An overview of welding methods and process parameters and its effects on mechanical behaviour and structural integrity of magnesium and its alloys are discussed. These alloys are less dense and beneficial structural alloys for improved energy efficiency, eco-friendliness and driver of circular economic model for sustainable design and innovative ecosystem. While the application of Mg-alloys is projected to increase, understanding the mechanical behaviour and structural integrity of welded joints are critical. Thus, fusion and solid-state welding processes of these alloys are discussed with emphasis on mechanical characterization. Laser welding is the most effective fusion welding technique for most Mg alloys whereas, the predominant solid-state method is friction stir welding. The importance of process variables such as heat inputs, welding velocity (speed) and post weld treatments on the microstructural evolution, on mechanical and physical properties of the distinct zones of the weld joints are described. The weldment is the most susceptible to failure due to phase transformation, defects such as microporosity and relatively coarse grain sizes after solidification. The implication of the design of quality weld joints of Mg alloys are explored with areas for future research directions briefly discussed.
Powder metallurgy (PM) technology is an ideal manufacturing process to produce near net shape parts i.e. part that requires little or no machining, examples of PM processes are spark plasma sintering, isostatic pressing and additive manufacturing. PM allows maximisation of materials and produces part with optimised mechanical and physical properties. Also, PM process provides the possibility to further increase the industrial use of PM parts by fabricating it into complex geometrical shapes via joining. Joining is the most important mechanical process necessary for PM parts to perform in actual service conditions expected in automobile parts and structural parts. Despite apparent advantages of PM processes, joining PM parts has been a tedious process, due to challenges associated with inherent characteristics, like porosity, chemical composition and impurities like oil or grease, which tend to impair the weldments property. In this document, a review of PM process is presented, focusing on different welding methods that can be used to effectively join PM components.
Thermo-mechanical processing of refractory high entropy alloys (RHEAs) at high temperatures is very important. It is an effective method of modifying the microstructure, properties, and shaping into final components after casting. Using the Scopus database, 57 articles relating to the hot deformation of refractory high entropy alloys were extracted from 2011 to 2022. Despite the limited number of articles on hot deformation of RHEAs, it is important to find out if the dominant softening mechanisms reported in other metallic alloys are evident. This is the main impetus for this study since the hot deformation behavior has not been comprehensively studied. All the probable mechanisms influencing deformation in metallic alloys, such as work hardening, dynamic recrystallization, and dynamic recovery, have also been observed in RHEAs. The bulging phenomenon, serrated grain boundaries, and necklace-like structures reported in metallic alloys have also been detected in hot deformed RHEAs. Unsafe deformation behavior such as cracks that have been reported in metallic alloys, have also been observed in RHEAs. This review has provided a comprehensive study on the hot working processes of RHEAs and highlighted critical gaps for future research direction with some suggested limitations.
24 January 2020 in Metallography, Microstructure, and Analysis
Se investigó el comportamiento del flujo de esfuerzo por compresión y las microestructuras de los compuestos de matriz de aleación de Al deformada en caliente (AMC) y reforzados con partículas de la aleación con memoria de forma (SMA) basadas en CuZnAlNi. La aleación base Al-Mg-Si reforzada con 4, 6 y 8% en peso de Cu-18Zn-7Al-0,3Ni, y 8% en peso de partículas de SiC, se obtuvieron mediante agitación doble y se sometieron a pruebas de compresión en caliente a una velocidad de deformación de 1,0 s−1, temperatura de 400 °C, y ~60% de deformación global constante, para ello se utilizó un simulador termo-mecánico Gleeble 3500. Las microestructuras iniciales y deformadas de los compuestos se examinaron utilizando microscopía óptica. El uso de partículas Cu-18Zn-7Al-0,3Ni como refuerzo dio como resultado el desarrollo de una estructura de matriz más fina en comparación con el SiC. La tensión de flujo y la dureza de los AMC reforzados con partículas de Cu-18Zn-7Al-0,3Ni fueron generalmente más altos que los de la aleación de Al no reforzada y la aleación de Al reforzada con SiC. También la tensión de flujo y, en gran medida, la dureza creció con el aumento en el porcentaje en peso de partículas de Cu-18Zn-7Al-0,3Ni en el AMC. La mejora observada con el uso de partículas de la aleación Cu-18Zn-7Al-0,3Ni se atribuyó a la combinación del refuerzo mejorado y el refinamiento del tamaño grano de la matriz, fortalecimiento la interface, el esfuerzo residual de compresión, la alta conductividad térmica, y la capacidad de amortiguación ofrecida por la aleación Cu-18Zn-7Al-0,3Ni.
The high‐temperature deformation behavior of an equiatomic TiNbTaVW refractory high entropy alloy (RHEA) was studied at temperatures of 950, 1000, and 1050 °C and a strain rate of 10 −3 s −1 . The flow stress, high‐temperature strength, and softening mechanisms were analyzed and compared with the IN718 nickel‐based superalloy. The results indicate that the flow stress of both TiNbTaVW and IN718 is sensitive to deformation temperature, with high temperatures resulting in reduced flow stress. Globular grains and elongated grains were observed at 950 and 1000 °C for TiNbTaVW, signifying both dynamic recovery and dynamic globularization as the softening mechanisms. Globular grains were only observed at 1050 °C for TiNbTaVW, signifying dynamic globularization as the softening mechanism. The TiNbTaVW RHEA has a higher temperature strength of 910, 870, and 658 MPa compared to the IN718 alloy with 72, 87, and 61 MPa at 950–1000 °C/10 −3 s −1 . By demonstrating comparable or superior performance in specific aspects, RHEAs can be considered in the near future for potential applications traditionally dominated by nickel‐based superalloys.