By using a cold cathode ion gun to ionize the nitrogen gas, the molecular-beam-epitaxy growth of GaN is carried out. The zinc-blende structure GaN epilayer grown on the GaAs(100) substrate with a narrow x-ray diffraction peak width (FWHM) of 23 min and a low carrier concentration of 1017 cm−3 is achieved. The surface optical phonon energies of cubic and hexagonal GaN are experimentally determined to be 82 and 90 meV, respectively.
We report the photoluminescence (PL) properties measured in situ from vacuum-deposited organic films of tris-(8-hydroxyquinoline) aluminum (Alq) doped with 4-(dicyanomethylene)-2-methyl-6(p-dimethylaminostyryl)-4H-pyran (DCM), where the red emission from the guest molecules is due to Förster energy transfer of excited state energy from host to guest. Both bare DCM-doped Alq (Alq:DCM) and bilayer Alq/Alq:DCM films have been studied, with the thickness of the Alq overlayer continuously varied in the latter case. The PL spectra from the bilayer structure contain no Alq contribution when its thickness is below 2.4 nm. Taking the value as the maximum distance for which the Alq exciton can travel in the film and still transfer its energy to a DCM molecule, the minimum DCM concentration in Alq:DCM necessary to produce red emission only can be estimated at 0.31 wt %. The most efficient red emission appears at the DCM concentration of about 1.7 wt %, at which more than 90% Alq-originated excitons are involved in the Förster energy transfer process. There exists a gradual red shift of the PL spectra with increasing DCM concentration, which can be attributed to the polarization and accompanying aggregation tendency of DCM molecules in Alq during the formation of the doped films.
The morphologic and luminescent behaviors of various 4-(dicyanomethylene)-2methyl-6-(p-dimethylaminostyryl)-4H-pyran (DCM) containing films have been investigated. This involves pure DCM layers deposited on top of a tris-(8-hydroxyquinoline) aluminum (Alq) layer or positioned between two Alq layer, DCM-doped Alq films, and periodically arranged Alq/DCM multilayer structures. The occurrence over a period of time of aggregation and permeation of DCM molecules at room temperature and at temperatures as low as is found in all the cases studied. Such a phenomenon will result in degradation of related organic light-emitting devices and is closely related to the electric polarity of the DCM molecule.
Synchrotron radiation photoemission study showed that the energy level alignment at the interface between , -bis(naphthalene-1-y1)- , -bis(phenyl) benzidine (NPB), a typical hole transport material, and Al could be adjusted by precovering a thin layer on Al. The interface dipoles so formed could shift both the highest occupied molecular orbital level of NPB and the secondary electron cutoff measured at the early stage of the NPB deposition. The barrier height for hole injection from Al to NPB could thus be lowered by as much as 0.98 eV, and the optimal thickness of the inserted layer was found to be 8–12 Å.