Valdas Sirutkaitis

Dr. Valdas Sirutkaitis

orcid

Research Focus & Metrics

Academic Career Length

28Years (1999-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 July 2020 in Micromachines
Verified
Journal Article
Open access
PDF file
SBSimas Butkus
Simas Butkus
Vytautas JuknaVytautas Jukna
Vytautas Jukna
DPDomas Paipulas
Domas Paipulas
MBMartynas Barkauskas
Martynas Barkauskas
VSValdas Sirutkaitis
Valdas Sirutkaitis
In this work, a burst mode laser is used for micromachining of 20 µm–250 µm thick Invar (Fe64/Ni36) foils. Holes were drilled by firing multiple pulses transversely onto the sample without moving the beam (percussion drilling). The utilized laser system generates a burst of a controllable number of pulses (at 1030 nm) with tunable pulse-to-pulse time spacing ranging from 200 ps to 16 ns. The sub-pulses within the burst have equal amplitudes and a constant duration of 300 fs that do not change regardless of the spacing in time between them. In such a way, the laser generates GHz to MHz repetition rate pulse bursts with a burst repetition rate ranging from 100 kHz to a single shot. Drilling of the material is compared with the non-burst mode of kHz repetition rate. In addition, we analyze the drilling speed and the resulting dependence of the quality of the holes on the number of pulses per burst as well as the average laser power to find the optimal micromachining parameters for percussion drilling. We demonstrate that the micromachining throughput can be of an order of magnitude higher when using the burst mode as compared to the best results of the conventional kHz case; however, excess thermal damage was also evident in some cases.

12 April 2022 in Materials
Verified
Journal Article
Open access
PDF file
ABAgnė Butkutė
Agnė Butkutė
GMGreta Merkininkaitė
Greta Merkininkaitė
TJTomas Jurkšas
Tomas Jurkšas
JSJokūbas Stančikas
Jokūbas Stančikas
TBTomas Baravykas
Tomas Baravykas
LJLinas Jonušauskas
Linas Jonušauskas
Selective laser etching (SLE) is a technique that allows the fabrication of arbitrarily shaped glass micro-objects. In this work, we show how the capabilities of this technology can be improved in terms of selectivity and etch rate by applying an etchant solution based on a Potassium Hydroxide, water, and isopropanol mixture. By varying the concentrations of these constituents, the wetting properties, as well as the chemical reaction of fused silica etching, can be changed, allowing us to achieve etching rates in modified fused silica up to 820 μm/h and selectivity up to ∼3000. This is used to produce a high aspect ratio (up to 1:1000), straight and spiral microfluidic channels which are embedded inside a volume of glass. Complex 3D glass micro-structures are also demonstrated.

10 December 2020 in Micromachines
Verified
Journal Article
Open access
PDF file
EKEvaldas Kažukauskas
Evaldas Kažukauskas
SBSimas Butkus
Simas Butkus
PTPiotr Tokarski
Piotr Tokarski
Vytautas JuknaVytautas Jukna
Vytautas Jukna
MBMartynas Barkauskas
Martynas Barkauskas
VSValdas Sirutkaitis
Valdas Sirutkaitis
Biocompatible polymers are used for many different purposes (catheters, artificial heart components, dentistry products, etc.). An important field for biocompatible polymers is the production of vision implants known as intraocular lenses or custom-shape contact lenses. Typically, curved surfaces are manufactured by mechanical means such as milling, turning or lathe cutting. The 2.5 D objects/surfaces can also be manufactured by means of laser micromachining; however, due to the nature of light–matter interaction, it is difficult to produce a surface finish with surface roughness values lower than ~1 µm Ra. Therefore, laser micromachining alone can’t produce the final parts with optical-grade quality. Laser machined surfaces may be polished via mechanical methods; however, the process may take up to several days, which makes the production of implants economically challenging. The aim of this study is the investigation of the polishing capabilities of rough (~1 µm Ra) hydrophilic acrylic surfaces using bursts of femtosecond laser pulses. By changing different laser parameters, it was possible to find a regime where the surface roughness can be minimized to 18 nm Ra, while the polishing of the entire part takes a matter of seconds. The produced surface demonstrates a transparent appearance and the process shows great promise towards commercial fabrication of low surface roughness custom-shape optics.

20 December 2022 in Micromachines
Verified
Journal Article
Open access
PDF file
ABAgnė Butkutė
Agnė Butkutė
RSRomualdas Sirutkaitis
Romualdas Sirutkaitis
DGDarius Gailevicius
Darius Gailevicius
DPDomas Paipulas
Domas Paipulas
VSValdas Sirutkaitis
Valdas Sirutkaitis
Transparent and high-hardness materials have become the object of wide interest due to their optical and mechanical properties; most notably, concerning technical glasses and crystals. A notable example is sapphire—one of the most rigid materials having impressive mechanical stability, high melting point and a wide transparency window reaching into the UV range, together with impressive laser-induced damage thresholds. Nonetheless, using this material for 3D micro-fabrication is not straightforward due to its brittle nature. On the microscale, selective laser etching (SLE) technology is an appropriate approach for such media. Therefore, we present our research on C-cut crystalline sapphire microprocessing by using femtosecond radiation-induced SLE. Here, we demonstrate a comparison between different wavelength radiation (1030 nm, 515 nm, 343 nm) usage for material modification and various etchants (hydrofluoric acid, sodium hydroxide, potassium hydroxide and sulphuric and phosphoric acid mixture) comparison. Due to the inability to etch crystalline sapphire, regular SLE etchants, such as hydrofluoric acid or potassium hydroxide, have limited adoption in sapphire selective laser etching. Meanwhile, a 78% sulphuric and 22% phosphoric acid mixture at 270 °C temperature is a good alternative for this process. We present the changes in the material after the separate processing steps. After comparing different processing protocols, the perspective is demonstrated for sapphire structure formation.

17 December 2003 in Applied Physics Letters
Verified
Journal Article
Closed access
RAR. Adomavičius
R. Adomavičius
AKA. Krotkus
A. Krotkus
KBK. Bertulis
K. Bertulis
VSValdas Sirutkaitis
Valdas Sirutkaitis
RBRytis Butkus
Rytis Butkus
APA. Piskarskas
A. Piskarskas
We study hole dynamics in GaAs layers grown by molecular-beam epitaxy at 270 °C by two-color pump-and-probe experiments employing femtosecond 800-nm-wavelength pulses for sample’s excitation and 9-μm-wavelength pulses for probing the induced intervalence band absorption. Hole trapping time in as-grown, undoped layer is equal to 2 ps; it increases after thermal annealing or Be doping, and decreases in Si-doped layer. The mechanism of the hole trapping is discussed; it is shown that experimental observations are consistent with the hole trapping at neutral arsenic antisites model.

8 October 2008
Verified
Conference Paper
Closed access
PDF file
AMAndrius Melninkaitis
Andrius Melninkaitis
JMJulius Mirauskas
Julius Mirauskas
MJMarco Jupe
Marco Jupe
DRDetlev Ristau
Detlev Ristau
JAJonathan W Arenberg
Jonathan W Arenberg
VSValdas Sirutkaitis
Valdas Sirutkaitis
Laser-induced damage threshold determination as a function of the number of incident pulses on a specific optic is a classic problem in laser damage studies. There are several models of the fundamental mechanisms explaining the fatigue laser damage behavior including temperature accumulation and changes of electronic or chemical material structure. Herewith we discuss the effects of unstable laser radiation on S-on-1 laser-induced damage probability. Numerical simulations of S-on-1 measurements for specific cases of defect densities, spot sizes and beam jitters are performed. It is demonstrated that the statistical effects of "pseudo-accumulation" reasoned by unstable laser radiation in transparent dielectrics containing nanometer sized defects leads to accumulation-like behavior. The magnitudes of the random beam walking and the energy fluctuations are directly related to the damage probability. Experimental results are also introduced to illustrate the theoretical results.