19 February 2014 in IEEE Transactions on Nanotechnology
A novel quartz crystal microbalance (QCM) humidity sensor using nanodiamond (ND) as sensing films has been presented in this paper. For evaluating the performance of ND-coated QCM humidity sensor, a series of humidity-sensing experiments were carried out by using both oscillating circuit and impedance analysis methods. Based on the large specific surface area and high mechanical modulus, the ND-coated sensor exhibited large humidity-sensing response and good stability. In addition, the resultant sensors displayed low hysteresis, good repeatability, and short response time. The influence of the depositing amount of ND on the sensor's performance has also been discussed. The result indicated that the stability of QCM humidity sensor showed an extreme decrease when the deposition amount of ND on QCM is large enough. The possible reason for this anomalous phenomenon is analyzed and discussed. This study suggests that ND could be a promising candidate material for developing high-performance QCM humidity sensor.
1 December 2015 in Optics Communications
1 January 2015 in Chinese Optics Letters
By studying the thermal-induced phase shift mechanism of an interferometric fiber-optic gyroscope (IFOG) sensing coil, a novel generalized expression based on a three-dimensional (3D) model is proposed. Compared with the traditional pure Shupe effect model, the simulation results show that the new 3D model, including elastic strain and the elasto-optical effect, can describe the thermal effect of the coils more accurately. Experiments with temperature change rates between -40°C and 70°C are performed to verify the effectiveness of the proposed generalized expression. The results of our work can guide researchers in identifying countermeasures to reduce the thermal-induced bias error in IFOG.