A comprehensive regional investigation of the Eagle Ford Shale linking productivity to porosity-thickness (PHIH), lithology (), pore volume (PHIT), organic matter (TOC), and water-saturation () variations has not been presented to date. Therefore, isopach maps across the Eagle Ford Shale play west of the San Marcos Arch were constructed using thickness and log-calculated attributes such as TOC, , , and porosity to identify sweet spots and spatial distribution of these geologic characteristics that influence productivity in shale plays. The Upper Cretaceous Eagle Ford Shale in South Texas is an organic-rich, calcareous mudrock deposited during a second-order transgression of global sea level on a carbonate-dominated shelf updip from the older Sligo and Edwards (Stuart City) reef margins. Lithology and organic-matter deposition were controlled by fluvial input from the Woodbine delta in the northeast, upwelling along the Cretaceous shelf edge, and volcanic and clastic input from distant Laramide events to the north and west. Local oxygen minimum events along the South Texas margin contributed to the preservation of this organic-rich source rock related to the Cenomanian/Turonian global organic anoxic event (OAE2). Paleogeographic and deep-seated tectonic elements controlled the variations of lithology, amount and distribution of organic matter, and facies that have a profound impact on production quality. Petrophysical modeling was conducted to calculate total organic carbon, water saturation, lithology, and porosity of the Eagle Ford Group. Thickness maps, as well as PHIH maps, show multiple sweet spots across the study area. Components of the database were used as variables in kriging, and multivariate statistical analyses evaluated the impact of these variables on productivity. For example, TOC and clay volume () show an inverse relationship that is related to production. Mapping petrophysical parameters across a play serves as a tool to predict geologic drivers of productivity across the Eagle Ford taking the geologic heterogeneity into account.
10 June 2024 in Geochemistry, Geophysics, Geosystems
Rates of seismicity in the Delaware Basin of Texas and New Mexico increased from 10 earthquakes per year of local magnitude (ML) 3.0 and above in 2017 to more than 185 in 2022, coincident with increasing oil and gas production and wastewater re‐injection into strata shallow or deeper than producing intervals. Events of large magnitude—up to ML 5.4 to‐date—occur on faults extending into formations above the basement that have received more than four billion barrels of injection. Here, we demonstrate the link between injection geology, pore pressure evolution, fault stability, and induced seismicity in this region. We find that the injection targets are largely dolomitized platform carbonates with low (<5 vol.%) matrix porosity and fracture‐enhanced permeability with inherent heterogeneity in flow properties. A comprehensive, three‐dimensional geological model populated with reservoir properties is used for fluid flow modeling, with global calibration supplemented by dynamic injectivity data. Pore pressure changes with deep injection are up to 5 MPa from 1983 to 2023, increasing the native pore pressure state by 10% locally. Modeling results show that earthquakes occurring at distances of up to 30 km from deep injection have experienced small (<0.1 MPa) pore pressure increases, indicating that the faults hosting these earthquakes are highly sensitive to changes in effective stress and have lower frictional stability than the 0.6 generally assumed. These results serve as a critical step in understanding the stress changes that induce earthquakes in one of the most seismically active and geologically complex basins in the US.
The Delaware Basin of Texas and New Mexico is experiencing elevated levels of seismicity. There have been more than 130 earthquakes with local magnitudes of at least 3.0 recorded between 2017 and 2021, with earthquakes occurring in spatiotemporally isolated and diffuse clusters. Many of these events have been linked to oilfield operations such as hydraulic fracturing and wastewater disposal at multiple subsurface levels; however, the identification and characterization of earthquake-hosting faults have remained elusive. There are two distinct levels of faulting in the central region of the basin where most earthquakes have been measured. These fault systems include a contractional basement-rooted fault system and a shallow extensional fault system. Shallow faults trend parallel to and rotate along with, the azimuth of SHMAX, are vertically decoupled from the basement-rooted faults, accommodate dominantly dip-slip motion, and are the product of more recent processes including regional exhumation and anthropogenic influences. The shallow fault system is composed of northwest–southeast-striking, high angle, and parallel trending faults which delineate a series of elongate, narrow, and extensional graben. Although most apparent in 3D seismic reflection data, these narrow elongate graben features also are observed from interferometric synthetic aperture radar (InSAR) surface deformation measurements and can be delineated using well-located earthquakes. In contrast to the basin-compartmentalizing basement-rooted fault system, shallow faults do not display any shear movement indicators, and they have small throw displacement given their mapped length, producing an anomalous mean throw-to-length ratio of 1:1000. These characteristics indicate that these features are more segmented than can be mapped with conventional subsurface data. Much of the recent seismicity in the south-central Delaware Basin is associated with these faults and InSAR surface deformation observations find that these faults also may be slipping aseismically.
6 October 2022 in Bulletin of the Seismological Society of America
There is a well-known occurrence of felt seismicity and smaller seismic events in areas where hydraulic fracturing (HF) operations occur. The Eagle Ford shale play of south-central Texas experienced an increase in the rate of felt seismicity from 2014 to 2019, temporally coincident with petroleum development in the region. By mid-2019, the rate of seismicity decreased alongside a reduction in the rate of well completions, thus, prompting this investigation of the relationship between HF operations and geologic conditions that contribute to induced earthquake hazards. The goals of this work included mapping and conducting a geomechanical characterization of faults that delineate seismogenic regions of the Eagle Ford to understand the conditions that lead to inducing fault rupture. An integrated regional dataset composed of published data, wells, earthquakes, and interpretations from operators provided input for a 3D structural framework. Earthquake relocation analyses helped constrain the distribution of earthquakes that correlate to interpreted faults and enable identification of those that have been seismogenic. In-situ stress state of faults was analyzed to determine fault sensitivity in-situ. A spatiotemporal analysis of HF operations and earthquakes further revealed induced-earthquake clusters that are linked to specific faults. We show how seismogenic and aseismogenic fault systems relate to earthquakes by determining which faults are more sensitive and which faults have been seismogenic. Faulting is dominated by northwest–southwest-striking normal faults with 21% having hosted induced earthquakes since 2017. Faults in the Eagle Ford region have a geologically quasi-stable in-situ stress state. Using a conservative scheme, we directly associate 45% of earthquake ruptures to HF to build our analysis dataset. Of those events, 70% are located within 1 km of a mapped fault. Stress conditions on seismogenic faults show a wide range of sensitivity to rupture. This suggests that all faults close to HF operations should be considered as candidates likely to rupture.
An integrated workflow to estimate the hydrocarbon-in-place and recovery factor is applied in the Bakken-Three Forks petroleum system. Evaluating factors that control the generation and storage of hydrocarbon, such as the total organic carbon, maturity of shale, thickness, porosity, and permeability is a challenge in any shale play study. In addition, the hybrid nature of the Bakken petroleum system, where the source and reservoir rock are present within a short depth interval, adds complexity to the production interpretation and outlook of the play. One complexity is the contribution from Upper and Lower Bakken organic-rich shales to the production of horizontal wells completed in the Middle Bakken low-permeability laminated sandstone/siltstone and Upper Three Forks sandy/silty dolostone. We have performed geologic and petrophysical studies and calculate and map the hydrocarbon pore volume. For fluid characterization, we use three models to accurately cover a range of American Petroleum Institute gravity and gas/oil ratio. We evaluate the contribution of Upper and Lower Bakken to production by constructing simulation models and used that knowledge to estimate the recovery factor of the horizontal wells. Production depletes the Middle Bakken, creating a pressure difference between the Middle Bakken and the Upper/Lower Bakken, which in turn depletes the Upper/Lower Bakken. Vertical permeability controls production from the Upper and Lower Bakken, and higher vertical permeability increases the contribution of the two shale members. An understanding of the maturity and trap mechanism can help to explain the water-saturation distribution, and understanding these factors is crucial to any future development of the play.
25 October 2023 in Earth and Planetary Science Letters