1 September 2024 in Civil Engineering Journal
In recent years, the development of the mining industry in the Republic of Kazakhstan has been accompanied by the commissioning of new underground levels for many existing mineral deposits, which were initially developed through open-pit mining. As the depth of open-pit mining increases, the volume of overburden rises sharply, making open-pit mining unprofitable due to the significant amount of additional mining work required. For this reason, most open-pit mines in Kazakhstan are transitioning to underground mining, or combined mining. Many researchers have examined the timing of this transition and have worked on optimizing it to determine the best economic efficiency and manage risks. However, there is limited information available on how to determine the optimal location for a vertical mine shaft when transitioning from open-pit to underground mining. The purpose of this study is to identify a safe location for a vertical shaft in combined mining operations. Specifically, the study assesses the impact of the open-pit mine on the selection of the mine shaft’s location, considering the stress-strain state of the rock mass during combined mining methods. To address these objectives, numerical modeling of the stress-strain state around vertical excavations during combined mining was performed. The results provide a solution to the critical issue of determining the location of the mine shaft in combined geotechnology and lay the groundwork for further research on shaft placement in Kazakhstan. The novelty of this study lies in identifying the shaft location by considering the geometric shape of the open-pit mine and the depth of development. Doi: 10.28991/CEJ-2024-010-09-010 Full Text: PDF
30 September 2022 in Mining of Mineral Deposits
Purpose. Studying the stress-strain state of the rock mass under the open pit, taking into account the change in the open-pit bottom width in order to reveal the geomechanical state and determine the safe parameters of the rock bridge. Methods. The peculiarities of the stress-strain state formation in the transition zone have been studied according to the methodology using numerical research methods and taking into account the geological strength index (GSI). Using this index, it is possible to take into account rock fracturing, water cut, lithology and other strength indicators, due to which there is a correct transition from the rock sample strength to the mass strength. Findings. Based on the numerical modeling results, it has been determined that an increase in the open-pit bottom width leads to a decrease in the zone of tensile stresses concentration in the arch pillar of the stope block. This, in turn, has a positive effect on the rock bridge stability, that is, the probability of the rock bridge collapse does not increase with an increase in the width of the open-pit bottom. Originality. For the first time, the dependence has been obtained of the horizontal stresses σ3 distribution at the stages of the open-pit bottom expansion at the Akzhal Zinc-Lead Mine. This makes it possible to realistically predict changes in the geomechanical state of the rock bridge depending on the width of the open-pit bottom. Practical implications. When predicting the change in the stress-strain state in the transition zone and determining the rock bridge safe parameters, it is possible to reduce the probability of their destruction and make timely management decisions on safe conditions for mining the reserves.
1 April 2019 in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
To the problem of selecting vertical shafts location with combined geotechnology of developing deposits
30 June 2023 in Mining of Mineral Deposits
Purpose. Determining the patterns for geomechanical state changes in the rock mass, depending on the stoping face technological parameters for sloping ore deposits. Methods. The state-of-the-art CAE Fidesys strength analysis system has been adopted to conduct the research on geomechanical processes around the stoping face, which is effective in a flat formulation. The system used provides a complete engineering process cycle from the preparation of the calculation model to the visualization of the calculation results. The real physical-mechanical properties of ores and host rocks of the Zhezkazgan field (Kazakhstan) are the initial data. Findings. As a research result, the patterns of change in the stress-strain state around the stoping face have been obtained, namely, the maximum tensile and compressive deformations in the room fenders and rocks of a parting, depending on its thickness (from 0 to 10 m). Based on the data obtained, it has been revealed that in the studied mining-geological conditions, elastic deformations predominate around the stoping face. Originality. As a result of conducted numerical experimental studies, a new solution is proposed for an important scientific problem related to predicting the natural and technogenic geomechanical state of the rock mass. Practical implications. The results obtained make it possible to develop technical solutions for the modernization of the room-and-pillar (panel-and-pillar) mining system under conditions of sloping fall of ore bodies in the conditions of the Zhezkazgan field.
30 June 2024 in Mining of Mineral Deposits
Purpose. The research aims to conduct a comprehensive study of the mechanical properties of ores and rocks within the Zhilandy Group field, as well as to assess the natural field of mass stress state to solve geomechanical problems in optimizing mining operations. Methods. To determine the boundary conditions when measuring the stress-strain state of the mass, a complex methodology is proposed, including stress measurements using hydraulic fracturing methods of the wells and determining the physical-mechanical properties of rocks. Five rock probes have been tested. Twelve tests (six tests in natural and six in water-saturated states) have been conducted for each probe. Findings. Hydraulic fracturing tests at the metering stations show significant tectonic stress due to the shape of structural folds and the mass fracturing. It has been revealed that the hard rock mass is characterized by non-uniform fracturing. It is of tectonic origin and averages between 10-15 and 15-25 fractures per meter for different lithological varieties. The maximum horizontal stress at the stations is oriented along an azimuth of 70° ± 10. Originality. The influence of water saturation on the reduction of strength and deformation characteristics of rocks has been determined for the conditions of the Zhilandy Group field, which shows significant variations depending on the rock type. Especially important is the revealed fact of a significant decrease in uniaxial compression and uniaxial tensile strength, as well as a decrease in Young’s modulus and cohesion factor. Linear dependences of stresses occurring with depth have been obtained from the measurement results. Practical implications. The results obtained are of significant importance for the mining industry. Understanding the extent of reduction in strength characteristics during water saturation and assessing the natural field of the stress mass state allows more accurate prediction of rock behavior.
1 September 2025 in Journal of Human, Earth, and Future
This study presents an analysis of open-pit bench stability based on laboratory strength testing of limestone and kinematic analysis of rock mass fracturing. The Hoek-Brown criterion was applied to determine the uniaxial compressive strength (UCS) of intact rock samples and the internal friction angle using RocData_v5. The UCS was measured at 82 MPa, with additional consideration given to the D factor, which accounts for blast-induced rock mass damage. Stability analysis was conducted using Dips and SWedge software, revealing that planar sliding and wedge failures dominate on the northeastern slope. The results indicate that 35% of fracture intersections fall within the critical wedge failure zone, and the actual bench stability is below the internationally accepted threshold (25–50%). To mitigate these risks, it is recommended to adjust the pit slope orientation to an azimuth of 325–310°, revise the Stage 2 pit design by reducing the bench angle to 60°, avoid bench strike directions between 330–360°, employ controlled blasting techniques, or increase berm width to 12 meters.