12 June 2020 in ACS Applied Polymer Materials
3 December 2021 in ACS Omega
Nowadays, hybrid polymer/metal assemblies experience a growing demand in the industry, especially for transports and biomedical purposes. Those assemblies offer many advantages, such as lightweight structures and corrosion resistance. The main difficulty to assemble them remains. In this sense, laser welding is more than a promising technique because of its rapidity, the absence of intermediate materials, and its high design freedom. Unfortunately, several fundamental aspects are not well understood yet, as the chemical bonding at the interface. For this work, common materials are studied: polyamide-6.6 and aluminum. A previous published work strongly suggests the formation of a C–O–Al bond at the interface, but this information needs to be confirmed and the reaction mechanism is still uncertain. To achieve this goal, two different model samples were prepared. The first ones are spin-coated layers of polyamide-6.6 on mirror polished aluminum; the other samples are made of a layer of N-methylformamide mimicking the reactive part of the polymer, dip-coated on aluminum. Both sample types were analyzed with XPS and ToF-SIMS and display similar results: C–O–Al bond formation at the interface is confirmed and a reaction mechanism is proposed.
1 January 2018 in Procedia CIRP
14 March 2020 in The International Journal of Advanced Manufacturing Technology
6 May 2026 in Surface and Interface Analysis
Surface morphology, that is, roughness and molecular arrangement, is known to have an impact on secondary ion mass spectra. The present study examines this issue using nanoprojectile secondary ion mass spectrometry (NP‐SIMS). NP‐SIMS involves bombarding the analyte with individual nanoparticles resolved in space and time and recording the secondary ions (SIs) from each impact individually. The ejecta from an impact originates from a crater of 10–15 nm in diameter and up to 10 nm in depth. Thus, topography can be tested in the x ‐ y plane with 10 to 15 nm lateral resolution. Importantly, the ejecta from these dimensions must be from colocalized moieties. The experiments were run on a custom‐built ToF‐mass spectrometer with a effusion source. projectiles were accelerated to 25 and 50 keV for NP‐SIMS experiments. Detection of the SIs was done with a 64‐anode detector allowing for the spatial distribution of the SIs to be recorded. The model targets were deposits of cholic acid spin‐coated with two different solvents: ethanol and acetone. SEM and AFM were performed to assess the surface topography. The surface spin‐coated by ethanol yielded ellipsoidal structures versus porous structures for the ones obtained with acetone. These different morphologies result in differences visible in all aspects of the acquired spectra: mass resolution, secondary ion distribution, ion yields, ion coemission, and secondary ion spatial distribution. These findings demonstrate the potential of NP‐SIMS for high‐resolution surface analysis and tailored surface preparation.