21 October 2022 in IEEE Transactions on Vehicular Technology
In this paper, a new preamble waveform design and a corresponding minimum-point processing algorithm at receiver are proposed to perform radar sensing of communication signal echoes. In our design, we consider the millimeter wave (mmWave) 802.11ad/802.11ay communication frame format as a reference. Our proposed new preamble replaces the second pair of single-carrier (SC) Golay complementary code (GCC) used in the preamble of IEEE 802.11ad/802.11ay by orthogonal frequency-division multiplexing (OFDM) GCC waveform, resulting in a SC-OFDM GCC preamble waveform. At the receiver, a point-wise minimum operation is performed on the separate radar ambiguity functions (AF) of the SC-GCC and OFDM-GCC to improve the overall quality of the preamble AF. Furthermore, point-wise minimum processing is applied to fuse the communication data AF and the preamble AF, so as to further enhance the radar sensing quality of the entire communication frame. In addition, theoretical analysis of the performance gain of such radar AF fusion is provided. Both theoretical analysis and simulation results demonstrate that the newly proposed SC-OFDM GCC preamble design and the minimum-point fusion of data AF and preamble AF provide a significant performance improvement for automotive radar sensing. Specifically, the proposed SC-OFDM GCC preamble with minimum-point processing algorithm improves the peak-to-max-sidelobe ratio (PMSR) of radar AF over the conventional 802.11ad/802.11ay preamble. Moreover, the proposed preamble-data AF fusion technique further enhances the PMSR as well as the Doppler resolution over the existing joint radar communication systems (which process either the preamble echo or the data echo only). Finally, the proposed minimum-point processing and data AF fusion are extended from single-frame to multi-frame processing to further improve the Doppler resolution.
6 May 2026 in IEEE Transactions on Radar Systems
Radar imaging is a method for using spoiled transmit beams with multiple receive beams to speed up data collection with phased array radars. It introduces trade-offs in sensitivity and angular resolution and can also lead to data artifacts along beam cluster boundaries (boundaries between radar data obtained with adjacent spoiled transmit beams). We show that these data artifacts are due to asymmetric edge beams that occur when the spoiled transmit beam is too narrow for a given set of receive beams. We use both simulations and derivations to quantify the bias in reflectivity gradients along beam cluster boundaries. The derivations are also used to develop design criteria to ensure that the spoiled transmit beam is wide enough to produce symmetric edge beams that mitigate data artifacts.We use data collected with the Advanced Technology Demonstrator to show the presence of data artifacts when the spoiled transmit beam is too narrow and the absence of artifacts when the spoiled transmit beam is wide enough to produce symmetric edge beams. We also use a quantitative evaluation of the reflectivity-gradient biases in collected weather data to validate both our simulations and derivations.
23 March 2026 in IEEE Transactions on Vehicular Technology
The use of communication signal echoes for monostatic radar sensing is an emerging research area in the field of joint radar and communication (JRC). Block orthogonal frequency division multiplexing (OFDM) modulation with cyclic prefix (CP) is widely adopted by many wireless communication standards in the mm-wave band, such as IEEE 802.11ad and cellular vehicle-to-vehicle sidelink in the Frequency Range 2 band. The echoes/reflections of such transmissions may be exploited as a signal-of-opportunity for JRC. However, the cyclostationary property of the CP in block-OFDM signals gives rise to high side-lobes in the radar sensing output. The communication preamble also tends to yield high side-lobes at non-zero Doppler values. To address these challenges, we propose to use zero-prefix OFDM (ZP-OFDM) instead of CP-OFDM as the radar reference in the monostatic radar receiver, perform separate radar sensing on the preamble and data payload parts of the communication echo signal, then combine the separate sensing outputs using a novel radar fusion method, i.e., point-wise minimum selection (min-point selection (MPS) in short). Both analytical and simulation results of Doppler resolution, average/peak side-lobe level, and correct-delay–Doppler-bin detection rate (i.e., the detection rate evaluated at the delay–Doppler bin of the true target response) show that significant radar sensing performance improvement can be obtained by using the proposed method (ZP-OFDM-MPS).