This study investigates the performance of four control strategies—Proportional-Derivative (PD), Feedforward-Feedback PD (FF-FB PD), Linear Quadratic Regulator (LQR), and Feedforward-Feedback LQR (FF-FB LQR)—implemented on a robotic transfemoral prosthesis. The performance metrics, including overshoot, settling time, trajectory tracking accuracy, and torque requirements, were evaluated using simulation models. The results indicate that the FF-FB LQR controller demonstrated superior performance, achieving the lowest overshoot (4.98%) and near-zero trajectory tracking error. All controllers required approximately 8.6 Nm of torque, suggesting consistent energy requirements across strategies despite their performance differences. The LQR controller exhibited the best stability, minimizing overshoot and improving overall system response. These findings highlight the advantages of feedforward-feedback control strategies, particularly the FF-FB LQR, for controlling robotic transfemoral prostheses with enhanced stability and accuracy.
This paper presents the preliminary results of a study on implementing Industry 4.0 in metallurgical factories. It showed that adopting Industry 4.0 technologies generates a productive environment characterized by real-time sensing, with high adaptability, flexibility, self-learning capacity, and fault tolerance. In the context of the Ecuadorian industry, particularly in micro, small, and medium-sized enterprises (MSMEs), there is limited integration of industrial technologies, both at the software and hardware levels. Additionally, many factories do not perceive the relevance of implementing solutions based on Industry 4.0 in key areas such as production, quality control, and maintenance. The study presents three case studies of metalworking factories that emerged as small locksmith workshops and analyzes the challenges related to incorporating new know-how in these industries. The findings concluded that Industry 4.0 has transformative potential for the value chain, facilitating the development of innovative products and services.
With this project, the control of a transfemoral prosthesis was developed by means of a neural network. The mechatronics methodology based on the V-model was used. This document first presents an analysis of the situation of physical-motor disabilities in Ecuador and reviews some prosthesis designs to propose a local solution. The requirements that were proposed, were used as inputs for the development of the conceptual and specific design. The data acquisition system was established to perform the measurements of muscle activity and position by means of an accelerometer. A neural network consisting of a 3-input layer with 12 neurons in the hidden layer and one neuron in the output layer was trained. The output of the network corresponds to the position that the prosthesis must reach, and the developed system has a 20% error in the prediction of the flexion and extension movements of the leg. En el presente proyecto se desarrolló el control de una prótesis transfemoral por medio de una red neuronal. Se utilizó la metodología mecatrónica basada en el modelo en V. Primero se presenta un análisis a la situación de discapacidades físico-motoras de Ecuador y se revisan algunos diseños de prótesis para proponer una solución local. Se plantearon requerimientos que se usaron como insumos para el desarrollo del diseño conceptual y específico. Se estableció el sistema de adquisición de datos para realizar las mediciones de actividad muscular y posición por medio de un acelerómetro. Se entrenó una red neuronal formada de una capa de 3 entradas con 12 neuronas en la capa oculta y una neurona en la capa de salida. La salida de la red corresponde a la posición a la que debe llegar la prótesis, y el sistema desarrollado tiene un error del 20% en la predicción de los movimientos de flexión y extensión de la pierna.
Welding plays a critical role in industrial manufacturing, defects such as cracks, porosity, and incomplete fusion compromise structural integrity. Traditional inspection techniques, including manual assessment and non-destructive testing (NDT), are labor-intensive and prone to human error. This study presents a comparative study on the visual classification of weld bead defects in Shielded Metal Arc Welding (SMAW) using Convolutional Neural Networks (CNNs). The study used two image datasets: one with image preprocessing techniques applied (sharpening, adaptive contrast adjustment, and Gaussian smoothing), and another without any preprocessing. Both datasets were used to train and evaluate a CNN model under controlled laboratory conditions. The results demonstrate that preprocessing improves model performance, increasing accuracy from 91.66% (without filters) to 98.00% (with filters). A detailed comparison with related works highlights the contribution of this approach, which not only achieves competitive accuracy but also introduces a replicable methodology for dataset preparation and analysis.