The eddy current transducer (ECT) of the transformer type is used to construct a sensor for investigating titanium sheets joined by a welded joint. The characteristics of the ECT are presented. The measurement method for controlling the occurrence of defects in the welded joints in titanium alloys is described. The experimental results obtained by the ECT on two welded titanium sheets are presented. The depth of penetration of the field of eddy currents into the investigated object is determined and the dependences describing the response of the ECT at different depths of the defect are outlined. The relationships can be used for evaluating the quality of welded joints and determining the reliability of welding.
In this paper structure and mechanical properties of Ni3Al intermetallic compound was studied. The materials was fabricated according to different schemes, which combined mechanical alloying of Ni and Al powders, self-propagating high temperature synthesis (SHS) and spark plasma sintering (SPS). Relative density of all sintered samples was ~ 97 %. Microhardness of the sintered materials ranged from 6100 to 6300 MPa. SPS of 86.71 % wt. Ni and 13.29 % wt. Ni powder at 1100 °C led to formation of material with the highest level of tensile strength equal to 400 MPa.
Currently layered composites with intermetallic interlayers are promising materials for many industries. Materials of this type involve composites consisting of titanium and titanium aluminides layers. One of the methods of such composites fabrication is explosive welding and annealing. In this paper the structure and properties of explosively welded multilayered composites is described. Structural studies were carried out by the methods of optical metallography, scanning and transmission electron microscopy. The properties of local zones of material were estimated by the measuring of a microhardness level. The explosive welding process accompanied by the structural changes of material adjacent to “Al-Ti” interfaces. The structural investigation revealed the formation of several areas: vortex zones, which are characterized by aluminum and titanium mixing, and severely deformed areas. These structural features have the strong influence on the diffusion processes occurring during annealing of composites. The most intensive diffusion was observed in the welded joints where the most significant structural changes occurred. It was identified that Al 3 Ti is only one phase which forms during heat treatment of “Ti-Al” composites. The main conditions of “Ti-Al 3 Ti” composites fabrication are the correct choice of aluminum and titanium plates thickness and optimal conditions of heat treatment.
2 November 2015 in Journal of Physics: Conference Series
Based on an eddy-current transducer (ECT), a probe has been designed to study the semiconductor material. The structural diagram of the probe is given and the basic technical data are stated (the number of windings is 10-130 turns, and the value of the initial permeability of the core μ max = 500). Due to the high confinement of the magnetic field, it is possible to acquire data from small areas of semiconductor plates. Response versus ECT positioning diagram is also provided.
The structural features of multilayered "metal - intermetallic" composite materials based on nickel and aluminum, obtained by SPS method have been investigated in this paper. The effect of sintering temperature on phase composition of the intermetallic layers was studied. The influence of intermetallic layers phase composition on the mechanical properties of the composites was estimated.