27 February 2019 in Energy & Environmental Science
The efficient partial oxidation of hydrocarbons to valuable chemicals without formation of CO2 is one of the great challenges in heterogeneous catalysis. The ever-decreasing cost of renewable electricity and the superior control over reactivity qualify electrochemistry as a particularly attractive means of addressing this challenge. Yet, to date, little is known about the factors regulating hydrocarbon oxidation at the atomic level. A relevant showcase reaction is propene electro-oxidation to key industrial commodity chemicals, such as acrolein, acrylic acid and propylene oxide. In this study, we investigate the partial electrochemical oxidation of propene on high-surface area Pd electrodes using a combination of electrochemical measurements, advanced product characterization and theoretical modeling. We report a new reaction product, propylene glycol, and high selectivity towards acrolein. We further identify key reaction intermediates and propose a mechanism dictated by the surface coverage of organic species formed in situ, where stable reactant adsorption at low coverage determines the selectivity towards allylic oxidation at high coverage. Our fundamental findings enable advances in partial hydrocarbon oxidation reactions by highlighting atomic surface structuring as the key to selective and versatile electrochemical catalyst design.
2 November 2023 in ACS Catalysis
Li-mediated ammonia synthesis is, thus far, the only electrochemical method for heterogeneous decentralized ammonia production. The unique selectivity of the solid electrode provides an alternative to one of the largest heterogeneous thermal catalytic processes. However, it is burdened with intrinsic energy losses, operating at a Li plating potential. In this work, we survey the periodic table to understand the fundamental features that make Li stand out. Through density functional theory calculations and experimentation on chemistries analogous to lithium (e.g., Na, Mg, Ca), we find that lithium is unique in several ways. It combines a stable nitride that readily decomposes to ammonia with an ideal solid electrolyte interphase, balancing reagents at the reactive interface. We propose descriptors based on simulated formation and binding energies of key intermediates and further on hard and soft acids and bases (HSAB principle) to generalize such features. The survey will help the community toward electrochemical systems beyond Li for nitrogen fixation.
22 February 2021 in Catalysis Science & Technology
Controlled electrochemical oxidation of hydrocarbons to desired products is an attractive approach in catalysis. Here we study the electrochemical propene oxidation under operando conditions using Pd L-edge X-ray absorption spectroscopy (XAS) as a sensitive probe to elucidate surface processes occurring during catalysis. Together with ab initio multiple-scattering calculations, our XAS results enable assignment of characteristic changes of the Pd L-edge intensity and energy position in terms of a mechanistic understanding of the selective oxidation of propene. The results, supported by electrochemical density functional theory DFT simulations, show that in the potential range of 0.8–1.0 V vs. the reversible hydrogen electrode (RHE), selective oxidation of propene to acrolein and acrylic acid occurs on the metallic Pd surface. These reactions are proposed to proceed via the Langmuir–Hinshelwood mechanism. In contrast, for the potential range of 1.1–1.3 V vs. RHE, selective oxidation of propene to propylene glycol takes place on a Pd oxide surface.
11 December 2017 in Fuel Cells
Biogas is a valuable energy source and will be available in future in systems relying on renewables. It is an attractive fuel for solid oxide fuel cells (SOFC), which are able to utilize the carbon contained in the biogas and which produce electricity with high efficiency. In the current paper, state‐of‐the‐art SOFCs were studied regarding performance and durability in relation to biogas as fuel and considering important contaminants, specifically sulfur. First, the catalytic behavior in relevant synthetic biogas mixtures was studied and the potential of dry reforming was demonstrated. Successful long term operation of an SOFC under both, conditions of steam and dry reforming, i.e., addition of steam or CO2 to avoid carbon formation was shown. For the steam reforming case a remarkable period of 3,500 h, hereof 3,000 h in the presence of H2S was achieved. Finally, a real biogas from a landfill gas unit was used as fuel. The concept of dry reforming was realized. The SOFC was successfully operated with and in one case even without a specific gas cleaning unit.
10 August 2025 in Journal of the American Chemical Society
Although the Haber-Bosch process for industrial ammonia production is hailed by many as one of the most influential breakthroughs of the 20th century, its decarbonization and decentralization remain a critical challenge. One of the most promising and fast improving approaches is electrochemical nitrogen reduction mediated by lithium. However, the impact of electrolyte configuration on the formation of the solid electrolyte interphase (SEI) and its effect on selective nitrogen reduction is still elusive. In particular, the role of commonly added, supposedly sacrificial, proton donors on SEI chemistry and morphology remains a mystery. In this work, the impact of ethanol concentration in a 1 M LiNTf2 in THF electrolyte on SEI properties and nitrogen reduction is analyzed via a multipronged characterization approach. Post-mortem surface analysis via X-ray photoelectron spectroscopy shows a dependence in the relative proportion of LiF and Li2O on ethanol concentration, while depth profiling measurements via cluster source time-of-flight secondary ion mass spectrometry reveal increasing SEI electrolyte permeability at higher ethanol concentrations. Cryogenic electron microscopy measurements show a reduction in SEI thickness with increased ethanol concentration, as well as increased SEI homogeneity. Lithium metal is also observed only in the ethanol-free condition. Analysis of bulk SEI components via titration corroborates the observation of lithium metal in cryo-microscopy measurements, as well as showing an increase in bulk Li2-xOHx content with ethanol concentration. A narrow 'Goldilocks' region is revealed, where the SEI has just the right properties for efficient nitrogen reduction.
10 December 2020 in ChemElectroChem
A major challenge in the electrochemical oxidation of hydrocarbons is understanding the formation of intermediate species, some of which continue to react, while others are non‐reactive or poisonous species that block adsorption of further reactants. Herein we investigate the identity and behavior of adsorbates formed during partial oxidation of propene. We employ two techniques: Electrochemistry‐Mass Spectrometry (EC‐MS) and Attenuated Total Reflection Infrared Spectroscopy (ATR‐FTIR). In both cases, we use CO as a probe molecule, to perturb the ad‐layer of propene intermediates. In the EC‐MS experiments, propene and its intermediates were quantified by triggering their desorption via displacement with CO. We show evidence for at least two distinct classes of propene adsorbates, via CO displacement and electrochemical stripping. A redshift in the ν(C−O) mode was observed, during IR spectroscopy, reflecting the chemical environment arising from strongly bound propene intermediates.