28 June 2022 in IEEE Transactions on Intelligent Vehicles
Recent advances in attack/anomaly detection and resilience strategies for connected and automated vehicles (CAVs) are reviewed from vehicle dynamics and control perspective. Compared to traditional vehicles, CAVs are featured in the increasing number of perception sensors, advanced intra-vehicle communication technologies, capabilities of driving automation and connectivity between single vehicles. These features bring about safety issues which are not encountered in traditional vehicle systems. One main type of these issues is the attack or anomaly launched onto the perception sensors and the communication channels. With such a consideration, this survey summarizes and reviews the existing results on attack/anomaly detection and resilience of CAVs in control frameworks. This paper reviews the results according to the positions at which the attacks/anomalies occur. These positions are divided into three categories, namely, intra-vehicle communication network, perception sensors and inter-vehicle communication network. From this perspective, the recent attack/anomaly detection and resilience results are reviewed according to different positions attacked. After reviewing existing results, some potential research directions and challenges are identified.
1 September 2020 in IEEE Transactions on Vehicular Technology
This paper deals with the speed synchronization control of a connected vehicle subject to a denial of service (DOS) attack. Integrated motor-transmission (IMT) powertrain system is a common transmission structure for electric vehicles. However, a connected electric vehicle equipped with an IMT system may subject to attacks from external networks and DOS attack is a typical form of network attacks. The phenomenon of DOS attack would induce in-vehicle delays which would reduce the performance of the speed synchronization control system and even make the control system invalid. To address this problem, a dynamic robust reset speed synchronization controller satisfying energy-to-peak performance is designed in this paper. The impact of a DOS attack on the control system is described by large network delays which are modeled by polytopic inclusions using Taylor series expansion. In addition, a dynamic linear parameter varying (LPV) tracking system under discrete-time framework considering the uncertain network delays is established. Furthermore, a dynamic output feedback controller satisfying energy-to-peak performance is proposed for online step tracking and a robust reset controller considering model uncertainty is designed to improve the transient response of dynamic controller. The after-reset value calculated by linear matrix inequality (LMI) will replace the dynamic controller states if the reset condition is triggered. Finally, we evaluate the proposed controller performance by some experiments compared with a conventional proportional-integral (PI) controller as well as an energy-to-peak robust controller.
13 February 2024 in IEEE Transactions on Intelligent Vehicles
This paper addresses the lateral and longitudinal control problem for vehicle platoons subject to multiple communication delays. The essential lateral control problem and different delays in search-based routes of the vehicular ad-hoc networks (VANET) are introduced to vehicle platoon control. We first design an objective-based decoupled lateral and longitudinal control framework for vehicle platoons. With the Frenet coordinate system, a robust controller for lateral control is established to ensure each follower vehicle tracks the desired path and remain within the platoon. For the longitudinal control, the longitudinal error dynamic of vehicle- $ i$ with a specific interacted vehicle- $ j$ is modeled. Furthermore, with an unknown interaction topology, the error dynamic is augmented as multiple low-dimensional subsystems instead of an high-dimensional platoon system. To accommodate the communication delays, we design a distributed robust controller based on the Lyapunov-Krasovskii function. In addition, a delay-tolerant controller design theorem is obtained with linear matrix inequalities (LMIs). Simulations are conducted to demonstrate the effectiveness and improvement of the proposed controllers.
28 October 2022 in Nonlinear Dynamics
11 April 2022 in Research Square
In this paper, a delay-tolerable and anti-windup control synthesis technique is proposed. Longitudinal speed tracking performed by an integrated electric drive (IED) system under the multi-domain constraints of network bandwidth and actuator saturation is investigated. An in-vehicle controller area network (CAN) connect to the Internet providing an interface for cyber attacks which exacerbate network congestion. In addition, the physical saturation characteristics of the electric drive motor sacrifice vehicle speed tracking performance. Based on above problems, a nominal controller satisfying energy-to-peak performance considering the attack-induced delays is designed. Then, an augmented closed-loop system is established including the nominal delay-tolerable controller and an anti-windup controller considering input saturation and random attack-induced delays. The nonlinear uncertainty caused by attack-induced delay is described by polytopic inclusion. Furthermore, the saturation non-linearity is convert to sector-bounded uncertainty solved by linear matrix inequalities (LMIs) optimization. Particle swarm optimization (PSO) algorithm is employed to find the optimal anti-windup controller matrices. Finally, the effectiveness and superiority of the proposed method based on Matlab Simulink and hardware-in-the-loop (HiL) test platform are verified. The variation of speed tracking performance and oscillation damping capability under different attack energies is described.