Riza Hadi Saputra

Riza Hadi Saputra

Auto-generated profile, based on publicly available information

Riza Hadi Saputra

Institut Teknologi Kalimantan

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 November 2015
Verified
Conference Paper
Closed access
IHIrsyad Nashirul Haq
Irsyad Nashirul Haq
RSRiza Hadi Saputra
Riza Hadi Saputra
FEFrans Edison
Frans Edison
DKDeddy Kurniadi
Deddy Kurniadi
ELEdi Leksono
Edi Leksono
BYBrian Yuliarto
Brian Yuliarto
In this research work, we demonstrate state-of-charge (SoC) estimation using support vector regression (SVR) approach for a high capacity Lithium Ferro Phosphate (LiFePO4) battery module. The proposed SoC estimator in this work is extracted from open circuit voltage (OCV)-SoC lookup table which is obtained from the battery module discharging and charging testing cycles, using voltage and current as independent variables. The SoC estimation based on SVR gives a perfectly linear curve fitting with its reference within the range of 37.5% to 90% while the rest hysteresis due to the discharging and charging process is compensated using OCV-SoC curve as the training data set. The SVR estimates the battery module SoC with RMSE of 2.3% over the whole test and the maximum positive and negative error is 4%, which means that it shows good accuracy.

30 December 2022 in Jurnal Teknik Elektro
Verified
Journal Article
Closed access
PDF file
RSRiza Hadi Saputra
Riza Hadi Saputra
AMAdi Mahmud Jaya Marindra
Adi Mahmud Jaya Marindra
MNMuhammad Agung Nursyeha
Muhammad Agung Nursyeha
DFDwi Kurnia Agung Fariyani
Dwi Kurnia Agung Fariyani
Lithium-Ion (Li-ion) battery is essential in today's energy systems and electric vehicles (EVs). Although Li-ion battery can be charged quickly and have a high energy density, it has several drawbacks, including the rapid degradation of battery performance, especially in terms of battery capacity. Therefore, evaluating its performance degradation is necessary to understand its characteristics. In this paper, the performance degradation of a Li-ion battery is monitored and evaluated from multiple SoC measurements. A simple and low-cost experimental setup consisting of sensors, a microcontroller, and a PC is developed to measure and record the real-time data of Li-ion battery voltage and current. Then, the battery state of charge (SoC) is determined using the Coulomb Counting method, which is based on the incoming and outgoing currents of the battery. As a result, this study derives three parameters that indicate the performance degradation of a Li-ion battery, i.e., SoC, battery capacity, and discharge time. From multiple direct measurements with constant load and C20 discharge process, the minimum SoC value increases from 11% to 18%, while battery capacity decreases from 8.8Ah to 8.3 Ah and, discharge time decreases from 16.9 hours to 16.4 hours. All of those parameters indicate a degradation of around 7% in battery performance. Therefore, this research paves the way for finding a solution to mitigate the quick performance degradation of Li-ion batteries.

1 April 2021 in Journal of Physics: Conference Series
Verified
Conference Paper
Open access
ASAin Sahara
Ain Sahara
RSRiza Hadi Saputra
Riza Hadi Saputra
BHBaba Hendra
Baba Hendra
Technological advances are now launching the industrial revolution 4.0, where an automation system is an essential tool in the industrial world. In the industrial world, we need a tool that can accelerate and produce processes that can run effectively and efficiently and can improve the quality and needs of production. Therefore a prototype of a high-based object sorting conveyor is controlled by Arduino Uno which controls the automatic item sorting process. This conveyor prototype uses the HC-SR04 Ultrasonic Sensor component with the aim that it can be applied to facilitate the process of selecting objects in the industrial field. Also, Arduino Uno has made a program in advance using a programming language created on specialised software to produce outputs that control the process of sorting objects. This prototype is then programmed to be able to make automatic item selection with a maximum limit of objects that can be accommodated by the conveyor is 200 grams, with variations in the height of the object reaching 1-6 cm. Based on data from the test results, the prototype conveyor has a success rate in selecting objects of ± 92%.

20 October 2025 in ELKHA
Verified
Journal Article
Open access
PDF file
RSRiza Hadi Saputra
Riza Hadi Saputra
AGAndhika Giyantara
Andhika Giyantara
MDMuhammad Ridho Dewanto
Muhammad Ridho Dewanto
JSJheskia Ardito Sawung
Jheskia Ardito Sawung
Lithium-ion (Li-ion) batteries are one of the most widely used energy storage technologies due to their advantages in high energy density, fast rechargeability, and efficiency. However, behind these advantages lie the weaknesses of lithium-ion batteries, namely that their performance and lifespan are greatly influenced by factors such as C-rate and lithium-ion battery temperature. A high C-rate can increase temperature and accelerate battery degradation, while a low C-rate tends to result in lower temperatures and more optimal capacity. This study aims to design an Internet of Things (IoT)-based State of Charge (SoC) monitoring system capable of real-time battery condition monitoring. The system uses an ESP32 microcontroller connected to a voltage sensor, an ACS712 current sensor, and an LM35 temperature sensor. The collected data is sent to Firebase and displayed through an Android application based on MIT App Inventor. The study focused on discharge cycles with varying C-rates: 1C, C/2, C/5, C/10, and C/20. SoC estimation was performed using the coulomb counting method. The results showed that as the C-rate decreases, the obtained capacity tends to increase, even exceeding the nominal capacity at C/20. Accuracy evaluation using RMSE yielded error values ranging from 0.12% to 4.04%. This system can serve as an effective solution for IoT-based battery monitoring

30 October 2026 in PETROGAS: Journal of Energy and Technology
Verified
Journal Article
Open access
PDF file
RSRiza Hadi Saputra
Riza Hadi Saputra
NMNathanael Noel Gabriel Mamesah
Nathanael Noel Gabriel Mamesah
AUAmalia Rizqi Utami
Amalia Rizqi Utami
The development of the Internet of Things (IoT) has enabled wireless battery monitoring through web-based platforms. This study aims to design and develop a wireless battery monitoring system capable of monitoring battery voltage, current, power, battery temperature, ambient temperature, and inverter output voltage while providing remote relay control. The system employs an ESP32 microcontroller integrated with INA219, ZMPT101B, DS18B20, and DHT22 sensors, with ThingSpeak as the monitoring platform. The research method includes system design, implementation, integration, and performance evaluation through sensor accuracy and wireless communication testing. The results show a 100% communication success rate with an average transmission interval of 15 s. The average measurement errors were 0.44% for voltage, 0.46% for current, and 0.26% for battery temperature, while the relay control function operated successfully. These results demonstrate that the proposed system provides reliable wireless battery monitoring and remote relay control based on IoT.

30 October 2026 in PETROGAS: Journal of Energy and Technology
Verified
Journal Article
Open access
PDF file
RSRiza Hadi Saputra
Riza Hadi Saputra
LALuthfy Dian Afrizzal
Luthfy Dian Afrizzal
MNMuhammad Agung Nursyeha
Muhammad Agung Nursyeha
The growing use of lithium-ion batteries in electric vehicles and energy storage systems requires a better understanding of degradation caused by overcharge and overdischarge conditions, which accelerate capacity loss and reduce battery State of Health (SOH). This study analyzes the effect of overcharge and overdischarge on the SOH of lithium-ion batteries at three current rates (C/5, C/10, and C/20). An Arduino Uno was integrated with an ACS712 current sensor, a voltage divider, and a DS18B20 temperature sensor to acquire real-time data. Battery capacity was calculated using the Coulomb counting method, and SOH was determined by comparing actual capacity to the initial capacity. Results show that overcharge produced Capacity fade of 15.30%, 3.87%, and 2.93%, with SOH of 84.70%, 96.13%, and 97.07% for C/5, C/10, and C/20, respectively, while overdischarge produced Capacity fade of 24.11%, 4.32%, and 6.75%, with SOH of 74.89%, 95.68%, and 93.25%. At C/5, SOH after overdischarge fell below the 80% end-of-life threshold, whereas all overcharge variations remained above it, indicating that overdischarge causes more severe degradation than overcharge at the same current rate. These findings support the development of safer operating strategies and more reliable Battery Management Systems (BMS) for lithium-ion batteries.