A surface sensitivity study was performed on different transition-metal dichalcogenides (TMDs) under ambient conditions in order to understand which material is the most suitable for future device applications. Initially, Atomic Force Microscopy and Scanning Electron Microscopy studies were carried out over a period of 27 days on mechanically exfoliated flakes of 5 different TMDs, namely, MoS2, MoSe2, MoTe2, HfS2, and HfSe2. The most reactive were MoTe2 and HfSe2. HfSe2, in particular, showed surface protrusions after ambient exposure, reaching a height and width of approximately 60 nm after a single day. This study was later supplemented by Transmission Electron Microscopy (TEM) cross-sectional analysis, which showed hemispherical-shaped surface blisters that are amorphous in nature, approximately 180–240 nm tall and 420–540 nm wide, after 5 months of air exposure, as well as surface deformation in regions between these structures, related to surface oxidation. An X-ray photoelectron spectroscopy study of atmosphere exposed HfSe2 was conducted over various time scales, which indicated that the Hf undergoes a preferential reaction with oxygen as compared to the Se. Energy-Dispersive X-Ray Spectroscopy showed that the blisters are Se-rich; thus, it is theorised that HfO2 forms when the HfSe2 reacts in ambient, which in turn causes the Se atoms to be aggregated at the surface in the form of blisters. Overall, it is evident that air contact drastically affects the structural properties of TMD materials. This issue poses one of the biggest challenges for future TMD-based devices and technologies.
10 November 2024 in International Journal of Circuit Theory and Applications
Quantum computers comprising large‐scale arrays of qubits will enable complex algorithms to be executed to provide a quantum advantage for practical applications. A prerequisite for this milestone is a power‐efficient qubit control and detection system operating at cryogenic temperatures. Implementing such systems in complementary metal‐oxide‐semiconductor (CMOS) technology offers clear advantages in terms of scalability. Here, we present a fully integrated quantum dot array in which silicon quantum wells are co‐located with control and detection circuitry on the same die in a commercial 22‐nm fully depleted silicon‐on‐insulator (FDSOI) process. Our system comprises a two‐dimensional quantum dot array, integrated with 8 detectors and 32 injectors, operating at 3 K inside a cryo‐cooler. The power consumption of the control and detection circuitry is 2.5 mW per qubit without body biasing. The design utilizes 0.8‐V nominal devices. The setup allows us to verify discrete charge injection control and detection at the quantum dot array and demonstrate the feasibility of this architecture for scaling up the existing quantum core to hundreds and thousands of physical qubits.
Silicon carbide is a wide-bandgap semiconductor with an emerging complementary metal-oxide-semiconductor (CMOS) technology platform and it is widely deployed in high power and harsh environment electronics. This material is also attracting interest for quantum technologies through its crystal defects, which can act as spin-based qubits or single-photon sources. In this work, we assess the cryogenic performance of commercial power metal oxide semiconductor field effect transistors to evaluate their suitability for CMOS-compatible quantum electronics. We perform a statistical study of threshold voltage and subthreshold swing from 300 K down to 650 mK, focusing on reproducibility and variability. Our results show significant performance degradation at low temperatures, including large gate hysteresis, threshold voltage shifts, and subthreshold swing deterioration. These effects suggest instability in electrostatic control, likely due to carrier freeze-out and high interface trap density, which may pose challenges for the reliable use of this transistor technology towards the realisation of quantum devices or cryo-CMOS electronics.