1 January 2014 in Advanced Materials Research
The paper puts forward a modified eddy current testing method based on the use of miniature eddy current transducers within a localized controlled area of the material surface of up to 50 μm2. Measurement results are provided for a model composite material made up of alternating conducting and dielectric layers of system Al-HDPE-Al. Structural flaws are specified as changes in the number and position of layers in the sequence. Prospects of the proposed method and a measuring device operating on its basis for flaw detection in composite aluminum alloy materials are shown.
12 November 2014 in Instruments and Experimental Techniques
Based on a transformer eddy current transducer (ECT), a probe has been designed to study metal-dielectric-metal structures. The structural diagram of the probe is given and the basic technical data are stated (the number of windings is 10–130 turns, and the value of the initial permeability of the core μmax = 500). The scheme that uses the computer as a generator and receiver of signals from windings is considered. The measurement procedure allowing one to detect defects in laminate composites with a high accuracy is described. The transducer was tested on the layered structure consisting of paper and aluminum layers with a thickness of 100 μm each in which the model defect was placed. The dependences of the ECT signal on the defect in this structure are given.
20 January 2015 in IOP Conference Series: Materials Science and Engineering
2 November 2015 in Journal of Physics: Conference Series
Based on an eddy-current transducer (ECT), a probe has been designed to study the semiconductor material. The structural diagram of the probe is given and the basic technical data are stated (the number of windings is 10-130 turns, and the value of the initial permeability of the core μ max = 500). Due to the high confinement of the magnetic field, it is possible to acquire data from small areas of semiconductor plates. Response versus ECT positioning diagram is also provided.
1 December 2019 in Journal of Physics: Conference Series
Strengthening of machine parts and units, increased reliability and longer service life is an important task of modern industry. As promising materials for protective-strengthening coatings, matrix composites based on the ternary system Fe-B-FenB are offered. The article proposes the complex heating of steel being borated and imbued medium by high frequency currents (HFC). We also proposed to combine the diffusion boriding from liquid and solid media and the transition of the diffusion boriding to chemical interaction between the elements of Fe and B. We determined the main components of the reaction-boronizing system, as well as their roles and possible processes that lead to the implementation of topochemical boriding initiated by HFC-heating. We confirmed the course of the reaction leading to the occurrence of reducing agents Ca, Si and active boron in the boronizing mixture.
23 May 2017 in MATEC Web of Conferences
MATEC Web of Conferences, open access proceedings in Materials science, Engineering and Chemistry