1 February 2022 in International Journal of Machine Tools and Manufacture
19 June 2021 in Journal of the American Ceramic Society
28 February 2024 in International Journal of Machine Tools and Manufacture
26 April 2023 in Optics and Lasers in Engineering
1 April 2007 in Surface and Coatings Technology
5 January 2023 in SSRN Electronic Journal
Laser-induced forward transfer (LIFT) is proposed as an additive manufacturing technique for high-resolution metallic microstructures. However, a comprehensive study has been lacking to understand the printing regime for single microdroplets, which makes the LIFT difficult to print with high controllability. In this study, both LIFT experiments and thermal simulations are carried out to investigate the printing behaviors of a single microdroplet under different laser fluences and spot sizes. From the LIFT experiments, three printing behaviors are observed, including the non-release deposition, the single microdroplet deposition, and the splash deposition. The printing regime for single metal microdroplet deposition is obtained via varying laser fluence and spot size, where three printing behaviors are bounded by three thresholds. The laser fluence at the low-energy threshold is independent of the laser spot size, owing to the induced kinetic energy just overcoming the surface energy, which satisfies the ejection condition of Weber number greater than 1. The laser fluence at the high-energy threshold is observed to linearly increase with the laser spot size, indicating that the rupture mode of the molten film determined by the nominal capillary number is closely related to the laser spot size. By analyzing the physical basis of microdroplet ejection at the threshold, Weber number and nominal capillary number are proposed as the criteria for the low and high thresholds of single microdroplet deposition.