11 June 2025 in Measurement Science and Technology
Autonomous underwater vehicles (AUVs) play an increasingly important role in underwater operations, and continuous and stable high-precision positioning, navigation, and timing (PNT) information serves as the foundation for their optimal performance. On an AUV, the strap-down inertial navigation system (SINS), Doppler velocity log (DVL), and pressure sensor (PS) are common PNT sensors. To obtain highly precise and reliable navigation results, it is necessary to fuse the measurements of these three sensors. However, there is spatial inconsistency in the reference centers of them. In addition, there is a difference in height anomaly between the starting surface of depth (quasi-geoid) and the starting surface of geodetic height (reference ellipsoid) in the depth constraints. If these factors are not considered during fusion processing, the accuracy of the navigation solutions will decrease. To address the above issues, we present an adaptive filtering method with lever arm errors and height anomaly compensation for SINS/DVL/PS integrated navigation. Firstly, we introduce PS to constrain the height information of the underwater vehicle. Following that, during the depth constraint, when converting the depth observed by PS into geodetic height, the height anomaly correction is taken into account. At last, the measurement equation of SINS/DVL/PS integrated navigation considering lever arms among the three sensors and height anomaly are derived in detail. To verify the algorithm, AUV field experiments near the coast were conducted. The results show that the proposed method outperforms the method without considering lever arm errors with an improvement of about 10% in the planar direction of navigation accuracy. To further verify whether a larger lever arm has greater impact on accuracy, simulation experiments were designed. The results reveal that the errors increase with the lever arm values and there is a more significant improvement in accuracy after accounting for lever arm errors. These findings can provide theoretical basis for SINS/DVL/PS integrated navigation.
8 May 2026 in Measurement Science and Technology
Large-scale and precise underwater localization in open seas can significantly enhance the operational performance of autonomous underwater vehicles (AUVs) across multiple application scenarios. While long base line systems offer accuracy, their high cost and complex deployment are limiting. Single-beacon positioning is more cost-effective but suffers from insufficient accuracy and a lack of real-time capability. To overcome these limitations, this paper proposes a novel real-time AUV localization method integrating a single acoustic beacon, dual transducers, and a strapdown inertial navigation system (SINS). The core innovation utilizes the geometric constraints derived from the acoustic distance difference between the single beacon and the two transducers on the AUV to achieve initial 2D positioning. This is enhanced to 3D by incorporating depth sensor data. The position solutions are fused with SINS data using an extended Kalman filter to ensure system stability and robustness. Comprehensive validation incorporates numerical simulations—evaluating varying depths and sound speed profile errors—and semi-physical simulations driven by South China Sea field data, using ultra-short baseline positioning as a reference. Results confirm robust convergence against sensor noise, installation biases, and severe deep-water geometric degradation. The field-data validation further demonstrates high precision, showing a positioning error of ⩽8 m at an acoustic slant range of 16 km and ⩽7 m at a range of 8 km. This method provides a cost-efficient and practical solution for high-precision, large-scale deep-sea AUV navigation.
10 March 2026 in IEEE Journal of Oceanic Engineering
While dual-beacon positioning provides a theoretically adequate framework for underwater navigation, its practical implementation faces several inherent limitations, such as solution ambiguity, error propagation, trajectory-related constraints, and a lack of experimental validation. To address these issues, this article introduces a novel epochwise fusion method that integrates dual-beacon ranging with depth measurements from a pressure sensor and heading information from an SINS/compass system. This approach effectively resolves the ambiguity problem inherent in conventional dual-beacon positioning and exhibits strong robustness to intermittent data thanks to its per-epoch computational structure. The method is thoroughly validated through simulations and field experiments conducted in the South China Sea at depths of 3000 m. Results indicate that the algorithm’s performance is not influenced by trajectory shape but is primarily determined by the geometric configuration between the beacons and the unmanned underwater vehicles (UUV). Simulations covered linear, curved, and circular trajectories under various beacon deployment setups. During field trials, the system consistently achieved positioning accuracy within approximately 20 m at distances up to 25 km from the beacon centroid, outperforming traditional methods in both reliability and cost efficiency. Based on these findings, we offer practical recommendations for beacon deployment and survey path planning to enhance positioning performance in deep-sea applications.
1 January 2026 in IEEE Transactions on Instrumentation and Measurement