Plasma deposition techniques like ion-beam-sputtering (IBS) are state of the art to manufacture high quality optical components for laser applications. Besides the well optimized process and monitoring systems, the coating material selection is integral to achieve optimum optical performances. Applying the IBS technology, an approach is presented to create novel materials by the direct application of binary oxides in a quantizing structure. By reducing the physical thickness of the high refractive index material to a few nm, within a classical high-low index stack, the electron confinement can be changed. Optical characterizations of the manufactured samples with decreasing quantum well thicknesses result in an increasing blue shift of the absorption gap and offer a method to approximate the effective mass of the high refractive index material in conjunction with theoretical models. Laser-induced damage threshold tests of coating samples prepared with different well thicknesses indicate an increase of the measured threshold values with optical gap energy.
The standardization of laser damage testing is an important prerequisite for development and quality control of optical components exposed to high-power laser beams. The ISO working group ISO/TC 172/SC9/WG6 is currently engaged with the preparation of a standard for laser damage testing. The first part of this standard which is concerned with 1-on-1 damage testing has reached the status of a draft international standard: ISO/DIS 11254-1. To test for the practicability of this characterization method, a round robin experiment was performed within the framework of the EUROLASER-CHOCLAB project. Identical sets of typical Nd:YAG laser components were distributed to the above-mentioned laboratories for LIDT measurements in conformance with the standard. The results are summarized in this paper. Additionally, damage morphologies were examined by microscopic techniques like Nomarksi differential interference contrast and scanning force microscopy.
Laser-induced damage threshold determination as a function of the number of incident pulses on a specific optic is a classic problem in laser damage studies. There are several models of the fundamental mechanisms explaining the fatigue laser damage behavior including temperature accumulation and changes of electronic or chemical material structure. Herewith we discuss the effects of unstable laser radiation on S-on-1 laser-induced damage probability. Numerical simulations of S-on-1 measurements for specific cases of defect densities, spot sizes and beam jitters are performed. It is demonstrated that the statistical effects of "pseudo-accumulation" reasoned by unstable laser radiation in transparent dielectrics containing nanometer sized defects leads to accumulation-like behavior. The magnitudes of the random beam walking and the energy fluctuations are directly related to the damage probability. Experimental results are also introduced to illustrate the theoretical results.
The development of characterization tools for the deep-ultraviolet (DUV)/vacuum-ultraviolet (VUV) spectral range gains of increasing importance considering the applicability of optics in adequate facilities. At the Laser Zentrum Hannover, procedures for the investigation of optical parameters, i.e. transmittance, reflectance, absorption and scattering, are developed. In the last two years, a spectrophotometric unit was redesigned allowing a comprehensive characterization of optical components in the wavelength range between 115nm and 310nm. The paper describes the developed device in detail and discusses the sources of error with regard to their influence on measured data. Different investigations were performed and are presented in dependence on the wavelength, the adjusted angle of incidence (AOI) and the polarization of the incident beam. Furthermore, numerous measuring methods are explained which are supported by the in-house compiled software package.