10 February 2021 in Nano Express
Carbon doped two-dimensional (2D) hexagonal boron nitride nanosheets (BNNSs) are obtained through a CO2—pulsed laser deposition (CO2—PLD) technique on silicon dioxide (SiO2) or molybdenum (Mo) substrates, showing - stable hysteresis characteristics over a wide range of temperatures, which makes them a promising candidate for materials based on non-volatile memory devices. This innovative material with electronic properties of n-type characterized in the form of back-to-back Schottky diodes appears to have special features that can enhance the device performance and data retention due to its functional properties, thermal-mechanical stability, and its relation with resistive switching phenomena. It can also be used to eliminate sneak current in resistive random-access memory devices in a crossbar array. In this sense constitutes a good alternative to design two series of resistance-switching Schottky barrier models in the gold/BNNS/gold and gold/BNNS/molybdenum structures; thus, symmetrical and non-symmetrical characteristics are shown at low and high bias voltages as indicated by the electrical current-voltage (I–V) curves. On the one hand, the charge recombination caused by thermionic emission does not significantly change the rectification characteristics of the diode, only its hysteresis properties change due to the increase in external voltage in the Schottky junctions. The addition of carbon to BNNSs creates boron vacancies that exhibit partially ionic character, which also helps to enhance its electrical properties at the metal-BNNS-metal interface.
16 March 2026 in Journal of Applied Physics
This study presents the fabrication and characterization of a self-powered ultraviolet (UV) photodetector based on nitrogen-doped graphene quantum dots (N-GQDs) as the active material, integrated into a lateral metal–semiconductor–metal (MSM) device configuration. Here, the N-GQDs were synthesized via the pulsed laser ablation (PLA) method. The as-prepared N-GQDs were investigated through structural, optical, and electrical characterizations, confirming their nitrogen incorporation and high crystallinity, strong ultraviolet absorption and efficient charge transport. A UV photodetector fabricated with as-synthesized N-GQDs exhibits excellent performance under 365 nm illumination, including strong photocurrent (61.25 μA) with negligible dark current (1.7 μA) at +1 V, high responsivity (0.25 A/W), detectivity (1.05 × 1011 Jones), and external quantum efficiency (84%). Transient measurements reveal rise (264 ms) and decay (293 ms) times with stable, repeatable operation at zero bias voltage, confirming self-powered capability. This study demonstrates the promising use of N-GQDs as a key material for self-powered UV photodetectors, opening new avenues for next generation flexible, low cost, and energy-efficient optoelectronic devices. Further improvements in device optimization and integration with other materials can enhance performance and broaden the scope of applications, including wearable electronics, environmental monitoring, and security systems.
20 April 2026 in Applied Physics Letters
NPNetzahualcoyotl Palomera
+4
Here, we report a self-powered metal–semiconductor–metal ultraviolet (UV) photodetector based on a compact ZnO thin film deposited by direct current magnetron sputtering onto a p-type silicon substrate. Unlike widely studied nanowires or nanoparticle films, the sputtered ZnO thin film forms a continuous and densely packed network of nanoflakes that enhances light absorption and charge transport. The resulting device exhibits rectifying characteristics of Schottky contacts and achieves excellent zero-bias performance, including a high responsivity of 0.68 A/W, a detectivity of 2.1 × 1012 Jones, an external quantum efficiency of 2.32 × 102%, and a fast transient photocurrent with rise and decay times of 68 ms and 138 ms, respectively, under 365 nm irradiation at 2.8 mW/cm2. These results highlight the potential of sputtered ZnO nanoflake thin films as an industrially compatible platform for cost-effective, high-speed, self-powered UV photodetectors.