1 January 2024 in IEEE Transactions on Neural Systems and Rehabilitation Engineering
This study presents the biomimetic design of the structure and controller of AutoLEE-II, a self-balancing exoskeleton developed to assist patients in performing multiple rehabilitation movements without crutches or other supporting equipment. Its structural design is founded upon the human body structure, with an eliminated axis deviation and a raised CoM of the exoskeleton. The controller is a physical parameter-independent controller based on the CoM modification. Thus, the exoskeleton can adapt to patients with different physical parameters. Five subjects underwent exoskeleton-assisted rehabilitation training experiments, including squatting, tilting, and walking trainings. The results showed that the exoskeleton can assist patients in completing various rehabilitation exercises and help them maintain their balance during the rehabilitation training. This helpful role of the exoskeleton in rehabilitation training is analyzed through an electromyography (EMG) data analysis. The findings revealed that wearing the exoskeleton can reduce the activity of the lower limb muscles by approximately 20–30% when performing the same rehabilitation exercises.
20 April 2023 in IEEE Transactions on Neural Systems and Rehabilitation Engineering
A large number of the WRLSs (wearable robots lumbar support) research have been presented for working efficient increase and injure risk reduction in recent years. However, the previous research can only complete the sagittal-plane lifting task, which can not adapt to the mixed lifting tasks in the actual work scene. Therefore, we presented a novel lumbar assisted exoskeleton with mixed lifting tasks by various postures based on position control, which can not only carry out the lifting tasks of sagittal-plane, but also complete the lifting tasks of sides. First, we proposed a new generation method of raising reference curves that can generate assistance curve for each user with each task, which is very convenient in mixed lifting tasks. Then, an adaptive predictive controller was designed to track the reference curves of different users under different loads, the maximum tracking errors of the angles are 2.2° and 3.3° respectively at 5kg and 15kg, and all the errors are within 3%. Compared to the condition of no exoskeleton, the average RMS (root mean square) of EMG (electromyography) for six muscles are reduced by 10.33 ± 1.44%, 9.62±0.69%, 10.97±0.81% and 14.48±2.11% by lifting loads with stoop, squat, left-asymmetric and right-asymmetric respectively. The results demonstrate that our lumbar assisted exoskeleton presents outperformance in mixed lifting tasks by various postures.
21 December 2017 in Robotics and Biomimetics
Nuclear energy is one of the most important clean energy on earth presently. The steam generator secondary side is the key device of nuclear power station. As an important branch of special robot, nuclear robot is the most convenient and effective mean to inspect the steam generator. This paper describes one robot system which could help users inspecting tubes and locating the robot inside the steam generator. The main part of this system is a climbing robot which can move inside the steam generator carrying a PT or telescopic arm. Four cameras are installed on the robot and PT to send real-time videos back for analysis. Experiments show that this system works stably and the localization is accuracy and effective.
18 February 2025 in IEEE Transactions on Robotics
Assisting underwater movements improves divers' efficiency and reduces the risk of decompression sickness from physical activity. Although exoskeletons have been developed for numerous land-based scenarios, their application in underwater diving remains unexplored. This paper proposes a soft underwater lower-limb exosuit designed to assist three aquatic movements: flutter kick, breaststroke kick, and underwater walk. We presented the mechanical design of the exosuit that is capable of assisting bidirectional leg movements in full kicking/gait cycle, while ensuring natural leg mobility without impeding normal leg function. A cascade force integral controller is also designed to resolve issues related to uncontrollable states and stiffness variations within the system. To verify the assistive performance of the system, experiments were conducted with nine participants to assess how the proposed exosuit aids in reducing metabolic cost across various motion patterns and frequencies. The findings indicate that the underwater exosuit effectively reduces the air consumption rate by $29.77\pm 7.68$% during flutter kick, $25.70\pm 5.99$% during breaststroke kick, and $18.35\pm 4.53$% during underwater walk.
4 September 2024 in IEEE/ASME Transactions on Mechatronics
Unlike conventional lower limb exoskeletons that rely on external devices, the self-balancing exoskeletons enable individuals with diverse mobility impairments to regain the ability to walk. Current self-balancing exoskeletons struggle to balance between interpersonal adaption and compliance. Adjustments to parameters are often required when accommodating different wearers, and dynamic deformations pose significant challenges in the performance of these exoskeletons. This article proposes a control approach of self-balancing lower limb exoskeleton for various wearers under dynamic deformation, which includes two controllers. First, we propose a new informer-based feedforward deformation compensator, which could reduce the average position error and attitude error by 79.04% and 84.95%, respectively. Then, we design a compliance controller based on impedance control that can be applied to different wearers. At last, the self-balancing exoskeleton walking experiments with seven subjects (five male, two female) are conducted. The results reveal that this study achieves stable walking with the self-balancing exoskeleton loaded range from 0 to 73 kg.
1 October 2026 in IEEE/ASME Transactions on Mechatronics
Assisting divers with robotic exoskeletons would increase their working efficiency and reduce the risk of accidents. Nonetheless, the synchronization of assistance with underwater movements has not been investigated and remains a complex issue. Due to the agility and individuality of these movements in aquatic environments, conventional methods utilized on land may not work properly. In this article, we proposed an ultrarobust adaptive oscillator (AO) (URAO) method for predicting the kicking phase for the flutter kick and breaststroke kick, two main underwater motion patterns in diving activity. The URAO works without the need for data collection or training and can adapt to different users, motion patterns, and rapid changes in kicking frequency, offering greater precision than methods previously utilized for land-based exoskeletons. Eight participants were tested while performing fluctuating-frequency flutter and breaststroke kicks in indoor and outdoor swimming pools. The results showed that URAO outperformed both conventional AO and state-of-the-art estimators in predicting underwater kicking phases, reducing RMS_EWS prediction error by up to 49.5% for flutter kicks and up to 44.8% for breaststroke kicks.