и эксплуатации карьеров, а также при подготовке инженерных кадров в области горного дела Бұл жұмыста Жайрем кен орнының карьерлеріндегі еңістердің тұрақтылығы шекті тепе-теңдік әдісі (LEM) және шектік элементтер әдісі (FEM) арқылы талданған. Модельдеу Slide3 және RS3 бағдарламаларында, әлсіз жыныстар мен жер асты суларының әсерін ескере отырып жүргізілді. Үш өлшемді еңіс модельдері құрылып, тұрақтылық коэффициенттері есептелді және қауіп аймақтары анықталды. FEM әдісі жыныс массасының кернеулі-деформациялық күйін дәлірек бағалауға мүмкіндік берді. LEM және FEM әдістерін біріктіру еңістердің тұрақтылығы туралы толық көрініс алуға мүмкіндік беріп, тау-кен жұмыстарында қауіпсіздік шараларын жобалауда қолдануға болады. Зерттеу материалдары геомеханика, карьер жобалау және пайдалану саласындағы мамандарға, сондай-ақ тау-кен ісі бойынша инженерлік кадрларды даярлауға пайдалы болуы мүмкін The study presents an analysis of slope stability at the Zhairem deposit open pits using the Limit Equilibrium Method (LEM) and the Finite Element Method (FEM). Modeling was carried out in Slide3 and RS3, taking into account weathered rock and the influence of groundwater. Three-dimensional slope models were developed, stability factors calculated, and risk zones identified. FEM provided a more accurate assessment of the stress-strain state of the rock mass. The integration of LEM and FEM offered a more comprehensive view of slope stability and is applicable in designing safety measures for mining operations. The research findings may be useful for professionals in geomechanics, open-pit design and operation, as well as in the training of engineering personnel in the mining industry еңістердің тұрақтылығы, шекті тепе-теңдік әдісі (LEM), шектік элементтер әдісі (FEM), үгілген жыныстар, жер асты сулары, модельдеу, қауіпсіздік коэффициенті. slope stability, LEM, FEM, weathered rocks, groundwater, modeling, safety factor The study presents an analysis of slope stability at the Zhairem deposit open pits using the Limit Equilibrium Method (LEM) and the Finite Element Method (FEM). Modeling was carried out in Slide3 and RS3, taking into account weathered rock and the influence of groundwater. Three-dimensional slope models were developed, stability factors calculated, and risk zones identified. FEM provided a more accurate assessment of the stress-strain state of the rock mass. The integration of LEM and FEM offered a more comprehensive view of slope stability and is applicable in designing safety measures for mining operations. The research findings may be useful for professionals in geomechanics, open-pit design and operation, as well as in the training of engineering personnel in the mining industry.

27 December 2024 in Горный журнал Казахстана
Verified
Journal Article
Closed access
ARA.B. Rymkulova
A.B. Rymkulova
ASA. Smirnov
A. Smirnov
AMA.T. Makasheva
A.T. Makasheva
DID.T. Ivadilinova
D.T. Ivadilinova
The article deals with the development of a technological flowchart of inclined deposits with the angle of incidence of 20-35 degrees by the example of the Zhilandy deposit. The values of the main compressive and tensile stresses were determined depending on the mining depth. The parameters of barrier and inter-chamber pillars were calculated taking into account the depth of development, the thickness and the ore deposit angle of incidence, the complexity of the mining and geological conditions of development, the physical and mechanical properties of rocks, fracturing and the structure of the enclosing rocks. The permissible parameters of the stope and the inter-chamber pillar were determined depending on the angle of occurrence. It was established that an inter-chamber pillar of a classical vertical shape as permissible only if the angle of incidence of the ore body was within 25 degrees; in the other cases, the rock massif is unstable and the probability of collapse of the inter-chamber pillar is very high Мақала жыланды кен орнының мысалында 20-35 градус құлау бұрышы бар көлбеу кен орындарын өңдеудің технологиялық схемасын әзірлеуге арналған. Негізгі қысу және созылу кернеулерінің шамалары жұмыс тереңдігіне байланысты анықталады. Кен орнының игеру тереңдігін, қуаты мен құлау бұрышын, игерудің тау-кен-геологиялық жағдайларының күрделілігін, тау жыныстарының физикалық-механикалық қасиеттерін, жарықтар мен сыйымды жыныстардың құрылысын ескере отырып, тосқауыл және камерааралық бүтіндіктердің параметрлерін есептеу жүзеге асырылды. Тазарту камерасының және камерааралық тұтастықтың рұқсат етілген параметрлері пайда болу бұрышына байланысты анықталды. Классикалық тік форманың камералық тұтастығы кен денесінің құлау бұрышы 25 градусқа дейін болған жағдайда ғана рұқсат етілетіні анықталды, қалған жағдайларда тау жотасы тұрақты емес және камералық тұтастықтың құлау ықтималдығы өте жоғары Статья посвящена разработке технологической схемы отработки наклонных залежей с углом падения 20-35 градусов на примере Жиландинского месторождения. Определены величины главных сжимающих и растягивающих напряжений в зависимости от глубины отработки. Осуществлен расчет параметров барьерных и междукамерных целиков с учетом глубины разработки, мощности и угла падения рудной залежи, сложности горно-геологических условий разработки, физико-механических свойств пород, трещиноватости и строения вмещающих пород. Определены допустимые параметры очистной камеры и междукамерного целика в зависимости от угла залегания. Установлено, что междукамерный целик классической вертикальной формы допустим только в случае, если угол падения рудного тела находится в пределах до 25 градусов, в остальных случаях горный массив не устойчив и вероятность обрушения междукамерного целика весьма велика