Thermo-mechanical processing of refractory high entropy alloys (RHEAs) at high temperatures is very important. It is an effective method of modifying the microstructure, properties, and shaping into final components after casting. Using the Scopus database, 57 articles relating to the hot deformation of refractory high entropy alloys were extracted from 2011 to 2022. Despite the limited number of articles on hot deformation of RHEAs, it is important to find out if the dominant softening mechanisms reported in other metallic alloys are evident. This is the main impetus for this study since the hot deformation behavior has not been comprehensively studied. All the probable mechanisms influencing deformation in metallic alloys, such as work hardening, dynamic recrystallization, and dynamic recovery, have also been observed in RHEAs. The bulging phenomenon, serrated grain boundaries, and necklace-like structures reported in metallic alloys have also been detected in hot deformed RHEAs. Unsafe deformation behavior such as cracks that have been reported in metallic alloys, have also been observed in RHEAs. This review has provided a comprehensive study on the hot working processes of RHEAs and highlighted critical gaps for future research direction with some suggested limitations.
Additive manufacturing (AM) technologies and advances made globally in medicine, construction, aerospace, and energy sectors are discussed. The paper further explores the current state of AM innovation and development landscape in Africa as a late comer to this area of smart manufacturing. Peer-reviewed and published literature were retrieved from Scopus database from 2005 to 2021 and analysed. In Africa, out of 500 published articles, South Africa has the highest research throughput, whereas about two-thirds of the continent is not actively participating in this burgeoning field. The main AM techniques most widely used are selective laser melting, fused deposition modelling, and direct energy deposition. Globally, there is an interplay of computational (machine learning and mechanistic models) and experimental approaches to understanding the physical metallurgy of AM techniques and processes. Though this trend is consistent with global practices, Africa lags the world in AM technologies, a niche that could leapfrog the manufacturing sector. Thus, Africa need to foster collaborative partnership within and globally to become an active global player in this industry.
The high‐temperature deformation behavior of an equiatomic TiNbTaVW refractory high entropy alloy (RHEA) was studied at temperatures of 950, 1000, and 1050 °C and a strain rate of 10 −3 s −1 . The flow stress, high‐temperature strength, and softening mechanisms were analyzed and compared with the IN718 nickel‐based superalloy. The results indicate that the flow stress of both TiNbTaVW and IN718 is sensitive to deformation temperature, with high temperatures resulting in reduced flow stress. Globular grains and elongated grains were observed at 950 and 1000 °C for TiNbTaVW, signifying both dynamic recovery and dynamic globularization as the softening mechanisms. Globular grains were only observed at 1050 °C for TiNbTaVW, signifying dynamic globularization as the softening mechanism. The TiNbTaVW RHEA has a higher temperature strength of 910, 870, and 658 MPa compared to the IN718 alloy with 72, 87, and 61 MPa at 950–1000 °C/10 −3 s −1 . By demonstrating comparable or superior performance in specific aspects, RHEAs can be considered in the near future for potential applications traditionally dominated by nickel‐based superalloys.
31 May 2023 in Journal of Applied Research in Technology & Engineering
The Nigerian garment industry has significantly contributed to the Gross Domestic Product of the country. However, this multibillion naira, small and medium scale enterprises have a higher potential to generate huge revenue, provided lean manufacturing concepts are adopted. In this study, the awareness level and the adoption of lean concepts were assessed using a survey technique. In the survey, 40 complete responses were received by administering 60 copies of a structured questionnaire based on five-point Likert scale. By analyzing the responses using descriptive statistics and mean item score, it was deduced that teamwork is the most predominant lean concept that is currently been practiced in the South-Western Nigeria garment industry with the highest mean score of 3.63. Just-in-time supply, workforce commitment, daily schedule and product design have witnessed the influence of the implementation of lean practices. In the garment industry, the practice of the few lean concepts resulted in a significant improvement in the quality of the garments produced. However, a lack of understanding on how to implement the lean concepts has been a major barrier in this industry. Hence, comprehensive trainings, seminars and workshops for the key players in the industry are proposed to increase the knowledge and adoption of lean concepts.
The complex demands on contemporary engineering components have led to the development of advanced materials, such as functionally graded materials. A functionally graded material, P91 and 304 stainless steels (SS), were developed by WAAM and afterwards, post-processing method of thermomechanical processing is adopted. The primary objective of this approach is to enhance interfacial bonding and microstructural control between distinct base metals. The thermomechanical processing encompassed isothermal compression testing at varying deformation temperatures (800, 900, and 1000°C) and strain rates (1 and 10 s–1). The corrosion performance of the as-built bimetallic component was compared with that of the base metals, P91 and 304 SS, by evaluating their electrochemical behaviour in a 3.5 wt% NaCl solution. Hardness results after deformation confirmed microstructural refinement, as evidenced by increasing hardness due to thermomechanical processing parameters. The corrosion results indicated that the thermomechanical processing parameters improved corrosion resistance due to the refined microstructure in the bimetallic component. Uniform corrosion dominated in the as-built condition of the bimetallic component, while pitting corrosion dominated under deformation conditions.
17 August 2025 in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
Laser cladding offers enhanced mechanical and microstructural properties in rail crossings, thereby improving the surface characteristics required for high-speed and heavy-haul rail transportation. In this study, the Inconel 625 and 718 powders were deposited on Hadfield steel to evaluate the microstructural, hardness, and wear properties. The laser-cladded Inconel 625 and 718 showed a strong metallurgical bond at the substrate-clad interface. Columnar and equiaxed dendritic microstructure was observed in the clads. The average microhardness of Inconel 625 and 718 clads was 269 HV and 243 HV, respectively. The Inconel 718 clad had a lower wear rate of 2.31 × 10 −3 mm 3 /Nm compared to the Inconel 625 samples at 2.46 × 10 −3 mm 3 /Nm. Based on these findings, Inconel 625 and 718 are promising deposition materials for repairing rail crossings by laser cladding.