14 August 2019 in IEEE Transactions on Applied Superconductivity
In this paper, we consider finite element models for high-temperature superconductors and compare two dual formulations, either magnetic-field conforming or magnetic-flux-density conforming. The electrical resistivity of superconductors is described by a power law and is strongly nonlinear. We compare the accuracy and the efficiency of the dual formulations by starting from simple considerations on the concavity / convexity of the constitutive law involved in each case. We then study the numerical behavior of each formulation in 1D, 2D, and 3D problems and compare their results against benchmarks. We draw general recommendations for the choice of a formulation, an iteration scheme for treating the corresponding linearized constitutive law, and a time-stepping interpolation scheme. This approach is extended to soft ferromagnetic materials with a saturation law. Given that our analysis shows that recommended formulations for treating ferromagnets are just the opposite of those for treating superconductors, we suggest a coupled formulation for systems where both types of materials are present. The coupled formulation is shown to be accurate and more efficient than single formulations applied indistinctly to all materials.
26 July 2021 in IEEE Transactions on Applied Superconductivity
In this article, we present and analyze the numerical stability of two coupled finite element formulations. The first one is the $h$ - $a$ -formulation and is well suited for modeling systems with superconductors and ferromagnetic materials. The second one, the so-called $t$ - $a$ -formulation with thin-shell approximation, applies for systems with thin superconducting domains. Both formulations involve two coupled unknown fields and are mixed on the coupling interfaces. Function spaces in mixed formulations must satisfy compatibility conditions to ensure stability of the problem and reliability of the numerical solution. We propose stable choices of function spaces using hierarchical basis functions and demonstrate the effectiveness of the approach on simple 2D examples.
8 December 2023 in IEEE Transactions on Applied Superconductivity
For finite element (FE) analysis of no-insulation (NI) high-temperature superconducting (HTS) pancake coils, the high aspect ratio of the turn-to-turn contact layer (T2TCL) leads to meshing difficulties which result in either poor quality mesh elements resulting in a decrease of the solution accuracy or a high number of degrees of freedom. We proposed to mitigate this issue by collapsing the T2TCL volume into a surface and using a so-called thin shell approximation (TSA). Previously, two TSA have been introduced, one to solve the heat equation and the other for an $\vec{H}$ −φ magnetodynamic formulation. In this work, we propose to combine the magnetodynamic and thermal TSA to create a coupled magneto-thermal TSA for three-dimensional FE analysis. Particular attention is paid to the detailed derivation of the coupling terms. In the context of NI HTS pancake coils, the TSA represents the electric and thermal contact resistance of the T2TCL. For the HTS coated conductor (CC) itself, an anisotropic homogenization is used which represents its multi-layered structure. In axial and azimuthal direction, it resolves the current sharing between the HTS and other layers of the CC. The coupled TSA formulation is verified against a reference model with volumetric T2TCL. The coupled TSA is shown to significantly reduce the solution time as well as the manual effort required for high-quality meshes of the T2TCL. The implementation is open-source and a reference implementation is made publicly available
29 July 2024 in Superconductor Science and Technology
In this paper, we propose the Coupled Axial and Transverse currents (I) (CATI) method, as an efficient and accurate finite element approach for modelling the electric and magnetic behavior of periodic composite superconducting conductors. The method consists of a pair of two-dimensional models coupled via circuit equations to account for the conductor geometrical periodicity. This allows to capture three-dimensional effects with two-dimensional models and leads to a significant reduction in computational time compared to conventional three-dimensional models. After presenting the method in detail, we verify it by comparison with reference finite element models, focussing on its application to twisted multifilamentary superconducting strands. In particular, we show that the CATI method captures the transition from uncoupled to coupled filaments, with accurate calculation of the interfilament coupling time constant. We then illustrate the capabilities of the method by generating detailed loss maps and magnetization curves of given strand types for a range of external transverse magnetic field excitations, with and without transport current.
19 June 2024 in IEEE Transactions on Applied Superconductivity
This paper deals with the modelling of superconducting and resistive wires with a helicoidal symmetry, subjected to an external field and a transport current. Helicoidal structures are three-dimensional, and therefore yield computationally intensive simulations in a Cartesian coordinate system. We show in this paper that by working instead with a helicoidal system of coordinates, the problem to solve can be made two-dimensional, drastically reducing the computational cost. We first introduce the state-of-the-art approach and apply it on the $h$ - $\phi$ -formulation with helicoidally symmetric boundary conditions (e.g., axial external magnetic field, with or without transport current), with an emphasis on the function space discretization. Then, we extend the approach to general boundary conditions (e.g., transverse external magnetic field) and we present numerical results with linear materials. In particular, we discuss the frequency-dependent losses in composite wires made of superconducting filaments embedded in a resistive matrix. Finally, we provide outlook to the application of the generalized model with nonlinear materials.
12 April 2023 in Superconductor Science and Technology
In this work we demonstrate the magnetic shielding ability of a stack of YBa2Cu3O7 tape annuli. The annuli are cut from a 46 mm wide second generation coated conductor deposited on a Ni-5at.%W alloy ferromagnetic (FM) substrate. The inner bore of the stacked tapes is 26 mm and the outer diameter is 45 mm. Three samples with different height (24 mm, 14.9 mm, 9.9 mm) are studied. All the experiments are carried out at both room temperature and liquid nitrogen temperature (77 K). The shielding efficiency is investigated when the magnetic field is applied either parallel to the axis of the stack (axial shielding) or perpendicular to it (transverse shielding). Under an axial field, magnetic shielding is found to be effective (SF ) up to magnetic flux densities of 0.67 T. The presence of the FM substrates is found to have two important consequences. First, the stack of annuli is able to shield transverse flux densities in spite of its layered structure. Second, a finite magnetic shielding effectiveness is demonstrated at room temperature. In order to understand the contribution of the FM substrates to the shielding mechanism, we use the experimental field dependence of the magnetic permeability as determined independently from hysteresis loop measurements on the same substrates. A finite-element homogenized model solved with an H–φ formulation is shown to successfully reproduce the shielding factor of the stack at room temperature and 77 K, both under axial and transverse applied fields. These models are also used to assess the influence of the critical current density and the magnetic permeability on the shielding efficiency. Finally, the results are used to predict the magnetic shielding properties of higher stacks, demonstrating their significant potential to shield axial fields of T (with SF ) at 77 K.