Daniel Crovo

Daniel Crovo

Auto-generated profile, based on publicly available information

Daniel Crovo

Karlsruhe Institute of Technology

Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 March 2026 in The European Physical Journal C
Verified
Journal Article
Open access
MFM. Folcarelli
M. Folcarelli
DDD. Delicato
D. Delicato
AAA. Acevedo-Rentería
A. Acevedo-Rentería
LAL. E. Ardila-Perez
L. E. Ardila-Perez
LBLaura Bandiera
Laura Bandiera
KZKangkang Zhao
Kangkang Zhao
BULLKID is a cryogenic, solid-state detector designed for direct searches of particle Dark Matter candidates, with mass $$\lesssim 1$$ ≲ 1 GeV/c $$^2$$ 2 , and coherent neutrino-nucleus scattering. It is based on an array of dice carved in 5 mm thick silicon crystal, sensed by phonon-mediated Kinetic Inductance Detectors. In previous works, the array was calibrated with bursts of optical photons, which are absorbed in the first hundreds nanometers of the dice and give rise to surface events. In this work, we present the reconstruction of bulk events through the 59.5 keV $$\gamma $$ γ -ray generated by an $$^{241}$$ 241 Am source, which emulates more closely the interaction of Dark Matter and neutrinos. The peak resolution is $$5\%~(\sigma )$$ 5 % ( σ ) and its position is shifted by less than $$10\%$$ 10 % with respect to the optical calibration. We observe that the resolution is further improved by a factor 2 combining the signal from neighboring dice. These results confirm the performance of the detector in view of the physics goals of the BULLKID-DM experiment for dark matter search.

6 November 2026 in Physical Review D
Verified
Journal Article
Open access
DDD. Delicato
D. Delicato
AAA. Acevedo-Rentería
A. Acevedo-Rentería
MFM. Folcarelli
M. Folcarelli
GCG. Del Castello
G. Del Castello
MCM. Cappelli
M. Cappelli
KZKangkang Zhao
Kangkang Zhao
We present the operation with moderate radiation shield in a surface laboratory of BULky and Low-threshold Kinetic Inductance Detector) (BULLKID), a cryogenic detector for searches of light dark matter or coherent elastic neutrino-nucleus scattering. The detector consists of an array of 60 cubic silicon particle absorbers of 0.34 g each, sensed by cryogenic kinetic inductance detectors. The analysis presented focuses on data from 15 elements of the array, with two central units used to evaluate the background and with their surrounding elements used as veto. The low energy spectrum resulting from an exposure of 290 hours to ambient backgrounds, acquired with the use of external and internal radiation shields, is compatible with the simulations at the level of ( 6.8 ± 0.4 stat . ± 0.1 syst . ) × 10 4 counts / keV kg days from 2 keV down to an energy of 600 eV. The region between 225 eV and 600 eV shows a rise in background in disagreement with the simulations, while not sharing some of the key traits of the low energy excess observed in other cryogenic experiments. The high energy spectrum shape is in overall agreement with the simulations and displays the typical particle-induced x-ray emission of the surrounding lead.

19 January 2026 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
TMTimo Muscheid
Timo Muscheid
DCDaniel Crovo
Daniel Crovo
RGRobert Gartmann
Robert Gartmann
EGEduardo A. Gerlein
Eduardo A. Gerlein
OSOliver Sander
Oliver Sander
LALuis E. Ardila-Perez
Luis E. Ardila-Perez
Simultaneous readout of large-scale cryogenic detector arrays relies on multiplexing schemes such as the Frequency- Division Multiplexing (FDM) with microwave Superconducting Quantum Interference Device (SQUID) multiplexers and highly customized readout electronics. In traditional detector systems, where mixed-signal ASICs are used in detector frontends and typically provide a digital interface, Hardware-in-the- Loop (HIL) testing can be readily implemented by reusing the existing digital logic of the front-end for emulation purposes. Such straightforward emulation is not possible for FDM lowtemperature detectors, where the sensor signal is encoded in a high-frequency microwave carrier via a two-stage modulation scheme depending on the cryogenic resonators and the SQUID response. To address this challenge, we present CryoDE, a digital cryogenic-detector emulator for microwave SQUID multiplexed detector systems. CryoDE generates the encoded detector signals, including realistic pulse responses, enabling full HIL testing of the room-temperature DAQ system without requiring the cryogenic hardware. This resource-efficient FPGA-based detector twin integrates seamlessly into existing DAQ systems and allows experiment-specific adjustment of detector-signal parameters.We describe the internal architecture and capabilities of CryoDE within our custom HIL framework and demonstrate its use in evaluating the performance of real-time signal processing firmware optimized for different microwave SQUID multiplexed cryogenic-detector experiments.

9 February 2026 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
TMT. Muscheid
T. Muscheid
RGR. Gartmann
R. Gartmann
LAL. E. Ardila-Perez
L. E. Ardila-Perez
AAA. Acevedo-Rentería
A. Acevedo-Rentería
LBL. Bandiera
L. Bandiera
KZKangkang Zhao
Kangkang Zhao
The BULLKID-DM experiment aims to detect WIMP-like potential Dark Matter particles with masses below 1 GeV/c$^{2}$. Sensing these particles is challenging, as it requires nuclear recoil detectors characterized by high exposure and an energy threshold in the order of 100 eV, achieved with cryogenic phonon detectors. BULLKID-DM introduces a detector that combines the low energy threshold with a new scalable technology, reaching a total target mass of 800 g. The core detector of the BULLKID-DM experiment is composed of 16 100mm silicon wafers, each segmented in 145 dice for a total of more than 2000 units, each sensed by a Microwave Kinetic Inductance Detector (MKID). The MKIDs on each wafer are coupled to a single transmission line and read using a frequency division multiplexing approach by the room-temperature data acquisition. In this contribution, we describe and assess the design of the room-temperature readout electronics system, including the selected hardware components and the FPGA firmware which contains the real-time signal processing stages for tone generation, frequency demultiplexing, and event triggering. We evaluate the system on the ZCU216 board, a commercial evaluation card built around a Radio-Frequency System-on-Chip (RFSoC) with integrated high-speed DACs and ADCs, and connected it to a custom-designed analog front-end for signal conditioning.

1 May 2026 in Journal of Instrumentation
Verified
Journal Article
Open access
LAL.E. Ardila-Perez
L.E. Ardila-Perez
TMT. Muscheid
T. Muscheid
RGR. Gartmann
R. Gartmann
DCD. Crovo
D. Crovo
ACA. Cruciani
A. Cruciani
MVM. Vignati
M. Vignati
We present the readout and data acquisition (DAQ) system for BULLKID-DM, a cryogenic dark-matter experiment employing Kinetic Inductance Detectors (KIDs) to probe below 1 GeV dark matter candidates. The system is built around an AMD RFSoC (ZCU216) platform that synthesizes densely spaced probe tones, performs frequency demultiplexing and amplitude demodulation, and executes real-time triggering and background suppression across up to 16 readout lines with 145 resonators per line in the 700 MHz to 950 MHz band. A fully automated calibration flow integrates vector-network-analyzer (VNA) functionality, resonator-circle acquisition with in-firmware phase rotation for maximum trigger sensitivity, and an energy calibration scheme based on LED illumination via a mezzanine board on the FMC+ connector. We summarize architecture, firmware, preliminary phase-noise studies, and the status of the detector demonstrator. The system is ready for scale-up to the full BULLKID-DM detector at the Laboratori Nazionali del Gran Sasso (LNGS).