1 October 2010 in Acta Astronautica
6 August 2018 in Journal of Physics D: Applied Physics
N 2 dissociation in pure nitrogen plasma has a long history of research. It seems to be a complex process which comprises many reactions involving various electronic and vibrational nitrogen states whose contributions can vary depending on conditions. In this paper, we studied N 2 dissociation in the stationary N 2 discharge both experimentally and theoretically. We used a DC glow discharge in a quartz tube in pure N 2 at moderate pressures (5–50 Torr). The degree of dissociation, atomic nitrogen loss rate and gas temperature were measured by applying optical emission spectroscopy (OES) and as a result an ‘effective’ rate constant for nitrogen dissociation was obtained across a wide range of the reduced field E / N . The analysis of N 2 dissociation was carried out using a specially developed 1D radial self-consistent model which takes into account the spatial inhomogeneities of species concentrations, E / N , electron energy distribution function, T gas etc, together with fairly complete plasma-chemical kinetics and all the cross-sections known to date for electron kinetics. The model was successfully validated through the experimental results obtained for electric field, gas temperature and N atom density. Comprehensive analysis of closely coupled processes in nitrogen plasmas—gas heating, VDF formation and N 2 dissociation—was carried out. Simulations reproduced the experimental data on well and allowed us to evaluate the different contributions of the various dissociation channels considered. It was shown that the nitrogen dissociation mechanism in the stationary N 2 discharge is provided by direct electron impact via the excitation of the pre-dissociative states from the vibrationally excited nitrogen molecules N 2 ( X , υ ). The upper limit for the rate constant of the processes N 2 (A) + N 2 (14 ⩽ υ ⩽ 19) → N + N + N 2 was estimated to be 5 · 10 −14 cm 3 s −1 .
1 June 2022 in Plasma Sources Science and Technology
We present a detailed study of the density and kinetics of O 2 (b 1 Σ g + ) in steady-state and partially-modulated DC positive column discharges in pure O 2 for gas pressures of 0.3–10 Torr and 10–40 mA current. The time-resolved density of O 2 (b 1 Σ g + ) was determined by absolutely-calibrated optical emission spectroscopy (OES) of the A-band emission at 762 nm. Additionally, the O 2 (b 1 Σ g + ) density was determined by VUV absorption spectroscopy using the Fourier-transform spectrometer at the DESIRS beamline at Synchrotron Soleil, allowing the absolute calibration of OES to be confirmed. The O( 3 P) atoms were detected by time-resolved sub-Doppler cavity ringdown spectroscopy (CRDS) using the O( 3 P 2 ) → O( 1 D 2 ) transition at 630 nm. The CRDS measurements were synchronized to the discharge modulation allowing the O( 3 P) dynamics to be observed. As a function of gas pressure the O 2 (b 1 Σ g + ) density passes through a maximum at about 2 Torr. Below this maximum, the O 2 (b 1 Σ g + ) density increases with discharge current, whereas above this maximum it decreases with current. The gas temperature increases with pressure and current, from 300 to 800 K. These observations can only be explained by the existence of fast quenching process of O 2 (b 1 Σ g + ) by O( 3 P), with a rate that increases strongly with gas temperature, i.e. with a significant energy barrier. The data are interpreted using a 1D self-consistent model of the O 2 discharge. The best fit of this model to all experimental data (including the O 2 (b 1 Σ g + ) average density as a function of pressure and current, the radial profiles, and the temporal response to current modulation) is achieved using a rate constant of k Q = 10 −10 exp(−3700/ T ) cm 3 s −1 .
1 October 2012 in Combustion Science and Technology
Influence of electron excited singlet delta oxygen (SDO) molecules produced in direct current (DC) glow discharged plasma on the induction length decrease in the H2–O2 mixture has been studied via comprehensive two-dimensional (2D) numerical simulations. The sensitivity analysis of the induction length on SDO mole fractions and residual mole fractions of odd oxygen was carried out. The influence of the reaction H2 + O2(1Δg) → H + HO2 on the ignition length was found to be negligible due to the presence of residual odd oxygen in the oxidizer flow. Two stages specify the ignition time decrease for the studied conditions: (1) chain initiation in reactions with residual odd oxygen and (2) the following chain-branching enhancement due to reaction H + O2(1Δg) → O + OH. The last reaction is the key process for studied conditions when the concentration of SDO exceeds 4%. The estimated rate constant of this reaction was found to be about 2.5 · 10−13 cm3/s at 780 K. The quenching reaction H + O2(1Δg) → H + O2 does not affect the ignition length.
1 September 2023 in Plasma Sources Science and Technology
The chemical kinetics of oxygen atoms and ozone molecules were investigated in a fully-modulated DC discharge in pure oxygen gas in a borosilicate glass tube, using cavity ringdown spectroscopy (CRDS) of the optically forbidden O(3P2)→O(1D2) absorption at 630 nm. Measurements were made over a range of tube temperatures (10 °C and 50 °C) gas pressures (0.5–4 Torr) and discharge current (10–40 mA). The discharge current was square-wave modulated (on for 0.2 s and off for 1 s), allowing the build-up to steady-state and the decay in the afterglow to be studied. This paper focusses on the afterglow period. The O atom density decays non-exponentially in the afterglow, indicating a surface loss probability dependent on incident active particle fluxes. The oxygen atom absorption peak lies on a time-varying absorption continuum due (in the afterglow) to the Chappuis bands of ozone. The ozone density passes through a maximum a few 100 ms into the afterglow, then decays slowly. An existing time-resolved self-consistent 1D radial model of O2 positive column discharges was modified to interpret the new results. The ozone behaviour in the afterglow can only be modelled by the inclusion of: (1) surface production of O3 from the reaction of O2 molecules with adsorbed O atoms, (2) reactions of vibrationally-excited ozone with O atoms and with O2(a1Δg) molecules, and (3) surface loss of ozone with a probability of around 10−5.
1 February 2023 in Plasma Sources Science and Technology
This work focuses on the comparison between a zero-dimensional (0D) global model (LoKI) and a one-dimensional (1D) radial fluid model for the positive column of oxygen DC glow discharges in a tube of 1 cm inner radius at pressures between 0.5 Torr and 10 Torr. The data used in the two models are the same, so that the difference between the models is reduced to dimensionality. A good agreement is found between the two models on the main discharge parameters (gas temperature, electron density, reduced electric field and dissociation fraction), with relative differences below 5%. The agreement on other species average number densities, charged and neutral, is slightly worse, with relative differences increasing with pressure from 11% at 0.5 Torr to 57% at 10 Torr. The success of the 0D global model in describing these plasmas through volume averaged quantities decreases with pressure, due to pressure-driven narrowing of radial profiles. Hence, in the studied conditions, we recommend the use of volume-averaged models only in the pressure range up to 10 Torr.