The COSMOS-UK observation network has been providing field-scale soil moisture and hydrometeorological measurements across the UK since 2013. At the time of publication a total of 51 COSMOS-UK sites have been established, each delivering high-temporal resolution data in near-real time. Each site utilizes a cosmic-ray neutron sensor, which counts epithermal neutrons at the land surface. These measurements are used to derive field-scale near-surface soil water content, which can provide unique insight for science, industry, and agriculture by filling a scale gap between localized point soil moisture and large-scale satellite soil moisture datasets. Additional soil physics and meteorological measurements are made by the COSMOS-UK network including precipitation, air temperature, relative humidity, barometric pressure, soil heat flux, wind speed and direction, and components of incoming and outgoing radiation. These near-real-time observational data can be used to improve the performance of hydrological models, validate remote sensing products, improve hydro-meteorological forecasting, and underpin applications across a range of other scientific fields. The most recent version of the COSMOS-UK dataset is publically available at https://doi.org/10.5285/b5c190e4-e35d-40ea-8fbe-598da03a1185 (Stanley et al., 2021).
Cosmic‐Ray Neutron Probes (CRNP) have found application in soil moisture (SM) estimation due to their conveniently large (>100 m) footprints. Here, we explore the possibility of using high‐density polyethylene (HDPE) moderator to limit the field of view, and hence, the footprint of a SM sensor formed of 12 CRNP mounted on to a mobile robotic platform (Thorvald) for better in‐field localization of moisture variation. Ultra Rapid Adaptable Neutron‐Only Simulation neutron scattering simulations are used to show that 5 cm of additional HDPE moderator (used to shield the upper surface and sides of the detector) is sufficient to (a) reduce the footprint of the detector considerably, (b) approximately double the percentage of neutrons detected from within 5 m of the detector, and (c) does not affect the shape of the curve used to convert neutron counts into SM. Simulation and rover measurements for a transect crossing between grass and concrete additionally suggest that (d) SM changes can be sensed over a length scales of tens of meters or less (roughly an order of magnitude smaller than commonly used footprint distances), and (e) the additional moderator does not reduce the detected neutron count rate (and hence increase noise) as much as might be expected given the extent of the additional moderator. The detector with additional HDPE moderator was also used to conduct measurements on a stubble field over three weeks to test the rover system in measuring spatial and temporal SM variation.
The COSMOS-UK observation network has been providing field scale soil moisture and hydrometeorological measurements across the UK since 2013. At the time of publication a total of 51 COSMOS-UK sites have been established, each delivering high temporal resolution data in near-real time. Each site utilises a cosmic-ray neutron sensor, which counts fast neutrons at the land surface. These measurements are used to derive field scale near-surface soil water content, which can provide unique insight for science, industry, and agriculture by filling a scale gap between localised point soil moisture and large-scale satellite soil moisture datasets. Additional soil physics and meteorological measurements are made by the COSMOS-UK network including precipitation, air temperature, relative humidity, barometric pressure, soil heat flux, wind speed and direction, and components of incoming and outgoing radiation. These near-real time observational data can be used to improve the performance of hydrological models, validate remote sensing products, improve hydro-meteorological forecasting and underpin applications across a range of other scientific fields. The most recent version of the COSMOS-UK dataset is publically available at https://doi.org/10.5285/37702a54-b7a4-40ff-b62e-d14b161b69ca (Stanley et al., 2020).
Observational data on soil physical and hydraulic properties are important for improving our understanding of hydrological processes. This is particularly relevant given current interest in the potential of land-based “natural flood management” measures (and related concepts: “nature-based solutions” and “working with natural processes”) to reduce flood risk. Therefore, a detailed survey of seven field sites under different land uses and management practices in the Thames catchment, UK, was undertaken as part of the LANDWISE project. Measurements (n = 1300) included soil surface infiltration rate, saturated hydraulic conductivity, bulk density, estimated porosity, soil moisture, and soil moisture retention. Field sites comprised three arable fields on shallow soils over limestone, two arable fields on free-draining loamy soils over chalk, and permanent grassland and broadleaf woodland on slowly permeable soil over mudstone. Soil sampling points covered infield areas, trafficked areas (e.g. tramlines), and untrafficked margins. Samples were generally taken at five depths ranging from the soil surface to 100 cm below ground level. Soil saturated hydraulic conductivity measurements were made at 25 and 45 cm depths. Soil samples and measurements were taken between April and October 2021, with repeats taken pre- and post-harvest (arable sites). These data provide valuable insight into the hydrological behaviour of soils under contrasting management, including both conventional and innovative agricultural practices (e.g. herbal leys, mob grazing, and controlled traffic). Dataset applications include improving the performance of hydrological and land surface models and validation of remotely sensed soil observations. The dataset is publicly available at https://doi.org/10.5285/a32f775b-34dd-4f31-aafa-f88450eb7a90 (Trill et al., 2022).
Observational data of soil physical and hydraulic properties are important for improving our understanding of hydrological processes. This is particularly relevant given current interest in the potential of land-based “natural flood management” measures (and related concepts: “nature-based solutions” and “working with natural processes”) to reduce flood risk. Therefore, a detailed survey of seven field sites under different land-uses and management practices in the Thames catchment, UK, was undertaken as part of the “LANDWISE” project. Measurements (n = 1300) included soil bulk density, estimated porosity, soil moisture and soil moisture retention, surface infiltration rate, and saturated hydraulic conductivity. Field sites comprised three arable fields on shallow soils over Limestone, two arable fields on free draining loamy soils over Chalk, and permanent grassland and broadleaf woodland on slowly permeable soil over Mudstone. Soil sampling points covered infield areas, trafficked areas (e.g. tramlines), and untrafficked margins. Samples were generally taken at five depths ranging from the soil surface to 100 cm below ground level. Soil saturated hydraulic conductivity measurements were made at 25 and 45 cm depths. Soil samples and measurements were taken between April and October 2021, with repeats taken pre- and post-harvest (arable sites). These data provide valuable insight into the hydrological behaviour of soils under contrasting management, including both conventional and innovative agricultural practices (e.g. herbal leys, mob grazing and controlled traffic). Dataset applications include: improving the performance of hydrological and land surface models, and validation of remotely-sensed soil observations. The dataset is publicly available at https://doi.org/10.5285/a32f775b-34dd-4f31-aafa-f88450eb7a90 (Trill et al., 2022).