29 January 2014 in Nature Communications
Conventional interferometers usually utilize beam splitters for wave splitting and recombination. These interferometers are widely used for precision measurement. Their sensitivity for phase measurement is limited by the shot noise, which can be suppressed with squeezed states of light. Here we study a new type of interferometer in which the beam splitting and recombination elements are parametric amplifiers. We observe an improvement of 4.1±0.3 dB in signal-to-noise ratio compared with a conventional interferometer under the same operating condition, which is a 1.6-fold enhancement in rms phase measurement sensitivity beyond the shot noise limit. The improvement is due to signal enhancement. Combined with the squeezed state technique for shot noise suppression, this interferometer promises further improvement in sensitivity. Furthermore, because nonlinear processes are involved in this interferometer, we can couple a variety of different waves and form new types of hybrid interferometers, opening a door for many applications in metrology.
14 February 2012 in Physical Review A
A nonlinear interferometer uses nonlinear elements as beam splitters to split and to recombine optical waves for interference. As a result, the interference fringe size has a nonlinear dependence on the intensity of the field for phase sensing and leads to an enhanced phase signal. In this paper, a practical scheme of nonlinear interferometry for precision phase measurement is analyzed with parametric amplifiers as the nonlinear beam splitters. It is found that the signal due to phase shift is enhanced by a factor of the amplification gain as compared to a linear interferometer with the same phase-sensing light intensity while the quantum noise is kept at the vacuum level, thus, effectively increasing the signal-to-noise ratio (SNR) beyond the standard quantum limit. Furthermore, the scheme is not as sensitive to the detection loss as the linear scheme with a squeezed state for noise reduction. However, losses inside the interferometer limit the enhancement factor in SNR. We apply the concept to a Michelson interferometer but with parametric amplifiers involved for gravitational-wave detection. We find that effective power is increased by the gain of the amplifiers without actually increasing the cycling power inside the interferometer. Furthermore, the full benefits with squeezed input and variational output or the combination of a quantum nondemolition interferometer for sensitivity beyond the standard quantum limit apply here with even better results. Such a nonlinear interferometer will find wide applications in precision measurements.
1 August 2020 in APL Photonics
A new type of quantum interferometer was recently realized that employs parametric amplifiers (PAs) as the wave splitting and mixing elements. The quantum behavior stems from the PAs, which produce quantum entangled fields for probing the phase change signal in the interferometer. This type of quantum entangled interferometer exhibits some unique properties that are different from traditional beam splitter-based interferometers such as Mach–Zehnder interferometers. Because of these properties, it is superior to the traditional interferometers in many aspects, especially in the phase measurement sensitivity. We will review its unique properties and applications in quantum metrology and sensing, quantum information, and quantum state engineering.
24 July 2015 in Physical Review Letters
A new type of hybrid atom-light interferometer is demonstrated with atomic Raman amplification processes replacing the beam splitting elements in a traditional interferometer. This nonconventional interferometer involves correlated optical and atomic waves in the two arms. The correlation between atoms and light developed with the Raman process makes this interferometer different from conventional interferometers with linear beam splitters. It is observed that the high-contrast interference fringes are sensitive to the optical phase via a path change as well as the atomic phase via a magnetic field change. This new atom-light correlated hybrid interferometer is a sensitive probe of the atomic internal state and should find wide applications in precision measurement and quantum control with atoms and photons.
18 July 2013 in Physical Review Letters
Quantum noise is usually added in an amplification process through the internal degrees of the amplifier. Coupling the squeezed state to the internal degree can suppress the extra noise. Here, we demonstrate another method: when the internal degree of the amplifier is correlated with the input signal via quantum entanglement, quantum destructive interference between the input and the internal degree may result in noise reduction at the amplified output. We achieve a quantum noise reduction of 2.3 dB at the output and an improvement of $4.0\ifmmode\pm\else\textpm\fi{}0.2\text{ }\text{ }\mathrm{dB}$ in signal-to-noise ratio during the amplification process with a quantum noise gain of 4.5 dB.
12 August 2008 in Physical Review A
Quantum-state conversion among different information-carrying media is essential in a quantum network. It is found that the many schemes of quantum-state conversion can be unified under one simple process—that is, the parametric process of three-wave mixing. These schemes include quantum-state storage in atomic media, where a photonic state is converted to an atomic Raman state and vice versa, the frequency up- and down-conversion in photonic states, and photonic-state conversion to Brillouin phononic states and vice versa. The efficiency of conversion can in principle reach 100%, and the conversion process is noiseless. When the same idea is applied to a four-wave mixing process, unit conversion efficiency between a two-photon state and a single-photon state can be achieved. When applied to a two-photon entangled state in parametric down-conversion, entangled states of multiple photons can be generated.