Oleh Marus

Oleh Marus

Auto-generated profile, based on publicly available information

Oleh Marus

National University of Life and Environmental Sciences of Ukraine

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 August 2023 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
GGGennadii Golub
Gennadii Golub
NTNataliya Tsyvenkova
Nataliya Tsyvenkova
OYOksana Yaremenko
Oksana Yaremenko
OMOleh Marus
Oleh Marus
IOIvan Omarov
Ivan Omarov
AНAnna Нolubenko
Anna Нolubenko
The object of this study is photovoltaic modules in various installation options. The physical model of the Earth's illumination by a parallel flow of solar rays has been refined. The dependence of the cosine of the angle of incidence of the Sun's rays on the angular length of the day, as well as the average annual efficiency of the installation of photovoltaic modules, both fixed and with various tracking options, was determined. Refinement of the physical model implies determining the angle of inclination as the angle between the inclined axis of the Earth and its projection on a vertical plane, perpendicular to the line connecting the centers of the Earth and the Sun. This line passes through the center of the Earth. The concept of the average annual efficiency of the installation of photovoltaic modules is introduced as the annual weighted average value of the cosine of the angle of incidence of solar rays on the plane of the photovoltaic module. Various options for installing photovoltaic modules were analyzed: fixed horizontal on the equator; stationary, installed at an angle to the horizon; one that performs tracking in horizontal (vertical) planes; with full tracking. The efficiency of installing a photovoltaic module at each latitude can be equal to the efficiency of installing this module at the equator, that is, 47.93 % when installing the module at an angle of inclination to the horizon equal to the latitude. Tracking in the vertical plane makes it possible to increase the efficiency of the photovoltaic module installation by up to 50 %. Compared to full tracking, tracking in the horizontal plane at an angle of latitude makes it possible to obtain the efficiency of the installation of the photovoltaic module at the level of 97.93 %. The results could be used as a basis for evaluating the efficiency of the installation of photovoltaic modules at different latitudes with different techniques of their installation, as well as for the subsequent generation of electricity

30 April 2024 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
GGGennadii Golub
Gennadii Golub
NTNataliya Tsyvenkova
Nataliya Tsyvenkova
Volodymyr NadyktoVolodymyr Nadykto
Volodymyr Nadykto
OMOleh Marus
Oleh Marus
OYOksana Yaremenko
Oksana Yaremenko
OMOleksandr Medvedskyi
Oleksandr Medvedskyi
The object of this study is photovoltaic modules with different options for the angle of their installation to the horizon at different geographical latitudes. The scientific problem to solve was determining the dependence of the average annual efficiency of solar photovoltaic modules on the mounting angle of photovoltaic modules and the value of geographical latitude. It has been proven that the efficiency of installation of solar photovoltaic modules can be increased by reducing the angle of their inclination to the horizon depending on the value of the geographical latitude at which they are installed. The average annual efficiency of photovoltaic modules with different mounting angles to the horizon at different geographical latitudes was determined as the annual weighted average value of the cosine of the angle of incidence of solar rays on the plane of the photovoltaic module. The maximum of the average annual efficiency of photovoltaic modules corresponds to a smaller value of the angle of their installation to the horizon than the value of the geographical latitude. So, with a latitude value of 10°, 20°, 30°, 40°, 50°, and 60°, the mounting angle of photovoltaic modules to the horizon will be 9.5°, 18.8°, 28°, 37°, 45.8°, and 54°, respectively. A dependence was derived that allows determining the mounting angle of photovoltaic modules to the horizon dependent on the value of the geographical latitude at which they are installed. A mathematical expression was also constructed that makes it possible to determine the average annual efficiency of photovoltaic modules depending on the angle of their installation to the horizon for different values of geographic latitude. The results could be used in calculating the average annual efficiency of photovoltaic modules based on the adjusted values of the angle of their installation to the horizon at different geographical latitudes

30 December 2024 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
GGGennadii Golub
Gennadii Golub
OYOksana Yaremenko
Oksana Yaremenko
PKPetro Kucheruk
Petro Kucheruk
OMOleh Marus
Oleh Marus
NTNataliya Tsyvenkova
Nataliya Tsyvenkova
YYYaroslav Yarosh
Yaroslav Yarosh
The object of this study is the process of anaerobic fermentation of wastewater sludge from aquaculture. It was established that the exponential dependence adequately describes the experimental data on the change in the level of decomposition of dry organic matter (DOM) and the specific yield of biomethane per unit of decomposed DOM of aquaculture wastewater sediment depending on the time of anaerobic fermentation. The maximum level of DOM decomposition during anaerobic fermentation achieved in 38 days was 0.74 relative units at a process speed of 0.108 relative units per day. The integrated level of DOM decomposition over 21 days of anaerobic fermentation can reach only 0.43 relative units, and the integrated level of DOM decomposition is set at the level of 0.033 relative units per day. The output of biogas and biomethane during anaerobic fermentation over 21 days of anaerobic fermentation reached 4.083 and 2.627 l, respectively. At the same time, the concentration of biomethane in biogas on day 7 of fermentation reached 74‒75 % and remained at this level until day 21. The maximum level of specific yield of biomethane during anaerobic fermentation reached on day 38 was 803.936 ml in terms of normal conditions per gram of decomposed DOM with a rate of change of the specific yield of biomethane of 0.207 ml in terms of normal conditions per gram of decomposed DOM per day. The integrated specific yield of biomethane over 21 days of anaerobic fermentation could reach 580‒590 ml in terms of normal conditions per gram of decomposed DOM. With a fermentation time of 21 days, the specific output of biomethane has an optimal value depending on the periodicity of loading the reactor, which is 1.48‒1.49 m3 of biomethane per one m3 of biomass in the reactor in one day with a periodicity of loading the reactor once per time from 4.5 to 6 days. The research results could be used to determine the volume of biomethane production and electricity based on it during the anaerobic fermentation of aquaculture wastewater sludge

28 June 2024 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
GGGennadii Golub
Gennadii Golub
NTNataliya Tsyvenkova
Nataliya Tsyvenkova
Volodymyr NadyktoVolodymyr Nadykto
Volodymyr Nadykto
OMOleh Marus
Oleh Marus
OKOleg Kepko
Oleg Kepko
MZMaksym Zayets
Maksym Zayets
The object of this study is photovoltaic modules with different seasonal tilt angles at different geographical latitudes. The average annual efficiency of photovoltaic modules with different seasonal angles set at different geographical latitudes has been determined as the annual weighted average value of the cosine of the angle of incidence of solar rays on the plane of the photovoltaic module. The influence of seasonal tilt angles of photovoltaic modules at different geographical latitudes on their average annual efficiency was analyzed. Approximate values of the seasonal tilt angles of photovoltaic modules at different geographic latitudes take values that differ from the geographic latitude value by plus 15° for the winter period and minus 15° for the summer period. Modeling the average annual efficiency of photovoltaic modules depending on the seasonal tilt angles at different geographical latitudes made it possible to obtain refined values of the seasonal tilt angles of photovoltaic modules. Thus, at the latitude of 0°, 10°, 20°, 30°, 40°, 50°, and 60°, the tilt angle of photovoltaic modules for the winter period will be 14.8°, 24.6°, 34.5°. 44.4°, 54.1°, 63.6°, and 73°, respectively, and for summer ‒ minus 14.5°, minus 4.6°, 5°, 15.1°, 25.1°, 34.9°, and 44.7°. Dependences were obtained for determining the seasonal tilt angles of photovoltaic modules depending on the value of geographic latitude. The difference in the average annual efficiency of photovoltaic modules, which are installed at seasonal angles, and photovoltaic modules, which track the position of the Sun in the vertical plane, is 0.4 %. The results could be used as a basis for evaluating the efficiency of photovoltaic modules when determining the seasonal tilt angle at different geographic latitudes

30 April 2025 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
VGVictor Golub
Victor Golub
SBSerhii Bisyk
Serhii Bisyk
GGGennadii Golub
Gennadii Golub
NTNataliya Tsyvenkova
Nataliya Tsyvenkova
SSSviatoslav Sedov
Sviatoslav Sedov
YYYaroslav Yarosh
Yaroslav Yarosh
The object of this study is combat wheeled vehicles (CWVs). The task addressed is the categorization of CWVs. The devised CWV categorization method is based on the use of the fuzzy c-means (FCM) algorithm, which determines the centers of fuzzy clusters and their corresponding functions and memberships, which can take values in the interval from 0 to 1. Therefore, the degrees of membership of CWV samples to fuzzy clusters have been determined, which together define the fuzzy division of the initial set of CWV samples. The minimum number of samples required to solve the fuzzy clustering problem by determining the values of the objective function and the magnitude of its increment per sample with a sequential increase in the number of samples is 55 pieces. It has been confirmed that the maximum number of clusters at level 6 satisfies the needs of categorization and does not require their increase due to the presence of individual CWV samples with large degrees of membership in 2-clusters. It has been proven that with a weight parameter value of 1.68, the fuzziness of the membership matrix ensures an average level of membership of samples to 6 clusters at a level of not less than 99 %. The proposed CWV categorization method establishes a correspondence between the technical characteristics of the samples and their functional purpose. This makes it possible to take into account the uncertainties caused by the assignment of samples with intermediate characteristics between groups to one group. The resulting categorization results establish benchmarks to which CWV samples should approach when designing CWV types, which are constructed on the basis of unified units and assemblies. The results of this study could be used to determine CWV samples of the same type under conditions of a significant variety of options for providing units

1 April 2025 in Vidnovluvana energetika
Verified
Journal Article
Open access
PDF file
GGGennadii Golub
Gennadii Golub
OYO. Yaremenko
O. Yaremenko
OMO. Marus
O. Marus
NTNataliya Tsyvenkova
Nataliya Tsyvenkova
HCH. Chetveryk
H. Chetveryk
The aim of the article is to study the parameters of wastewater settling in recirculating aquaculture systems (RAS) during the cultivation of African sharptooth catfish. The volumes of freshwater fish farming using such systems are steadily increasing. However, RAS have a disadvantage in that they require the disposal of contaminated wastewater generated during the washing of the filter meshes of the me-chanical filters through which the recirculated water passes. It is advisable to use wastewater settling tanks in RAS be-cause they are quite effective in removing total suspended solids (TSS) and have a relatively low cost, which leads to their high economic efficiency. The results of studies on the settling of wastewater from mechanical filters using RAS during the cultivation of Clarias gariepinus confirmed the possibility of carrying out this process with high efficiency and using simple equipment in the case of further utilization of sludge and settled wastewater. The TSS content in the settled wastewater after the settling tank was 0.07±0.015 g/l, while the TSS content in the recircu-lating water after the mechanical filter was 0.057±0.023 g/l, which allows the use of the settling tank to replace the mechanical filter for RAS during the cultivation of Clarias gariepinus. Such a replacement will make it possible to remove only the sludge from the RAS, with its amount not exceeding 7 % of the amount of mechanical filter flush water. The expediency of creating a settling system based on two settling tanks was established: the first one for settling the wastewater from mechanical filters and the second one for settling the sludge obtained at the first stage of settling, which will reduce the amount of sludge for further utilization to 3 % of the amount of waste rinse water from mechanical filters. The settled wastewater from the settling tanks can be used in hydroponics systems or for irrigation, and the sludge after two-stage settling can be used for biogas production.